iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 2358:1972

(Main)

Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series

Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series

Écrous de blocage hexagonaux en acier à freinage interne — Dimensions — Série métrique

General Information

Status
Withdrawn
Publication Date
30-Sep-1972
Withdrawal Date
30-Sep-1972
ICS
21.060.20 - Nuts
Technical Committee
ISO/TC 2 - Fasteners
Drafting Committee
ISO/TC 2 - Fasteners
Current Stage
9599 - Withdrawal of International Standard
Completion Date
01-May-1984
Ref Project

Relations

Revised
ISO 7042:1983 - Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12
Effective Date
15-Apr-2008
Revised
ISO 7040:1983 - Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and 10
Effective Date
15-Apr-2008
Revised
ISO 7041:1983 - Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
Effective Date
15-Apr-2008
Revised
ISO 7044:1983 - Prevailing torque type all-metal hexagon nuts with flange
Effective Date
15-Apr-2008
Revised
ISO 7043:1983 - Prevailing torque type hexagon nuts with flange (with non-metallic insert)
Effective Date
15-Apr-2008

Buy Standard

ISO 2358:1972 - Prevailing torque-type steel hexagon locknuts -- Dimensions -- Metric seriesISO 2358:1972 - Prevailing torque-type steel hexagon locknuts -- Dimensions -- Metric series
PreviousNext
Standard
ISO 2358:1972 - Prevailing torque-type steel hexagon locknuts -- Dimensions -- Metric series
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 2358:1972 - Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series Released:10/1/1972ISO 2358:1972 - Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series Released:10/1/1972
PreviousNext
Standard
ISO 2358:1972 - Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series Released:10/1/1972
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

,ax*%
INTERNATIONAL STANDARD (@y 2358
k!@ 8
' .- ~
INT'ERNATIONAL ORGANIZATION FOR STANOAROIZATION 44EXL7YHAPORHAR OPTAHH3AUHR I70 CTAHLIAPTHUUHH *ORGANISATION INTERNATIONALE DE NORMALISATION
PrevaiIing.torque-type steel hexagon locknuts -
Dimensions - Metric series
First edition - 1972-10-01
UDC 621.882.q 621.882.55- // Ref. No. IS0 2358-1972 (E)
f
Descriptors : hexagonal nuts, self locking nuts, dimensions.
Price based on 1 page

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2358 was drawn up by Technical Committee ISO/TC 2,
Bolts, nuts and accessories.
It was approved in August 1971 by the Member Bodies of the following countries :
Austria I reland South Africa, Rep. of
Belgium Italy Spain
Canada Japan Sweden
Czechoslovakia Netherlands Switzerland
New Zealand Thailand
Egypt, Arab Rep. of
Finland Turkey
Norway
Germany Poland United Kingdom
Hungary Portugal U.S.S. R.
India Romania
The Member Body of the following country expressed disapproval of the document
on technical grounds :
France
O International Organization for Standardization. 1972 0
Printed in Switzerland

---------------------- Page: 2 ----
...

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXnYHAPOnHA# OPïAHH3AUHR II0 CTAHAAPTW3AUHH -ORGANISATION INTERNATIONALE DE NORMALISATION
Écrous de blocage hexagonaux en acier$ freinage interne -
Dimensions - Série métrique
Première edition - 1972-10-01
.OtA f +
I
Réf. NO : IS0 2358-1972 (FI
621.882.s- - / 87
Descripteurs : écrou hexagonal, écrou autobloquant, dimension
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
IS0 (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (Comités Membres ISO). L'élaboration de
est confiée aux Comités Techniques ISO. Chaque Comité
Normes Internationales
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'ISO.
La Norme Internationale IS0 2358 a été établie par le Comité Technique ISO/TC 2,
Boulons, écrous et accessoires.
Elle fut approuvée en août 1971 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d' Roumanie
Inde
Allemagne Irlande Royaume-Uni
AuTriche Italie Suède
Suisse
Belgique Japon
Canada Norvège Tchécoslovaquie
Egypte, Rép. arabe d' Nouvelle-Zélande Thaïlande
Espagne Pays-Bas Turquie
Finlande Pologne U.R.S.S.
Hongrie Portugal
Le Comité Membre du pays suivant a désapprouvé le document pour des raisons
techniques :
France
e Organisation Internationale de Normalisation, 1972 0
Imprimé en Suisse

