ISO/IEC 10733:1993/Amd 1:1996

INTERNATIONAL
ISO/IEC
STANDARD
10733
First edition
1993-06-01
AMENDMENT 1
1996-07-15
Information technology -
Telecommunications and information
exchange between systems - Elements of
management information related to 03
Network Layer standards
AMENDMENT 1:
Implementation conformance statement proformas
Technologies de I’informa tion -
T6l6communications et khange
d’information entre syst&mes -
&men ts d ‘information de ges Con
concernant /es normes de la couche R&eau OS/
AMENDEMENT 1: Proformes de dbclaration de conform26 de mise en
euvre
Reference number
ISO/l EC 10733: 1993/Amd. 1: 1996(E)

---------------------- Page: 1 ----------------------
ISO/IEC 10733 : 1993/Amd. 1 : 1996(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the International
Electrotechnical Commission) form the specialized system for worldwide standardization.
National bodies that are members of IS0 or IEC participate in the development of
International Standards through technical committees established by the respective
organization to deal with particular fields of technical activity. IS0 and IEC technical
committees collaborate in fields of mutual interest- Other international organizations,
governmental and non-governmental, in liaison with IS0 and IEC, also take part in the
work.
In the field of information technology, IS0 and IEC have established a joint technical
committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical
committee are circulated to national bodies for voting. Publication as an International
Standard requires approval by at least 75% of the national bodies casting a vote.
Amendment 1 to International Standard ISO/IEC 10733 : 1993 was prepared by Joint
Technical Committee ISO/IEC JTC 1, In.fom2ation technoZo,oy, Subcommittee SC 6,
Telecommunications and information exchange between systems.
This Amendment is also published by ITU-T as Rec. X.283/Amd. 1 but not as identical
text.
0 ISO/IEC 1996
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-12 11 Geneve l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO/IEC 10733 : 1993/Amd. 1 : 1996(E)
CXSOLIEC
Telecommunications and information exchange between systems
Information technology -
- Elements of management information related to OS1 Network Layer standards
AMENDMENT 1:
Implementation conformance statement proformas
Page 1
Add the foIlowing as the last paragraph qf Clause 1 “Scope “.
tt
D, E, F and G, which are integral parts of this International Standard provide ICS proformas associated with
Annexes
layer management information.
Network
Add the following reference to subclause 2. I.
tt
- ITU-T Recommendation X.724 (1993) 1 ISO/IEC 10165-6: 1994, Information tecl?noZogy - Open S’ystems
In tercoi7r7ection - Structure of management inftirmation: Requiremerzts and guidelines for implementation
conformance statement proformas associated with OSI management .
Page 2
Add the following references to subclause 2.2.
-
CCITT Recommendation X.209 (1988), Specification of basic encoding rules for abstract syntax notation
one (ASN. I).
Open Svstems Interconnection - 5pecification of Basic
ISO/IEC 8825: 1990, Inj&mation technology -
Encoding Rules for Abstract Syntax Notation One (ASN.~).
-
CCITT Recommendation X.290 (199 1), O,SI conjtirmance testing methodologv and framework for protocol
.
Recommendations for CCITT applications - General concepts.
ISO/IEC 9646-l : 1994, li?formation technologv - Open Svstenzs Interconnection - Conforn2ance testing
” I
methodology and jlamework - Part I: General concepts.
-
CCITT Recommendation X.291 (1992); 0511 conformance testing methodologv and framework for protocol
- Abstract test suite specification. ”
Recommendations for CCITT applications
Open Systenzs Interconnection - Confornzance testing
ISO/IEC 9646-2: 1994, Injtirmation technologv -
.
methodology and. jlamework - Part 2: Abstract Test Suite specification.
NOTE - ISO/IEC 9646-l : 1994 and ISOfIEC 9646-2: 1994 supersede ISO/IEC 9646-l : 199 1 and ISOLEC 9646-2:
1991 respectively. However, when this International Standard was under development, the previous editions were
valid and this International Standard is therefore based on these editions, which are listed below.
.
ISOAX 9646- 1: 199 1, I~zfi,rmation technolo~ - Open Systems Interconnection - Conformance testing
methodology andjkamework - Part 1: General concepts.
technology - Open Systems hterconnection - Conformance testing
ISOIIEC 9646-2: 199 1, In$ormation
test suite specification.
methodolo~ and framework - Part 2: Abstract
-
ITU-T Recommendation X.296 (1995), OS7 confbrmance testiJ7g methodology and framework for protocol
.z
Recommendations for ITU-T applications - Implementation Conformance Statements.
Open Systems Interconnection - Confbrmance testing
ISO/IEC 9646-7: 1995, Inforination fechnoZogv -
methodology and framework - Part 7: ImpZemen*;ation conformance statements.
1

