ISO 4118:1996/Cor 1:1999 - Non-certified lower-deck containers for air

Non-certified lower-deck containers for air transport - Specification and testing - Technical Corrigendum 1

Conteneurs non certifiés de pont inférieur d'aéronefs — Spécification et essais — Rectificatif technique 1

General Information

Status

Withdrawn

Publication Date

20-Oct-1999

Withdrawal Date

20-Oct-1999

ICS

55.180.30 - Air mode containers, pallets and nets

Technical Committee

ISO/TC 20/SC 9 - Air cargo and ground equipment

Drafting Committee

ISO/TC 20/SC 9 - Air cargo and ground equipment

Current Stage

9599 - Withdrawal of International Standard

Start Date

01-Nov-2005

Completion Date

13-Dec-2025

Ref Project

Relations

Corrects

ISO 4118:1996 - Non-certified lower-deck containers for air transport - Specification and testing

Effective Date

06-Jun-2022

Revised

ISO 4118:2005 - Air cargo - Non-certified containers for the lower deck of large-capacity aircraft - Specification and testing

Effective Date

15-Apr-2008

Child

ISO 4118:1996 - Non-certified lower-deck containers for air transport - Specification and testing

Effective Date

15-Apr-2008

Standard

ISO 4118:1996/Cor 1:1999

English language

1 pages

sale 15% off

Preview

sale 15% off

Preview

Standard

ISO 4118:1996/Cor 1:1999

French language

1 pages

sale 15% off

Preview

sale 15% off

Preview

Frequently Asked Questions

What is ISO 4118:1996/Cor 1:1999?

ISO 4118:1996/Cor 1:1999 is a standard published by the International Organization for Standardization (ISO). Its full title is "Non-certified lower-deck containers for air transport - Specification and testing - Technical Corrigendum 1". This standard covers: Non-certified lower-deck containers for air transport - Specification and testing - Technical Corrigendum 1

What is the scope of ISO 4118:1996/Cor 1:1999?

Non-certified lower-deck containers for air transport - Specification and testing - Technical Corrigendum 1

What ICS categories does ISO 4118:1996/Cor 1:1999 belong to?

ISO 4118:1996/Cor 1:1999 is classified under the following ICS (International Classification for Standards) categories: 55.180.30 - Air mode containers, pallets and nets. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to ISO 4118:1996/Cor 1:1999?

ISO 4118:1996/Cor 1:1999 has the following relationships with other standards: It is inter standard links to ISO 4118:1996, ISO 4118:2005; is excused to ISO 4118:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I purchase ISO 4118:1996/Cor 1:1999?

You can purchase ISO 4118:1996/Cor 1:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)

INTERNATIONAL STANDARD ISO 4118:1996
TECHNICAL CORRIGENDUM 1
Published 1999-10-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION � МЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИ � ORGANISATION INTERNATIONALE DE NORMALISATION
Non-certified lower-deck containers for air transport —
Specification and testing
TECHNICAL CORRIGENDUM 1
Conteneurs non certifiés de pont inférieur d'aéronefs — Spécification et essais
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to International Standard ISO 4118:1996 was prepared by Techni
...

NORME INTERNATIONALE ISO 4118:1996
RECTIFICATIF TECHNIQUE 1
Publié 1999-10-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION � МЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИ � ORGANISATION INTERNATIONALE DE NORMALISATION
Conteneurs non certifiés de pont inférieur d'aéronefs —
Spécification et essais
RECTIFICATIF TECHNIQUE 1
Non-certified lower-deck containers for air transport — Specification and testing
TECHNICAL CORRIGENDUM 1
Le Rectificatif technique 1 à la Norme internationale ISO 4118:1996 a été élaboré par l
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO

ISO 19281:2025(Main)

Air cargo - Fire-resistant containers - Design, performance and testing requirements

This document specifies the minimum design and performance criteria and testing methods of passive fire-resistant containers (FRCs) used in cargo compartments of civil transport aircraft to improve fire protection. This document does not cover requirements for fire detection or suppression devices. The specified fire-resistant containers (FRCs) are passive devices capable of containing a fire for a specific duration.

Standard
13 pages
English language
sale 15% off

ISO

ISO 20291-1:2021(Main)

Air cargo - Restraint slings - Part 1: Design and testing

This document specifies the design criteria and testing methods adequate to guarantee the ultimate strength and operational dependability of cargo restraint sling assemblies made of steel wire rope, with a 22,25 kN (5 000 lbf) rated ultimate load capability, as can be used by the airline industry in order to restrain on board civil transport aircraft during flight, including the following: - cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems and meeting the requirements of ISO 8097 (NAS 3610) or ISO 21100, or - non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained ("floating") pallet into either lower deck, main deck or upper deck containerized cargo compartments of an aircraft, to be restrained onto aircraft structure attachment (tie-down) points. Two types of wire rope restraint slings are defined: a) type A: adjustable length restraint sling assemblies, including a tension retaining device and termination fittings attached to the wire rope end eyes; b) type B: fixed length restraint sling extensions, to be used in conjunction with a type A cable; extensions are usually terminated at both ends by eyes, without additional fittings, and can be attached through hooks or shackles. The cables specified in this document are intended exclusively for restraint purposes on board aircraft, and not for use as lifting slings.

