ISO 24534-5:2011/Amd 1:2019

INTERNATIONAL ISO
STANDARD 24534-5
First edition
2011-12-15
AMENDMENT 1
2019-02
Intelligent transport systems —
Automatic vehicle and equipment
identification — Electronic
Registration Identification (ERI) for
vehicles —
Part 5:
Secure communications using
symmetrical techniques
AMENDMENT 1
Systèmes de transport intelligents — Identification automatique
des véhicules et des équipements — Identification d'enregistrement
électronique (ERI) pour les véhicules —
Partie 5: Communications sécurisées utilisant des techniques
symétriques
AMENDEMENT 1
Reference number
ISO 24534-5:2011/Amd.1:2019(E)
©
ISO 2019
ISO 24534-5:2011/Amd.1:2019(E)

© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 24534-5:2011/Amd.1:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
ISO 24534-5:2011/Amd.1:2019(E)
Intelligent transport systems — Automatic vehicle and
equipment identification — Electronic Registration
Identification (ERI) for vehicles —
Part 5:
Secure communications using symmetrical techniques
AMENDMENT 1
Page 19, 6.2.3.2
Replace definition of SecretKeyEriTransactions by
SecretKeyEriTransactions TRANSACTION ::= { mutualAuthentication1 |
mutualAuthentication2 | getSecretKeyEriData | setSecretKeyEriData |
commissionSecretKeyErt | decommissionSecretKeyErt | updateAccessControlList |
getCipertextAccessControlListEntry | endOfSession, .}

Page 27, 6.3.1
In third paragraph, replace
(CANONICAL-PER) ALIGNED
by
(CANONICAL-PER) UNALIGNED
Page 27, 6.4.1
In first paragraph, replace
(CANONICAL-PER) ALIGNED
by
(CANONICAL-PER) UNALIGNED
Page 31, Annex A
Replace the annex by the following one.
ISO 24534-5:2011/Amd.1:2019(E)

Annex A
(normative)
ASN.1 module
A.1 Overview
The following ASN.1 modules are specified in this normative annex:
— The normative module EriSecretKeyTransactionsModule {iso(1) standard(0) iso24535 (24534)
secretKeyTransactions (5) version1 (1)} in
— The informative module AviEriDSRCData {iso(1) standard(0) iso24534 (24534) transactions (2)
example1(1) version1 (1)}
In case the ASN.1 specifications given in this Annex are not compliant with illustrations or specifications
provided elsewhere in this International standard, the specifications given in this Annex shall prevail.
The ASN.1 modules contained in this Annex will be published on http: //standards .iso .org/iso/24534/ -5.
A.2 Module EriSecretKeyTransactionsModule
EriSecretKeyTransactionsModule {iso(1) standard(0) iso24535 (24534)
secretKeyTransactions (5) version1 (1)}
DEFINITIONS AUTOMATIC TAGS ::= BEGIN

SecretKeyEriPdu ::= CHOICE {
requestPdu        Sec
...