---------------------- Page: 3 ----------------------
ISO/IEC 10733 : 1993/Amd.l : 1996(E) OI!SO/lEC
Open Systems Interconnection - Conftirmance testing
ISOAEC 9646-7: 1995, Information technoZogy -
I
methodology and framework - Part 7: ImpZementation conformance statements.
Page 4
Add the following abbreviations to clause 4:
MCS management conformance summary
MICS management information conformance statement
MOCS managed object conformance statement
MRCS managed relationship conformance statement
Page 92
RepZace clause 7 with the following.
7 Conformance
*m to this International Standard shall comply with the conformance requirements as
Implementations claiming to confor
defined in the fol lowing su .bclauses.
71 . Conformance requirements to this International Standard
7.1.1 Static conformance
role,
The implementation shall conform to the requirements of this International Standard in the manager role, the agent
or both roles. A claim of conformance to at least one role shall be made in Table D. 1 of this International Standard.
If a claim of conformance is made for support in the manager role, the implementation shall support at least one
management operation or notification or action of the managed objects specified by this International Standard. The
conformance requirements in the manager role for those management operations, notifications and actions are identified in
Table D. 3 and further tables referenced by Annex D.
If a claim of conformance is made for support in the agent role, the implementation shall support one or more instances of
the network subsystem managed object class identified in Table D.4 of this International Standard and further tables
referenced by Annex D.
at least one name
the agent role, the implementation shall support
If a claim of conformance is made for support in
Standard for each supported managed object.
binding identified in Table D.7 of this International
The implementation shall support the transfer syntax derived from the encoding rules specified in CCITT Rec. X.209 1
ISO/IEC 8825 named Cjoint-iso-ccitt asnl( 1) basicEncoding( 1)) for the abstract data types referenced by the definitions
for which support is claimed.
7.1.2 Dynamic conformance
the elements of procedure and
Implementations claiming to conform to this International Standard shall support
definitions of semantics corresponding to the definitions for which support is claimed.

---------------------- Page: 4 ----------------------
OI!SO/JEC
ISO/IEC 10733 : 1993/Amd. 1 : 1996(E)
7.1.3 Management implementation conformance statement requirements
Any MCS proforma, MICS proforma, MOCS proforma, and MEtCS proforma which conform to this International
Standard shall be technically identical to the proformas specified in Annexes D, E, F, and G preserving table numbering
and the index numbers of items, and differing only in pagination and page headers.
The supplier of an implementation which is claimed to conform to this International Standard shall complete a copy of the
management conformance summary (MCS) provided in Annex D as part of the conformance requirements together with
any other ICS proformas referenced as applicable from that MCS. Any MCS, MICS, MOCS, and MRCS which conform
to this International Standard shall:
-
describe an implementation which conforms to this International Standard;
-
have been completed in accordance with the instructions for completion given in ITU-T Rec. X.724 1
ISO/IEC 10165-6;
-
include the information necessary to uniquely identifjr both the supplier and the implementation.
72 . Protocol specific conformance requirements
The supplier of an implementation which is claimed to conform to this International Standard shall support at least one
protocol identified in Table D.2 of this International Standard.
7.2.1 Conformance to the CLNS
An implementation claming conformance to the CLNS in the agent role as a managed implementation shall:
conform to ITU-T Recommendation X.283 1 ISO/IEC 10733 as defined in 7.1;
a>
support the network entity MO, the CLNS MO, the NSAP MO and the linkage MO.
b)
7.2.2 Conformance to the CONS
An implementation claming conformance to the CONS in the agent role as a managed implementation shall:
conform to ITU-T Recommendation X.283 1 ISO/IEC 10733 as defined in 7.1;
a>
support the network entity MO, the CONS MO, the NSAP MO, the network connection MO and the linkage
b)
MO.
7.2.3 Conformance to the X.25 DTE
An implementation claming conformance to the X.25 DTE in the agent role as a managed implementation shall:
conform to ITU-T Recommendation X.283 1 ISO/IEC 10733 as defined in 7.1;
a)
support the X25 PLE DTE MO and at least one class derived from the virtual circuit DTE.
b)
7.2.4 Conformance to the X.25 DCE
An implementation claming conformance to the X.25 DCE in the agent role as a managed implementation shall:
conform to ITU-T Recommendation X.283 1 ISO/IEC 10733 as defined in 7.1;
a)
support the X25 PLE DCE MO and at least one class derived from the virtual circuit DCE.
W
Page 126
Add the following annexes after Annex C.

