Building and civil engineering sealants — Determination of adhesion/cohesion properties at constant temperature

The document specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in buildings and civil engineering works.

Mastics pour le bâtiment et le génie civil — Détermination des propriétés d'adhésivité/cohésion à température constante

Le présent document spécifie une méthode pour la détermination des propriétés d'adhésivité/cohésion des mastics de comportement essentiellement plastique qui sont utilisés dans les bâtiments et ouvrage de génie civil.

General Information

Status
Published
Publication Date
21-Mar-2021
Technical Committee
Drafting Committee
Current Stage
6060 - International Standard published
Start Date
22-Mar-2021
Due Date
12-Feb-2022
Completion Date
22-Mar-2021
Ref Project

Relations

Buy Standard

Standard
ISO 9046:2021 - Building and civil engineering sealants -- Determination of adhesion/cohesion properties at constant temperature
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 9046:2021 - Mastics pour le bâtiment et le génie civil -- Détermination des propriétés d'adhésivité/cohésion à température constante
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF 9046:Version 22-jan-2021 - Building and civil engineering sealants -- Determination of adhesion/cohesion properties at constant temperature
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF 9046:Version 05-feb-2021 - Mastics pour bâtiments et ouvrages de génie civil -- Détermination des propriétés d'adhésivité/cohésion a température constante
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 9046
Third edition
2021-03
Building and civil engineering
sealants — Determination of
adhesion/cohesion properties at
constant temperature
Mastics pour le bâtiment et le génie civil — Détermination des
propriétés d'adhésivité/cohésion à température constante
Reference number
ISO 9046:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 9046:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 9046:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
5.1 Substrate material . 1
5.2 Spacers . 1
5.3 Anti-adherent substrate . 2
5.4 Ventilated convection-type oven . 2
5.5 Container for water immersion . 2
5.6 Test machine . 2
5.7 Measuring device . 2
6 Preparation of test specimens . 2
7 Conditioning of test specimens . 4
7.1 Preconditioning . 4
7.2 Specific conditioning . 5
8 Procedure. 5
9 Test report . 5
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 9046:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works,
Subcommittee SC 8, Sealants, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/SS B02, Structures, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels a
...

NORME ISO
INTERNATIONALE 9046
Troisième édition
2021-03
Mastics pour le bâtiment et le génie
civil — Détermination des propriétés
d'adhésivité/cohésion à température
constante
Building and civil engineering sealants — Determination of
adhesion/cohesion properties at constant temperature
Numéro de référence
ISO 9046:2021(F)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 9046:2021(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2021 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 9046:2021(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Appareillage . 1
5.1 Supports . 1
5.2 Espaceurs . 2
5.3 Support anti-adhérent . 2
5.4 Étuve ventilée à convection . 2
5.5 Récipient pour l'immersion dans l'eau . 2
5.6 Appareil d’extension . 2
5.7 Dispositif de mesure. 2
6 Préparation des éprouvettes . 2
7 Conditionnement des éprouvettes . 4
7.1 Conditionnement initial . 4
7.2 Conditionnement spécifique . 5
8 Mode opératoire. 5
9 Rapport d’essai . 5
© ISO 2021 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 9046:2021(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. ISO shall not be held responsible for identifying
any or all such patent rights. Les détails concernant les références aux droits de propriété intellectuelle
ou autres droits analogues identifiés lors de l'élaboration du document sont indiqués dans l'Introduction
et/ou dans la liste des déclarations de brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 59, Bâtiments et ouvrages de génie
civil, sous-comité SC 8, Mastics, en collaboration avec le comité technique CEN/SS B02, Structures, du
Comité européen de normalisation (CEN) conformément à l’Accord de coopération technique entre l’ISO
et le CEN (Accord de Vienne).
Cette troisième édition annule et remplace la deuxième édition (ISO 9046:2002), qui a fait l’objet d’une
révision technique.
Les principales modifications par
...

INTERNATIONAL ISO
STANDARD 9046
Third edition
Building and civil engineering
sealants — Determination of
adhesion/cohesion properties at
constant temperature
PROOF/ÉPREUVE
Reference number
ISO 9046:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 9046:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 9046:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
5.1 Substrate material . 1
5.2 Spacers . 1
5.3 Anti-adherent substrate . 2
5.4 Ventilated convection-type oven . 2
5.5 Container for water immersion . 2
5.6 Test machine . 2
5.7 Measuring device . 2
6 Preparation of test specimens . 2
7 Conditioning of test specimens . 4
7.1 Preconditioning . 4
7.2 Specific conditioning . 5
8 Procedure. 5
9 Test report . 5
© ISO 2021 – All rights reserved PROOF/ÉPREUVE iii

---------------------- Page: 3 ----------------------
ISO 9046:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works,
Subcommittee SC 8, Sealants, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/SS B02, Structures, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 9046:2002), which has been technically
revised.
The m
...

NORME ISO
INTERNATIONALE 9046
Troisième édition
2021-03
Mastics pour bâtiments et ouvrages
de génie civil — Détermination des
propriétés d'adhésivité/cohésion à
température constante
Building and civil engineering sealants — Determination of
adhesion/cohesion properties at constant temperature
PROOF/ÉPREUVE
Numéro de référence
ISO 9046:2021(F)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 9046:2021(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii PROOF/ÉPREUVE © ISO 2021 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 9046:2021(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Appareillage . 1
5.1 Supports . 1
5.2 Espaceurs . 2
5.3 Support anti-adhérent . 2
5.4 Étuve ventilée à convection . 2
5.5 Récipient pour l'immersion dans l'eau . 2
5.6 Appareil d’extension . 2
5.7 Dispositif de mesure. 2
6 Préparation des éprouvettes . 2
7 Conditionnement des éprouvettes . 4
7.1 Conditionnement initial . 4
7.2 Conditionnement spécifique . 5
8 Mode opératoire. 5
9 Rapport d’essai . 5
© ISO 2021 – Tous droits réservés PROOF/ÉPREUVE iii

---------------------- Page: 3 ----------------------
ISO 9046:2021(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. ISO shall not be held responsible for identifying
any or all such patent rights. Les détails concernant les références aux droits de propriété intellectuelle
ou autres droits analogues identifiés lors de l'élaboration du document sont indiqués dans l'Introduction
et/ou dans la liste des déclarations de brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: www .iso .org/ iso/ avant -propos .html.
Le présent document a été élaboré par le comité technique ISO/TC 59, Bâtiments et ouvrages de génie
civil, sous-comité SC 8, Mastics.
Cette troisième édition annule et remplace la deuxième édition (ISO 9046:2002), qui a fait l’objet d’une
révision technique.
Les principales modifications par rapport à l’édition précédente sont les suivantes:
— modification du titre
— modification de la vitesse de l’appareil d'extension
— modification de l’exi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.