ISO 12197:2016
(Main)Woodruff keyseat cutters - Dimensions
Woodruff keyseat cutters - Dimensions
ISO 12197:2016 specifies the dimensions of milling cutters intended for manufacturing woodruff keyseats in accordance with ISO 3912. Two types of woodruff keyseat cutters with cylindrical shank are specified: - woodruff keyseat cutters with cylindrical shank, in accordance with ISO 3338‑1; - woodruff keyseat cutters with flatted cylindrical shank, in accordance with ISO 3338‑2.
Fraises pour logement de clavettes-disques — Dimensions
ISO 12197:2016 spécifie les dimensions des fraises destinées à l'exécution de logement de clavettes-disques conformément à l'ISO 3912. Deux types de fraises pour logement de clavettes-disques à queue cylindrique sont spécifiés: - fraises pour logement de clavettes-disques, à queue cylindrique lisse conformément à l'ISO 3338‑1; - fraises pour logement de clavettes-disques, à queue cylindrique à méplat conformément à l'ISO 3338‑2.
General Information
- Status
- Published
- Publication Date
- 23-Oct-2016
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 31-Oct-2022
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 29-Jun-2013
Overview
ISO 12197:2016 specifies the dimensional requirements for Woodruff keyseat cutters used to machine keyseats in accordance with ISO 3912. This second edition (2016) is a minor revision of ISO 12197:1996 and adds an informative Annex A that maps the standard's designations to ISO 13399. The standard covers two types of cutters with cylindrical shank configurations: smooth cylindrical shanks (ISO 3338-1) and flatted cylindrical shanks (ISO 3338-2).
Why this standard matters: it provides a common dimensional reference for manufacturers, tool designers and procurement specialists to ensure consistent fit, interchangeability and predictable machining performance for Woodruff keyseat operations.
Key Topics
- Scope and applicability: dimensions for milling cutters intended to produce Woodruff (disk) keyseats per ISO 3912.
- Types of shanks:
- Smooth cylindrical shank - reference ISO 3338-1
- Flatted cylindrical shank - reference ISO 3338-2
- Dimensional data: the standard includes a key figure and a table of nominal cutter diameters, connection diameters, groove diameters, maximum cutting depth and overall lengths (see Figure 1 and Table 1 in the standard).
- Annex A mapping: informative relation between ISO 12197 designations and ISO 13399 tool data representations, aiding digital data exchange.
Applications
ISO 12197:2016 is directly applicable to:
- Manufacturers of Woodruff keyseat cutters who need to dimension tools for market-wide compatibility.
- Machine shops and tool procurement teams specifying cutters to meet ISO 3912 keyseat geometries.
- CAD/CAM and tool-data systems integrating cutter parameters using ISO 13399 mappings for automation and tooling libraries.
Practical value includes:
- Interchangeability: consistent cutter dimensions reduce fit issues and simplify stocking.
- Machining accuracy: standardized depths and diameters support predictable part assembly when combined with ISO 3912 key specifications.
- Data interoperability: Annex A enables alignment with ISO 13399 for tool management and digital workflows.
Related Standards
- ISO 3912 - Keyseating by Woodruff keys (specifies keyseat geometry to be manufactured)
- ISO 3338-1 - Smooth cylindrical shank characteristics for milling tools
- ISO 3338-2 - Flatted cylindrical shank characteristics for milling tools
- ISO 13399 - Representation and exchange of cutting tool data (related for digital mapping)
For implementation, consult the full ISO 12197:2016 document to view Figure 1, Table 1 and Annex A for exact dimensional references and the normative linkage to ISO 3912.
Frequently Asked Questions
ISO 12197:2016 is a standard published by the International Organization for Standardization (ISO). Its full title is "Woodruff keyseat cutters - Dimensions". This standard covers: ISO 12197:2016 specifies the dimensions of milling cutters intended for manufacturing woodruff keyseats in accordance with ISO 3912. Two types of woodruff keyseat cutters with cylindrical shank are specified: - woodruff keyseat cutters with cylindrical shank, in accordance with ISO 3338‑1; - woodruff keyseat cutters with flatted cylindrical shank, in accordance with ISO 3338‑2.
ISO 12197:2016 specifies the dimensions of milling cutters intended for manufacturing woodruff keyseats in accordance with ISO 3912. Two types of woodruff keyseat cutters with cylindrical shank are specified: - woodruff keyseat cutters with cylindrical shank, in accordance with ISO 3338‑1; - woodruff keyseat cutters with flatted cylindrical shank, in accordance with ISO 3338‑2.
ISO 12197:2016 is classified under the following ICS (International Classification for Standards) categories: 25.100.20 - Milling tools. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 12197:2016 has the following relationships with other standards: It is inter standard links to ISO 12197:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 12197:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 12197
Second edition
2016-11-01
Woodruff keyseat cutters —
Dimensions
Fraises pour logement de clavettes-disques — Dimensions
Reference number
©
ISO 2016
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
Annex A (informative) Relationship between designations in this International Standard
and ISO 13399 (all parts) . 3
Bibliography . 4
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the
...
NORME ISO
INTERNATIONALE 12197
Deuxième édition
2016-11-01
Fraises pour logement de clavettes-
disques — Dimensions
Woodruff keyseat cutters — Dimensions
Numéro de référence
©
ISO 2016
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2016, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – Tous droits réservés
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Dimensions . 1
Annexe A (informative) Relation entre les désignations dans la présente Norme
internationale et l’ISO 13399 (toutes les parties) . 3
Bibliographie . 4
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constitue
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...