---------------------- Page: 5 ----------------------
@ISO/!lEK
ISO/IEC IO733 : 1993/Amd.l : 1996(E)
MCS proforma’ 9
D.1
Introduction
D.l.1 Purpose and structure
@KS) is a state-ment by a supplier that identifies an implementation and
The management conformance summary
provides information on whether the implementation claims conformance to any of the listed set of documents that specify
conformance requirements to OS1 management.
The MCS proforma is a document, in the form of a questionnaire that completed by the supplier of an
implementation becomes the MCS.
D.l.2 Instructions for completing t e MCS proforma to
Specific instructicm iS
The supplier of the implementation shall enter an explicit statement in each of the
provided in the text which precedes each table.
Symbols, abbreviations an
D. 1,3
For all annexes of this International Standard, the following corn on notations, defined in CCITT Rec. X.291 j ISOI’IEC
9646-2 and ITU-T Rec. X.296 1 ISO/IEC 9646-7 are used for the Status column:
m mandatory;
0
C conditional;
X prohibited;
- not applicable or out of scope.
NOTES
1 - ‘c’, ‘m’, and ‘0’ are prefixed by a k:’ when nested under a conditional or optional item of the same table;
options among a set of
2 - ‘0’ may be suffixed by ‘N (where N is a unique number) for mutually exclusive or selectable
status values. Support of at least one of the choices (from the items with the same values of N) is r .equired.
For all annexes of this International Standard, the following common notations, define in CCHTT Rec. X.291 1 ISOhEC -
9646-2 and ITU-T Rec. X.296 / ISO/IEC 9646-7 are used for the Support column:
Y implemented;
N not implemented;
- no answer required;
Ig the item is ignored (i.e. processed syntactically but not semantically).
so that it can be used for its intended
’ ) Users of this International Standard may freely reproduce the MCS profornra in this annex
purpose, and may further publish the completed MCS.
* ) Instructions for completing the MCS proforma are specified in ITU-T Rec.X.724 1 ISORK 10165-6 .
4

---------------------- Page: 6 ----------------------
ISO/IEC 10733 : 1993/Amd. 1 : 1996(E)
OI!SOAEC
D.2 Identification of the implementation
D.2.1 Date of statement
The supplier of the implementation shall enter the date of this statement in the box below. Use the format DD-MM-
YYYY.
/ Date of statement
D.2.2 Identification of the implementation
The supplier of the implementation shall enter information necessary to uniquely identify the implementation and the
system(s) in which it may reside, in the box below.
D.2.3 Contact
The supplier of the implementation shall provide information on whom to contact if there are any queries concerning the
content of the MCS, in the box below.
.
Identification of the International Standard in which the management information is
D.3
defined
The supplier of the implementation shall enter the title, reference number and date of the publication of the International
Standard which specifies the management information to which conformance is claimed, in the box below.
International Standard to which conformance is claimed
r--
D.3.1 Technical corrigenda implemented
The supplier of the implementation shall enter the reference numbers of implemented technical corrigenda which modify
the identified International Standard, in the box below.
5

