ISO 9183-2:2011
(Main)Tools for pressing - Wear plates for press dies - Part 2: Type B
Tools for pressing - Wear plates for press dies - Part 2: Type B
ISO 9183-2:2011 specifies the basic dimensions and tolerances, in millimetres, of wear plates, type B, intended for use mainly in large presses. lt also specifies the size and positions of the clearance holes for attachment. ISO 9183-2:2011 gives guidance on the materials and hardness, and specifies the designation of wear plates for press dies, type B, which meet the specified requirements.
Outillage de presse — Plaques de frottement — Partie 2: Type B
L'ISO 9183-2:2011 spécifie les dimensions de base et les tolérances, en millimètres, des plaques de frottement de type B, destinées généralement à être utilisées dans des grands moules. Elle spécifie également les dimensions et les positions des trous de passage pour fixation. L'ISO 9183-2:2011 donne des indications relatives aux matériaux et à la dureté, et spécifie la désignation des plaques de frottement satisfaisant aux exigences établies.
General Information
- Status
- Published
- Publication Date
- 12-Sep-2011
- Technical Committee
- ISO/TC 29/SC 8 - Tools for pressing and moulding
- Drafting Committee
- ISO/TC 29/SC 8 - Tools for pressing and moulding
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 08-Jul-2022
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 04-Dec-2010
Overview
ISO 9183-2:2011 is an international standard developed by the International Organization for Standardization (ISO) that specifies the basic dimensions, tolerances, and key characteristics of wear plates for press dies, specifically Type B wear plates. These wear plates are primarily designed for use in large pressing operations involving heavy-duty press dies. The standard provides detailed guidelines on the size, positioning of clearance holes for attachment, material recommendations, and hardness requirements to ensure compatibility and performance in industrial pressing applications.
This second edition of ISO 9183-2 updates and refines the dimensions and surface finish specifications to align with ISO 1302:2002, enhancing the practical usability of the wear plates in modern tooling and manufacturing environments.
Key Topics
Dimensions and Tolerances: ISO 9183-2:2011 defines the exact dimensions of wear plates in millimeters, including width, length, thickness, and placement of clearance holes for secure attachment during pressing operations. Precise tolerances ensure consistent fits and reliable performance.
Attachment Hole Specifications: The standard specifies the size and positioning of holes used to fasten the wear plates onto press dies, enabling standardized installation and maintenance.
Material and Hardness Guidance: While the manufacturer retains discretion over the specific materials and hardness selected, ISO 9183-2:2011 provides crucial recommendations to optimize wear resistance and durability of Type B wear plates.
Designation Method: The standard establishes a clear and consistent way to designate these wear plates by type, size, and reference number, facilitating easy identification and ordering. For example, a wear plate with a width of 70 mm and length of 100 mm is designated as:
Plaque de frottement ISO 9183-2 B - 70 × 100Surface Finish: Updates incorporate surface roughness values compliant with ISO 1302:2002 to enhance product documentation and quality control.
Applications
ISO 9183-2:2011 wear plates are critical components in large-scale pressing operations where high mechanical loads and repetitive motions cause friction and wear on press dies. Applications include:
Heavy Press Tooling in Automotive Manufacturing: Ensuring longevity and precision in stamping tools for body panels and structural parts.
Metal Forming Industry: Enhancing the wear resistance of dies used for shaping metal sheets or components under significant pressure.
Industrial Press Machines: Standardized wear plates offer reliable replacement parts to maintain tool integrity and reduce downtime.
Moulding and Forging Operations: Wear plates protect expensive die surfaces, improving equipment lifespan and product quality.
By adhering to ISO 9183-2 specifications, manufacturers and users benefit from improved interchangeability of components, predictable performance under operational stresses, and optimized maintenance cycles in demanding manufacturing settings.
Related Standards
Understanding ISO 9183-2 can be complemented by familiarity with the following related standards:
ISO 9183-1: Tools for Pressing - Wear plates for press dies - Part 1: Type A
Defines specifications for Type A wear plates used in smaller or different press configurations.ISO 1302:2002 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
Provides the guidelines on surface finish and roughness indicators used in conjunction with ISO 9183-2.ISO/TC 29 - Small Tools Committee
The technical committee responsible for the development and maintenance of tools and wear parts standards, including press tooling.
Adopting ISO 9183-2:2011 ensures compliance with international tooling benchmarks, promotes consistency across manufacturers, and supports effective quality control in press die wear plate manufacturing and application.
Frequently Asked Questions
ISO 9183-2:2011 is a standard published by the International Organization for Standardization (ISO). Its full title is "Tools for pressing - Wear plates for press dies - Part 2: Type B". This standard covers: ISO 9183-2:2011 specifies the basic dimensions and tolerances, in millimetres, of wear plates, type B, intended for use mainly in large presses. lt also specifies the size and positions of the clearance holes for attachment. ISO 9183-2:2011 gives guidance on the materials and hardness, and specifies the designation of wear plates for press dies, type B, which meet the specified requirements.
ISO 9183-2:2011 specifies the basic dimensions and tolerances, in millimetres, of wear plates, type B, intended for use mainly in large presses. lt also specifies the size and positions of the clearance holes for attachment. ISO 9183-2:2011 gives guidance on the materials and hardness, and specifies the designation of wear plates for press dies, type B, which meet the specified requirements.
ISO 9183-2:2011 is classified under the following ICS (International Classification for Standards) categories: 25.120.10 - Forging equipment. Presses. Shears. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 9183-2:2011 has the following relationships with other standards: It is inter standard links to ISO 9183-2:1993. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 9183-2:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 9183-2
Second edition
2011-09-15
Tools for pressing — Wear plates for
press dies —
Part 2:
Type B
Outillage de presse — Plaques de frottement —
Partie 2: Type B
Reference number
©
ISO 2011
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9183-2 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for
pressing and moulding.
This second edition cancels and replaces the first edition (ISO 9183-2:1993), of which it constitutes a minor
revision. In particular, the indication of surface textures has been updated in accordance with ISO 1302:2002.
ISO 9183 consists of the following parts, under the general title Tools for pressing — Wear plates for press
dies:
Part 1: Type A
Part 2: Ty
...
NORME ISO
INTERNATIONALE 9183-2
Deuxième édition
2011-09-15
Outillage de presse — Plaques de
frottement —
Partie 2:
Type B
Tools for pressing — Wear plates for press dies —
Part 2: Type B
Numéro de référence
©
ISO 2011
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2011
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2011 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 9183-2 a été élaborée par le comité technique ISO/TC 29, Petit outillage, sous-comité SC 8, Outillage
de presse et de moulage.
Cette deuxième édition annule et remplace la première édition (ISO 9183-2:1993), dont elle constitue une
révision mineure. En particulier, l'indication des états de surface a fait l'objet d'une mise à jour selon
l'ISO 1302:2002.
L'ISO 9183 comprend les parties suivantes, présentées sous le titre général Outillage de presse — Plaques
de frottement:
Partie 1: Type
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...