ISO 7755-11:2013
(Main)Hardmetal burrs - Part 11: Conical pointed-nose burrs (style M)
Hardmetal burrs - Part 11: Conical pointed-nose burrs (style M)
ISO 7755-11:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cone shape, with a pointed nose and designated by the symbol M.
Fraises-limes en métaux-durs — Partie 11: Fraises-limes coniques à bout pointu (forme M)
L'ISO 7755-11:2013 spécifie les dimensions principales de la partie coupante des fraises-limes en métaux-durs de forme conique à bout pointu et désignées par le symbole M.
General Information
- Status
- Published
- Publication Date
- 07-Aug-2013
- Current Stage
- 9060 - Close of review
- Completion Date
- 04-Jun-2029
Relations
- Effective Date
- 07-Oct-2012
Overview
ISO 7755-11:2013 is an international standard that specifies the key dimensions for hardmetal burrs of a specific conical shape with a pointed nose, identified as style M. Hardmetal burrs are cutting tools commonly used in machining, metalworking, and precision shaping tasks. This part of the ISO 7755 series defines the main geometric characteristics of the cutting part for these pointed-nose conical burrs, ensuring uniformity and interchangeability across manufacturers and users worldwide.
This standard is essential for manufacturers, tool designers, and end-users who require precise, reliable specifications for conical pointed-nose burrs used in various industries. The document also references ISO 7755-1, which covers tolerances on critical parameters such as cutting diameter and shank dimensions.
Key Specifications
ISO 7755-11:2013 outlines the following primary dimensions for conical pointed-nose burrs (style M):
- Cutting Diameter (d): Defines the diameter of the burr’s cutting part, with sizes ranging in millimeters such as 3, 6, 10, 12, and 16.
- Cutting Edge Length (l): The length of the cutting surface, measured from the flat part of the burr.
- Point Angle (α): The apex angle of the cone, varying between 14° and 30° depending on burr size.
The dimensions are specified to ensure consistent tool performance and compatibility in machining operations. The standard also provides guidelines on measurement practices and references broader tolerance and designation parameters covered in ISO 7755-1.
Additional Information:
- The point angle affects the precision and depth of material removal.
- The document includes an informative annex linking these designations to the ISO 13399 series for cutting tool data representation and exchange, improving digital tool management.
Applications
Conical pointed-nose hardmetal burrs standardized by ISO 7755-11 find practical applications in:
- Precision Machining: Used for detailed shaping, deburring, and contouring in metal, ceramics, composites, and hard materials.
- Die and Mold Making: Ideal for cutting and shaping complex geometries and internal contours.
- Aerospace and Automotive Manufacturing: Employed for surface finishing and edge preparation on components requiring high accuracy.
- Jewelry and Dental Laboratories: Precision tools for engraving, carving, and finishing small parts.
- General Fabrication Workshops: Useful for shaping, cleaning, and removing excess material in various metalworking tasks.
Standardized dimensioning ensures that burrs perform reliably in these exacting scenarios, optimizing tool life and machining quality.
Related Standards
ISO 7755-11:2013 is part of the comprehensive ISO 7755 series dedicated to hardmetal burrs, which includes:
- ISO 7755-1: General specifications covering tolerances, shank dimensions, and designations.
- ISO 7755-2 to ISO 7755-12: Define shapes such as cylindrical burrs, spherical burrs, flame burrs, cone burrs, and more.
- ISO 13399 Series: Provides cutting tool data representation and exchange standards, facilitating digital tool management and compatibility with ISO 7755-11’s designations.
By conforming to these standards, manufacturers and users benefit from globally harmonized tool specifications, improved supply chain efficiency, and enhanced precision in tool selection.
Keywords: ISO 7755-11, hardmetal burrs, conical pointed-nose burrs, cutting tool dimensions, machining burrs, precision cutting tools, tool standardization, ISO 7755 series, industrial burr specifications, cutting diameter, point angle, ISO 13399, metalworking tools.
ISO 7755-11:2013 - Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M) Released:8/8/2013
ISO 7755-11:2013 - Fraises-limes en métaux-durs — Partie 11: Fraises-limes coniques à bout pointu (forme M) Released:8/8/2013
Frequently Asked Questions
ISO 7755-11:2013 is a standard published by the International Organization for Standardization (ISO). Its full title is "Hardmetal burrs - Part 11: Conical pointed-nose burrs (style M)". This standard covers: ISO 7755-11:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cone shape, with a pointed nose and designated by the symbol M.
ISO 7755-11:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cone shape, with a pointed nose and designated by the symbol M.
ISO 7755-11:2013 is classified under the following ICS (International Classification for Standards) categories: 25.100.20 - Milling tools. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 7755-11:2013 has the following relationships with other standards: It is inter standard links to ISO 7755-11:1984. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 7755-11:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 7755-11
Second edition
2013-08-15
Hardmetal burrs —
Part 11:
Conical pointed-nose burrs (style M)
Fraises-limes en métaux-durs —
Partie 11: Fraises-limes coniques à bout pointu (forme M)
Reference number
©
ISO 2013
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
Annex A (informative) Relationship between designations in this part of ISO 7755 and the
ISO 13399 series . 3
Bibliography . 4
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development
...
NORME ISO
INTERNATIONALE 7755-11
Deuxième édition
2013-08-15
Fraises-limes en métaux-durs —
Partie 11:
Fraises-limes coniques à bout pointu
(forme M)
Hardmetal burrs —
Part 11: Conical pointed-nose burrs (style M)
Numéro de référence
©
ISO 2013
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Dimensions . 1
Annexe A (informative) Relation entre les désignations de la présente partie de l’ISO 7755 et
l’ISO 13399 (toutes les parties) . 2
Bibliographie . 3
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/CEI, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/CEI, Partie 2, www.iso.
org/directives.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant les
références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de l’élaboration
du document sont indiqués dans l’Introduction et/ou sur la liste ISO des déclarations de brevets reçues,
www.iso.org/patents.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...