---------------------- Page: 7 ----------------------
ISO/IEC 10733 : 1993/Amd.l : 1996(E) OISOIIEC
D.3.2 Amendments implemented
The supplier of the implementation shall state the titles and reference numbers of implemented amendments to the
identified International Standard, in the box below.
D.4 Management conformance summary
The supplier of implementation shall state the capabilities and features supported and provide summary of conformance
claims to Recommendations 1 International Standards using the tables in this annex.
The supplier of the implementation shall specify the roles that are supported, in Table D. I
Table D.l - Roles
Index Roles supported Status support Additional informatron
0.1
1 Manager role support
2 Agent role support 0.1
.
The supplier of the implementation shall specie the protocols that are supported, in Table D.2
Table D.2 - Protocol
Index Protocol supported Status support Additional information
1 CONS support
0.2
2
CLNS support 0.2
3 X.25DTE support
0.2
4 X. 25DCE support 0.2
The supplier of the implementation shall specie support for management information in the manager role, in Table D.3
Table D.3 - Manager role minimum conformance requirement
Status support Additional information
Index Item
Operations on managed objects cl
1
c2
2 Activate action for Connectionless-mode network service managed object
3 Deactivate action for Connectionless-mode network service managed object c2
4 Communications Alarm notification for Connectionless-mode network service c2
managed object
5 Communications information notification for Connectionless-mode network c2
service managed object
6 Object creation notification for Connectionless-mode network service managed c2
object
7 Object deletion notification for Connectionless-mode network service managed c2
object
State change notification for Connectionless-mode network service managed c2
8
object
c3
9 Activate action for Connection-mode network service managed object
10 c3
Deactivate action for Connection-mode network service managed object
11 Deactivate when no users action for Connection-mode network service c3
managed object
12 Object creation notification for Connection-mode network service managed c3
object
13 c3
Object deletion notification for Connection-mode network service managed
object
6

---------------------- Page: 8 ----------------------
ISO/IEC 10733 : 19931Amd. 1 : 1996(E)
OISOAEC
Table 0.3 (concluded) - Manager role minimum conformance requirement
Status support Additional information
Item
Index
c3
14 State change notification for Connection-mode network service managed
object
cl
15 Object creation notification for D series counts managed object
cl
16 Object deletion notification for D series counts managed object
c4
17 Activate action for Linkage managed object
c4
18 Deactivate action for Linkage managed object
c4
Communications Alarm notification for Linkage managed object
19
c4
20 Communications information notification for Linkage managed object
c4
21 Object creation notification for Linkage managed object
c4
22 Object deletion notification for Linkage managed object
c4
23 State change notification for Linkage managed object
c4
Object creation notification for NSAP managed object
24
c4
25 Object deletion notification for NSAP managed object
c4
26 Deactivate action for Network connection managed object
c3
27 Communications information notification for Network connection managed
object
c3
Object creation notification for Network connection managed object
28
c3
Object deletion notification for Network connection managed object
29
c3
30 Object creation notification for Network entity managed object
c3
31 Object deletion notification for Network entity managed object
c5
Object creation notification for Permanent virtual circuit -DCE managed object
32
c5
33 Object deletion notification for Permanent virtual circuit -DCE managed object
c5
State change notification for Permanent virtual circuit -DCE managed object
34
c6
35 Object creation notification for Permanent virtual circuit -DTE managed object
c6
36 Object deletion notification for Permanent virtual circuit -DTE managed object
c6
37 Communications information notification for Virtual call-DCE managed object
c5
38 Object creation notification for Virtual call-DCE managed object
c5
39 Object deletion notification for Virtual call-DCE managed object
c6
40 Deactivate action for Virtual call-DTE managed object
c6
Communications information notification for Virtual call-DTE managed object
41
c6
Object creation notification for Virtual call-DTE managed object
42
c6
43 Object deletion notification for Virtual call-DTE managed object
c7
44 Object creation notification for Virtual call IV managed object
c7
45 Object deletion notification for Virtual call IV managed object
c5
46 Activate action for X25PLE-DCE managed object
c5
Deactivate action for X25PLE-DCE managed object
47
c5
48 Object creation notification for X25PLE-DCE managed object
c5
49 Object deletion notification for X25PLE-DCE managed object
c5
50 State change notification for X25PLE-DCE managed object
c6
51 Activate action for X25PLE-DTE managed object
c6
52 Deactivate action for X25PLE-DTE managed object
c6
53 Communications Alarm notification for X25PLE-DTE managed object
c6
54 Object creation notification for X25PLE-DTE managed object
c6
Object deletion notification for X25PLE-DTE managed object
55
c6
56 State change notification for X25PLE-DTE managed object
c5
57 Object creation notification for X25PLEIVMO-DCE managed object
c5
Object deletion notification for X25PLEIVMO-DCE managed object
58
c6
Object creation notification for X25PLEIVMO-DTE managed object
59
c6
60 Object deletion notification for X25PLEIVMO-DTE managed object
cl: if DA/la then 0.3 else -
c2: if D. l/la and D.2/2a then 0.3 else -
c3: if D.l/la and D.2/la then 0.3 else -
c4: if D.l/la and (D.2/la or D.2/2a) then 0.3 else -
c5: if D.l/la and D.2/4a then 0.3 else -
c6: if D.l/la and D.2/3a then 0.3 else -
c7: if D.l/la and (D.2/3a or D.2/4a) then 0.3 else -
The supplier of the implementation shall specifjr support for management information in the agent role, in Table D.4