---------------------- Page: 2 ----------------------
~
NORME INTERNATIONALE IS0 23581972 (FI
Ecrous de blocage hexagonaux en acier à fr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 898-3:2018/Amd 1:2020(Amendment)
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Draft
    1 page
    English language
    sale 15% off
ISO
ISO 3506-2:2020(Main)
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes

This document specifies the mechanical and physical properties of nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for nuts. ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties. Nuts conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures. NOTE 1 Fasteners conforming to the requirements of this document are used without restriction in applications ranging from ?20 °C to +150 °C; however, fasteners conforming to this document are also used for applications outside this range down to ?196 °C and up to +300 °C. For more details, see ISO 3506-6. Outside the temperature range of ?20 °C to +150 °C, it is the responsibility of the user to determine the appropriate choice for a given application, in consultation with an experienced fastener metallurgist and by taking into account e.g. stainless steel composition, duration of exposure at elevated or low temperature, the effect of the temperature on the fastener mechanical properties and clamped parts, and the corrosive service environment of the bolted joint. NOTE 2 ISO 3506‑5[1] is developed in order to assist in the selection of appropriate stainless steel grades and property classes intended for use at temperatures up to +800 °C. This document applies to nuts: — with ISO metric thread in accordance with ISO 68‑1, — with diameter/pitch combinations in accordance with ISO 261 and ISO 262, — with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3, — with thread tolerances in accordance with ISO 965‑1 and ISO 965‑2, — with specified property classes, including proof load, — with different nut styles: thin nuts, regular nuts and high nuts, — with a minimum nut height m ≥ 0,45D, — with a minimum outside diameter or width across flats s ≥ 1,45D (see Annex A), — of any shape, and — able to mate with bolts, screws and studs with property classes in accordance with ISO 3506‑1. Stainless steel grades and property classes can be used for sizes outside the diameter limits of this document (i.e. for D D > 39 mm), provided that all applicable chemical, mechanical and physical requirements are met. This document does not specify requirements for functional properties such as: — torque/clamp force properties, — prevailing torque properties, or — weldability. [1] Under preparation.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off
ISO
ISO 898-3:2018(Main)
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes

This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898‑1 and ISO 898‑2. NOTE 1 These types of washers can also be used with other fasteners such as screws forming their own mating thread. Washers that conform to the requirements of this document are evaluated at an ambient temperature range of 10 °C to 35 °C. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures. NOTE 2 Washers conforming to the requirements of this document are used in applications ranging from −50 °C to +150 °C. Users are advised to consult an experienced fastener expert for temperatures outside this range and up to a maximum temperature of +300 °C when determining appropriate choices, or for critical applications. This document is applicable to the following flat captive and non-captive washers made of carbon steel or alloy steel, with thickness from 0,2 mm to 12 mm: — plain washers (with or without knurls, ribs or chamfers); — square washers; — square hole washers; — shaped plates. It does not specify requirements for the following properties: — corrosion resistance; — weldability.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO 4032:2023(Main)
Fasteners — Hexagon regular nuts (style 1)

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B. NOTE For nuts with sizes D D > M39, see Annex A. If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off
  • Draft
    9 pages
    French language
    sale 15% off
ISO
ISO 898-2:2022(Main)
Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature range of 10 °C to 35 °C. This document applies to nuts: — with ISO metric thread (see ISO 68-1), — with diameter/pitch combinations according to ISO 261 and ISO 262, — with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3, — with thread tolerances according to ISO 965-1, ISO 965-2 or ISO 965-5, — with specified property classes 04, 05, 5, 6, 8, 10 and 12 including proof load, — of three different nut styles (see 5.1): regular nuts (style 1), high nuts (style 2) and thin nuts (style 0), — with a minimum outside diameter or width across flats s ≥ 1,45D, — able to mate with bolts, screws and studs with property classes in accordance with ISO 898-1 (see Annex B), and — intended to be used in applications ranging from –50 °C to +150 °C, or up to +300 °C. WARNING — Nuts conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in applications ranging from –50 °C to +150 °C; however, these nuts are also used outside this range and up to +300 °C for specific applications. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on the service environment conditions of the assembly (see also 7.1). For additional specifications applicable to hot dip galvanized nuts, see ISO 10684. For nuts designed for particular applications, see ISO/TR 16224. This document does not specify requirements for functional properties such as: — prevailing torque properties (see ISO 2320), — torque/clamp force properties (see ISO 16047 for test method), — weldability, or — corrosion resistance.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
ISO
ISO 898-3:2018/Amd 1:2020(Amendment)
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Draft
    1 page
    English language
    sale 15% off
ISO
ISO 3506-2:2020(Main)
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes

This document specifies the mechanical and physical properties of nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for nuts. ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties. Nuts conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures. NOTE 1 Fasteners conforming to the requirements of this document are used without restriction in applications ranging from ?20 °C to +150 °C; however, fasteners conforming to this document are also used for applications outside this range down to ?196 °C and up to +300 °C. For more details, see ISO 3506-6. Outside the temperature range of ?20 °C to +150 °C, it is the responsibility of the user to determine the appropriate choice for a given application, in consultation with an experienced fastener metallurgist and by taking into account e.g. stainless steel composition, duration of exposure at elevated or low temperature, the effect of the temperature on the fastener mechanical properties and clamped parts, and the corrosive service environment of the bolted joint. NOTE 2 ISO 3506‑5[1] is developed in order to assist in the selection of appropriate stainless steel grades and property classes intended for use at temperatures up to +800 °C. This document applies to nuts: — with ISO metric thread in accordance with ISO 68‑1, — with diameter/pitch combinations in accordance with ISO 261 and ISO 262, — with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3, — with thread tolerances in accordance with ISO 965‑1 and ISO 965‑2, — with specified property classes, including proof load, — with different nut styles: thin nuts, regular nuts and high nuts, — with a minimum nut height m ≥ 0,45D, — with a minimum outside diameter or width across flats s ≥ 1,45D (see Annex A), — of any shape, and — able to mate with bolts, screws and studs with property classes in accordance with ISO 3506‑1. Stainless steel grades and property classes can be used for sizes outside the diameter limits of this document (i.e. for D D > 39 mm), provided that all applicable chemical, mechanical and physical requirements are met. This document does not specify requirements for functional properties such as: — torque/clamp force properties, — prevailing torque properties, or — weldability. [1] Under preparation.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off
ISO
ISO 898-3:2018(Main)
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes

This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898‑1 and ISO 898‑2. NOTE 1 These types of washers can also be used with other fasteners such as screws forming their own mating thread. Washers that conform to the requirements of this document are evaluated at an ambient temperature range of 10 °C to 35 °C. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures. NOTE 2 Washers conforming to the requirements of this document are used in applications ranging from −50 °C to +150 °C. Users are advised to consult an experienced fastener expert for temperatures outside this range and up to a maximum temperature of +300 °C when determining appropriate choices, or for critical applications. This document is applicable to the following flat captive and non-captive washers made of carbon steel or alloy steel, with thickness from 0,2 mm to 12 mm: — plain washers (with or without knurls, ribs or chamfers); — square washers; — square hole washers; — shaped plates. It does not specify requirements for the following properties: — corrosion resistance; — weldability.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO 2320:2015(Main)
Fasteners — Prevailing torque steel nuts — Functional properties

ISO 2320:2015 specifies the functional properties for prevailing torque steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a combined test method to determine the prevailing torque properties and the torque/clamp force properties at the same time. It applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts: - with triangular ISO thread in accordance with ISO 68‑1; - with diameter/pitch combination in accordance with ISO 261 and ISO 262; - with coarse pitch thread M5 to M39 or with fine pitch thread M8 × 1 to M39 × 3; - with thread tolerances in accordance with ISO 965-2; - with mechanical properties in accordance with ISO 898‑2; Prevailing torque values specified in this standard are based on laboratory test conditions. NOTE 1 Actual prevailing torques in practical application can vary. NOTE 2 All metal type nuts conforming to the requirements of this International Standard are used in applications ranging from −50 °C to +150 °C. NOTE 3 Non-metallic insert type nuts conforming to the requirements of this International Standard are used in applications ranging from −50 °C to +120 °C. WARNING ? Temperatures outside the ambient temperature range can influence the functional properties (torque/clamp force and prevailing torque properties), see Annex A.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO 21670:2014(Main)
Fasteners — Hexagon weld nuts with flange

ISO 21670:2014 specifies characteristics for hexagon weld nuts with flange, with sizes M5 to M16 (coarse thread) or d = 8 mm to 16 mm (fine pitch thread), of product grade A. Weld nuts conforming to ISO 21670:2014 are suitable for use with bolts of property classes up to 10.9 according to ISO 898‑1.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off