ISO 2585:1972
(Main)Slotting cutters with plain bore and key drive - Metric series
Slotting cutters with plain bore and key drive - Metric series
Specifies the dimensions of slotting cutters with straigth-sided teeth and with helical teeth. The range of outside diameters is taken from ISO 523.
Fraises 1 taille à rainurer, à alésage lisse, à entraînement par clavette — Série métrique
General Information
- Status
- Published
- Publication Date
- 30-Nov-1972
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 23-Dec-2022
- Completion Date
- 13-Dec-2025
Relations
- Consolidated By
ISO 12870:1997 - Ophthalmic optics - Spectacle frames - General requirements and test methods - Effective Date
- 06-Jun-2022
Overview
ISO 2585:1972 specifies the dimensional requirements for slotting cutters with plain bore and key drive - metric series. It covers slotting cutters intended to fit cutter arbors and defines the metric dimensions for bodies with straight-sided or helical teeth. The standard aligns the recommended range of outside diameters with ISO/R 523 and references bore and keyway interchangeability from ISO/R 240.
Key topics and requirements
- Scope: Metric-series slotting cutters designed for mounting on cutter arbors using a plain bore and key drive. Tooth form (straight or helical) is left to the manufacturer’s choice.
- Dimensional data: Dimensions are expressed in millimetres and follow the metric series conventions adopted from ISO/R 523 for outside diameters.
- Bore and keyway: Bore and keyway dimensions must conform to the metric series specified in ISO/R 240 to ensure interchangeability with standardized cutter arbors and mandrels.
- Thickness tolerance: The tolerance on cutter thickness (L) is not fixed in the standard; it is to be agreed between the supplier and purchaser depending on the tolerance required for the machined part.
- Interchangeability focus: Emphasis on compatibility between cutters and arbors to support modular tooling systems and predictable mounting geometry.
Practical applications
ISO 2585 is used where standardized dimensions and fit between slotting cutters and cutter arbors are essential. Typical users and applications include:
- Tool manufacturers producing metric slotting (slitting) cutters for general milling operations.
- Machine shops and metalworking factories that mount cutters on arbor systems for slotting, keyway cutting, and similar milling tasks.
- Tooling engineers and purchasing/specification teams ensuring interchangeability and consistent procurement across suppliers.
- Quality and inspection teams verifying dimensional conformity to international standards.
Benefits for users:
- Simplifies selection and replacement of cutters across different suppliers.
- Reduces fitment errors and scope for rework by aligning bore/keyway dimensions with ISO/R 240.
- Supports modular tooling systems and standard inventory practices.
Related standards
- ISO/R 523 - Recommended range of outside diameters for milling cutters (defines applicable diameters used by ISO 2585).
- ISO/R 240 - Interchangeability dimensions for milling cutters and cutter arbors (bore and keyway metric series).
Keywords: ISO 2585, slotting cutters, plain bore, key drive, metric series, milling cutters, cutter arbors, ISO/R 523, ISO/R 240, dimensions, tolerances, straight-sided teeth, helical teeth.
ISO 2585:1972 - Slotting cutters with plain bore and key drive -- Metric series
ISO 2585:1972 - Fraises 1 taille a rainurer, a alésage lisse, a entraînement par clavette -- Série métrique
ISO 2585:1972 - Fraises 1 taille a rainurer, a alésage lisse, a entraînement par clavette -- Série métrique
Frequently Asked Questions
ISO 2585:1972 is a standard published by the International Organization for Standardization (ISO). Its full title is "Slotting cutters with plain bore and key drive - Metric series". This standard covers: Specifies the dimensions of slotting cutters with straigth-sided teeth and with helical teeth. The range of outside diameters is taken from ISO 523.
Specifies the dimensions of slotting cutters with straigth-sided teeth and with helical teeth. The range of outside diameters is taken from ISO 523.
ISO 2585:1972 is classified under the following ICS (International Classification for Standards) categories: 25.100.20 - Milling tools. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 2585:1972 has the following relationships with other standards: It is inter standard links to ISO 12870:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 2585:1972 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
~~
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOAHAJl OPTAHM3ALViII l-IO CTAHJJAPTM3ALWW .ORGANISATION INTERNATIONALE DE NORMALISATION
Slotting cutters with plain bore and key drive -
Metric series
First edition - 1972- 12- 01
UDC 621.914.28 Ref. No. IS0 2585-1972 (E)
Descriptors : tools, cutting tools, milling cutters, dimensions.
Price based on 1 page
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee, International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2585 was drawn up by Technical Committee
ISO/TC 29, Small too/s.
It was approved in February 1972 by the Member Bodies of the following
countries :
Austria Switzerland
Italy
Thailand
Belgium Japan
Turkey
Egypt, Arab Rep. of Poland
France Romania United Kingdom
Hungary South Africa, Rep. of U.S.A.
India Spain U.S.S.R.
Israel Sweden
The Member Body of the following country expressed disapproval of the
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOflHAFI OPI-AHM3ALWiSl IlO CTAHflAPTM3A~MM *ORGANISATION INTERNATIONALE DE NORMALISATION
Fraises 1 taille à rainurer, à alésa:ge lisse,
à entraînement par clavette - Série métrique
Première édition - 1972- 12-01
Réf. No : ISO 2585-1972 (F)
CDU 621.914.28
Descripteurs : outil, outil de coupe, fraise mécanique, dimension.
Prix basé sur 1 page
AVANT-PROPOS
ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 2585 a été établie par le Comité Technique
ISO/TC 29, Petit outillage.
Elfe fut approuvée en février 1972 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ Inde Suède
Autriche Israël Suisse
Belgique Italie Tha’ilande
Egypte, Rép. arabe d’ Japon Turquie
Espagne Pologne U.R.S.S.
France Roumanie U.S.A.
Hongrie Royaume-Uni
Le Comité Membre du pays suivant a désapprouvé le document pour des raisons
techniques
Tchécoslovaquie
C3 Orga
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOflHAFI OPI-AHM3ALWiSl IlO CTAHflAPTM3A~MM *ORGANISATION INTERNATIONALE DE NORMALISATION
Fraises 1 taille à rainurer, à alésa:ge lisse,
à entraînement par clavette - Série métrique
Première édition - 1972- 12-01
Réf. No : ISO 2585-1972 (F)
CDU 621.914.28
Descripteurs : outil, outil de coupe, fraise mécanique, dimension.
Prix basé sur 1 page
AVANT-PROPOS
ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 2585 a été établie par le Comité Technique
ISO/TC 29, Petit outillage.
Elfe fut approuvée en février 1972 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ Inde Suède
Autriche Israël Suisse
Belgique Italie Tha’ilande
Egypte, Rép. arabe d’ Japon Turquie
Espagne Pologne U.R.S.S.
France Roumanie U.S.A.
Hongrie Royaume-Uni
Le Comité Membre du pays suivant a désapprouvé le document pour des raisons
techniques
Tchécoslovaquie
C3 Orga
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...