---------------------- Page: 9 ----------------------
ISO/IEC 10733 : 1993/Amd.l : 1996(E)
Table D.4 - Agent role minimum conformance requirement
c8: if D. 1/2a and (D.2/la or D.2/2a) then m else -
c9: if D.l/2a and D.2/la then m else -
~10: if D.l/2a and D.2/2a then m else -
cl 1: if D. 1/2a and D.2/3a then m else -
~12: if D. 1/2a and D.2/4a then m else -
~13: if DX2a and D.2/3a then 0.4 else -
~14: if D. 1/2a and D.2/4a then 0.5 else -
Table D.5 - Logging of event records
1
support Additional information
Status
Index
Does the implementation support logging of event records in agent role? cl5
1
~15: if D.l/2a then o else -
NOTE - Conformance to this International Standard does not require conformance to CCITT Rec. X.735 1 ISO/IEC 10164-6.
The supplier of the implementation shall provide information on claims of conformance to any of the International
Standards summarized in the following tables. For each International Standard that the supplier of the implementation
claims conformance to, the corresponding conformance statement(s) shall be completed, or referenced by, the MCS. The
supplier of the implementation shall complete the Support, Table numbers and Additional information columns.
In tables D-6, D.7 and D.8, the Status column is used to indicate whether the supplier of the implementation is required to
complete the referenced tables or referenced items. Conformance requirements are as specified in the referenced tables or
referenced items and are not changed by the value of the MCS Status column. Similarly, the Support column is used by the
supplier of the implementation to indicate completion of the referenced tables or referenced items.
Table D-6 - MOCS support summary
Table numbers Additional
Table numbers of Description Constraints and Status support
Index Identification of the
information
values of MOCS
document that includes the MOCS proforma
MOCS proforma
cl6
1 “ISO/IEC 10733” Table F. 1 - F.8 cLNS
cl7
2 “ISO/IEC 10733” Table F.9 - F. 15 CONS
“ISO/IEC 10733” Table F. 16 - F.21 dSenesCounts cl8
3
cl9
4 “ISO/IEC 10733” Table F.22 - F.29 linkage
c20
5 “ISO/IEC 10733” Table F.30 - F.34 nSAP
“ISO/IEC 10733” Table F.35 - F.40 networkConnection c21
6
8

---------------------- Page: 10 ----------------------
ISO/IEC 10733 : 1993/Amd. 1 : 1996(E)
OISOAEC
Table D.6 (concluded) - MOCS support summary
Constraints and Status support Table numbers Additional
Index Identification of the Table numbers of Description
information
document that includes the MOCS proforma values of MOCS
MOCS proforma
7 “ISO/IEC 10733” Table F.41 - F.45 networkEntity c22
Table F.46 - F.49 networkSubsystem m
8 “ISO/IEC 10733”
Table F.50 - F.55 permanentVirtualCircuit- - c23
9 “ISO/IEC 10733”
DCE
“ISO/IEC 10733” Table F.56 - F.61 permanentVirtuaICircuit- - c24
IO
DTE
“ISOIIEC 10733” Table F.62 - F.68 virtualCall-DCE ~25
11
12 “ISO/IEC 10733” Table F.69 - F.75 virtualCall-DTE c26
c27
13 “lSO/IEC 10733” Table F.76 - F.80 virtualCalllVM0
Table F.81 - F.87 x25PLE-DCE c28
14 “lSO/IEC 10733”
“ISO/IEC 10733” Table F.88 - F.95 x25PLE-DTE c29
15
r
“ISO/IEC 10733” Table F.96 - x25PLEIVMO-DCE c30
116
F.100
“ISO/IEC 10733” Table F. 101 - x25PLEIVMO-DTE c31
I17
F. 105
“ISO/IEC 10737” Table F.44 - F.47 communicationlnformati - c32
18
onRecord
“lSO/IEC 10164-l” Table C 1 - C.4 objectCreationRecord c33
19
c33
20 “ISO/IEC 10164-l” Table C.5 - C.8 objectDeletionRecord
Table C. 1 - C.4 c34
21 “ISO/IEC 10164-2” StateChangeRecord
“ISO/IEC 10164-4” Table C. 1 - C.4 alarmRecord c35
22
~16: if D.4/4a then m else -
~17: if D.4/6a then m eke -
cl& if D.4/17a then m else -
~19: if D.4/5a then m else -
~20: if D.4/3a then m else -
c2 1: if D.4/7a then m else -
~22: if D.4/2a then m else -
~23: if D.4/13a then m else -
~24: if D.4/12a then m else -
~25: if D.4/16a then m else -
~26: if D.4/15a then m else -
~27: if D.4/14a then m else -
~28: if D.4/9a then m else -
~29: if D.4/8a then m else -
~30: if D.4/11a then m else -
~31: if D.4/10a then m else -
~32: if D.j/la and (D.4/4a or D.4/5a or D.4/7a or D.4/15a or D.4/16a) then m else -
~33: if D.5/la then m else -
~34: if D.5/la and (D.4/4a or D.4/5a or D.4/6a or D.4/8a or D.4/9a or D.4/13a) then m else -
~35: if D.5/la and (D.4/4a or D.4/5a or D.4/8a) then m else -

