ISO 6624-1:2017

INTERNATIONAL ISO
STANDARD 6624-1
Third edition
2017-04
Internal combustion engines —
Piston rings —
Part 1:
Keystone rings made of cast iron
Moteurs à combustion interne — Segments de piston —
Partie 1: Segments trapézoïdaux en fonte
Reference number
ISO 6624-1:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 6624-1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6624-1:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 1
4 Overview . 1
5 Ring types and designation examples . 1
5.1 Type T — Straight faced keystone ring 6° . 1
5.1.1 General features. 1
5.1.2 Designation . 2
5.2 Type TB — Symmetrical barrel faced keystone ring 6° . 2
5.2.1 General features. 2
5.2.2 Designation . 4
5.3 Type TBA — Asymmetrical barrel faced keystone ring 6° . 4
5.3.1 General features. 4
5.3.2 Designation . 5
5.4 Type TM — Taper faced keystone ring 6° . 5
5.4.1 General features. 5
5.4.2 Designation . 6
5.5 Type K — Straight faced keystone ring 15° . 7
5.5.1 General features.
...