---------------------- Page: 11 ----------------------
OISOAEC
ISOlIEC 10733 : 1993/Amd.l : 1996(E)
Table D.7 - MRCS support summary
Constraints and Status Support Table numbers Additional
Index Identification of the Table numbers Description
of MRCS information
document that includes the of MRCS values
M RCS proforma proforma
c36
1 “ISO/IEC 10733” Table G. l/l cLNS-networkEntity-
Automatic
P-P-
c36
2 “ISO/IEC 10733” Table G. l/2 cLNS-networkEntity-
Management
“CCITT Rec. X.723 c36
3 “ISO/IEC 10733” Table G. l/3
(1993) 1 ISO/IEC 10165-
5 : 1993”:
clProtocolMachine-entity
CONS-networkEntity- c37
4 “ISO/IEC 10733” Table G. l/4
Automatic
CONS-networkEntity- c37
5 “ISO/IEC 10733” Table G. l/5
Management
“CCITT Rec. X.723 c37
6 “ISO/IEC 10733” Table G. l/6
(1993) 1 ISO/IEC 10165-
5 : 1993”:
coProtocolMachine-entity
“ISO/IEC 10733” Table G. l/7 dSeriesCounts-virtualCall- c38
7
DCE-Automatic
c38
8 “ISO/IEC 10733” Table G. l/8 dSeriesCounts-virtualCall-
DCE-Management
c39
9 “ISO/IEC 10733” Table G. l/9 linkage-cLNS-Automatic
linkage-cLNS-Management - c39
10 “ISO/IEC 10733” Table G. l/l 0
Table G. l/l 1 linkage-CONS-Automatic c40
11 “ISO/IEC 10733”
“ISO/IEC 10733” Table G. l/l 2 linkage-CONS-Management - c40
12
13 “ISO/IEC 10733” Table G. l/l 3 nSAP-networkSubsystem- c41
Automatic
c41
14 “lSO/IEC 10733” Table G. l/l 4 nSAP-networkSubsystem-
Management
“CCITT Rec. X.723 c41
15 “ISO/IEC 10733” Table G. l/15
(1993) 1 ISO/IEC 10165-
.
5 : 1993”:
sap2-subsystem
16 “ISO/IEC 10733” Table G. l/l 6 networkConnection-CONS c42
“CCITT Rec. X.723 c42
17 “ISO/IEC 10733” Table G. l/17
(1993) 1 ISO/IEC 10165-
5 : 1993”:
SinglePeerConnection-
coProtocolMachine
18 “ISO/IEC 10733” Table G. l/l 8 networkEntity- c43
networkSubsystem-
Automatic
Table G. l/19 networkEntity- c43
19 “ISO/IEC 10733”
networkSubsystem-
Management
“CCITT Rec. X.723 c43
20 “ISO/IEC 10733” Table G. l/20
(1993) I ISO/IEC 10165-
5 : 1993”:
communicationsEntity-
subsystem
0.14
21 “ISO/IEC 10733” Table G. l/21 networkSubsystem-system
“CCITT Rec. X.723 0.14
22 “ISO/IEC 10733” Table G. I/22
(1993) I ISO/IEC 10165-
5 : 1993”:
subsystem-system
c44
“ISO/IEC 10733” Table G. I/23 permanentVirtuaICircuit-
23
DCE-x25PLE-DCE
c45
“ISO/IEC 10733” Table G. l/24 permanentVirtualCircuit-
24
DTE-x25PLE-DTE
“ISO/IEC 10733” Table G. l/25 virtualCall-DCE-x25PLE- c46
25
DCE-Automatic
“ISO/IEC 10733” Table G. l/26 virtualCall-DCE-x25PLE- c46
26
DCE-Management
“ISO/IEC 10733” Table G. l/27 virtualCall-DTE-x25PLE- c47
27
DTE
“ISO/IEC 10733” Table G. l/28 virtualCallIVMO-x25PLE c47
28
10

---------------------- Page: 12 ----------------------
OISOBEC ISO/IEC 10733 : 1993/Amd. 1 : 1996(E)
Table 0.7 (concluded) - MRCS support summary
Index Identification of the Table numbers Description Constraints and Status Support Table numbers Additional
document that includes the of MRCS values of MRCS information
M RCS proforma proforma
“ISO/IEC 10733” Table G. l/29 x25PLE- c48
29
networkSubsystem-
Automatic
Table G. ‘l/30 c48
30 “ISO/IEC 10733”’ x25PLE-
networkSubsystem-
Management
“ISO/IEC 10733” Table G. l/31 x25PLEIVMO- c49
31
networksu bsystem
“ISO/IEC 10164-6 ” Table D. l/l logRecord-log c50
32
~36: if D.4/4a then 0.6 else -
~37: if D.4/6a then 0.7 else -
~38: if D.4/17a then 0.8 else -
~39: if D.4/4a and D.4/5a then 0.9 else -
~40: if D.4/5a and D.4/6a then o. 10 else -
~41: if D.4/3a then o. 11 else -
~42: if D.4/7a then 0.12 else -
~43: if D.4/2a then 0.13 else -
~44: if D.4/13a then 0.15 else -
~45: if D.4/12a then 0.16 else -
~46: if D.4/16a then 0.17 else -
~47: if D.4/15a then 0.18 else -
~48: if D.4/8a or D.4/9a then o. 19 else -
~49: if D.4/10a or D.4/1 la then m else -
~50: if D.5/la then o else -
Table 0.8 - MICS support summary
Additional
Constraints and Status support Table numbers of
Index Identification of the Table numbers Description
information
values MICS
document that includes of MICS
the MICS proforma proforma
-
management c51
1 “ISO/IEC 10733” Table E. 1 to
operations
E.42
-
notifications ~52
2 “ISO/IEC 10733” Table E.43
-
actions c53
3 “ISO/IEC 10733” Table E.44
~51: if D.3/la then m else -
~52: if D.3/4a or D.3/5a or D.3/6a or D.3/7a or D3/8a or D.3/12a or D.3/13a or D.3/14a or D.3/15a or D.3/16a or D.3/19a
D.3/20a or D.3/21a or D.3/22a or D.3/23a or D.3/24a or D.3/25a or D.3/27a or D.3/28a or D.3/29a or D.3/30a or D.3/3la
or D.3/32a or D.3/33a or D.3/34a or D.3/35a or D3/36a or D.3/37a or D.3/38a or D.3/39a or D.3/41a or D.3/42a or
D.3/43a or D.3/44a or D.3/45a or D,3/48a or D.3/49a or D.3/5Oa or D.3/53a or D.3/54a or D.3/55a or D.3/56a or D.3/57a
or D.3/58a or D.3/59a D.3/60a then m else -
~53: ifD.3/2a or D.3/3a or D.3/9a or D.3/10a or D.3/1 la or D.3/17a or D.3/18a or D.3/26a or D.3/40a D.3/46a or D.3/47a
or D.3/51a or D.3/52a then m else -
11

---------------------- Page: 13 ----------------------
ISO/IEC 10733 : 1993/Amd.l : 1996(E) OISOLIEC
Annex E
(normative)
MICS proforma’)
El . Introduction
The purpose of this MICS proforma is to provide a mechanism for a supplier of an implementation which claims
conformance, in the manager role, to management information specified in this International Standard, to provide
conformance information in a standard form.
E2 . Instructions for completing the MICS profor
...