Standard
20 pages
English language
sale 15% off

ISO

ISO 20291-2:2021(Main)

Air cargo - Restraint slings - Part 2: Utilization requirements and recommendations and lashing calculations

1.1 This document provides general utilization requirements and recommendations and calculation methods adequate to guarantee the effectiveness and ultimate strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight, including the following: a) cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck or main deck or upper deck cargo systems meeting the restraint requirements of air cargo pallets approved in accordance with ISO8097 (NAS 3610) or ISO 21100, or b) additional tie-down on aircraft structure when necessitated by pallet maximum gross mass or centre of gravity limits, or c) non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained pallet (floating pallet) into either lower deck, main deck or upper deck containerized cargo compartments of an aircraft, when using for this purpose restraint slings (wire rope cables) specified in ISO 20291-1. 1.2 Restraint slings as specified in this document can also be used for permanent or semi-permanent attachment of a special purpose device, such as aircraft engine transport stand (see ISO 11241), horse stall (see ISO 9469), automobile transport device (see ISO 8268) or other, whether or not airworthiness approved, onto an aircraft pallet. 1.3 This document applies to cargo tie-down/lashing arrangements using exclusively air cargo restraint slings conforming to ISO 20291-1. NOTE Where tie-down is performed onto aircraft structure as per 1.1 b) or c), additional restrictions can be stated in the aircraft's authority approved Weight and Balance Manual. 1.4 This document specifies industry recognized means of complying with airworthiness authorities general regulations applicable to load securing on board civil transport aircraft (see 14 CFR Part 25 and EASA CS-25, CCAR-25 or Japanese Airworthiness Standard Part 3), and aircraft manufacturers authority approved Weight and Balance Manuals for each aircraft type as specified therein. 1.5 The wire rope slings in this document are intended exclusively for restraint purposes on board aircraft and are not intended to be used as lifting slings for handling or any other purpose.

Standard
10 pages
English language
sale 15% off

ISO

ISO 21894:2020(Main)

Air cargo - Cargo stopper devices - Design and testing

This document specifies the design, performance and testing requirements for "Cargo Stopper" air cargo restraint accessories with a 22 250 N (5 000 lbf) rated load capacity, to be used in conjunction with air cargo restraint straps meeting ISO 16049-1 (TSO/ETSO ̶ C172), or air cargo restraint slings meeting ISO 20291-1, with the same rated load. Cargo stopper devices designed to this document are intended to be used in either of the following typical instances: a) to ensure restraint/tie-down of a piece of cargo that does not lend itself to either direct hooking of tie-down straps or passing a strap around without risk of slippage; a common example is long shaped cargo items with a narrow cross-section, whether or not overhanging from the pallet, individual or in bundles, e.g. pipes or beams; see ISO 16049-2:2020, 7.4; b) to restrain cargo smaller than the pallet net's mesh, or identified as "piercing" cargo, presenting a hazard to the aircraft in the event of it being released during flight; c) when a crate containing cargo, even though its cross-section is large enough to be directly tied-down with the pallet net or restraint straps, contains or can contain a heavy item, e.g. a piece of machinery, shaft, or similar, with a cross-section lower than the pallet net's mesh size; NOTE Such "hidden" items have been known to break free from insufficiently strong crates when subjected to in-flight accelerations, then pass due to their small size through the net mesh restraining the crate and be released into the cargo compartment. d) to assist in tying-down odd-shaped cargo pieces where it is difficult or not allowed to directly attach tie-down straps or pass them around the load in an effective manner.

Standard
8 pages
English language
sale 15% off

ISO

ISO 4118:2016(Main)

Air cargo - Non-certified lower deck containers - Design and testing

ISO 4118:2016 covers the design, performance and testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness approval/certification when loaded under the conditions of compartment restraint and/or where applicable according to the aircraft type's approved Weight and Balance Manual, ISO 8097 or ISO 21100 equivalent base plate restraint for these containers. Aircraft Weight and Balance Manuals require non-certified containers be constructed then loaded in such a manner that neither the container nor its contents can become a hazard or damage the aircraft structure under flight conditions. Compliance with ISO 4118:2016 is one means of demonstrating compliance with these requirements. Most sizes of containers covered by ISO 4118:2016 (base sizes K, L, P and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which in general do not accept non-certified units. Accordingly, all containers covered by ISO 4118:2016 are intended to be used/installed exclusively in aircraft lower deck compartments NOTE The metric equivalents for dimensions have been rounded up or down to the nearest millimetre, except in critical dimensions. Masses have been rounded up to the nearest kilogram and forces have been rounded up to the nearest 10 N. See introduction where it is deemed necessary to use exact values.

Standard
37 pages
English language
sale 15% off
Standard
37 pages
English language
sale 15% off

ISO

ISO 19281:2016(Main)

Air cargo - Fire resistant containers - Design, performance and testing requirements

ISO 19281:2016 the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) for carriage on aircraft main deck, to be used on either of the following: a) in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations; b) on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not currently mandate their use. The fire resistant containers (FRCs) specified by this International Standard are intended to be used to contain and restrain unitized cargo for loading into either of the following aircraft main deck cargo compartments: a) Class B aircraft cargo compartments according to CS-25, CCAR-25, JAS Part 3 or 14CFR Part 25 25.857 (b), in accordance a) or b) above; b) Class E aircraft cargo compartments according to CS-25, CCAR-25, JAS Part 3 or 14CFR Part 25 25.857 (e), in accordance with b) above; c) Class F aircraft cargo compartments according to CS-25 § 25.857(f) and AMC to CS-25.855 and 25.857, or 14CFR Part 25 § 25.857(f) and FAA Advisory Circular AC25.857-X, in accordance with a) above. NOTE 1 Though nothing formally prevents a fire resistant container (FRC) from being carried in a lower deck Class C aircraft cargo compartment, it is not intended for this use since its fire containment capability would be redundant with that of the aircraft's fire detection and suppression system, which it could hamper. Consult current regulatory guidance materials and aircraft type's Weight and Balance Manual whenever available. Containers are specified in this International Standard only insofar as their flammability requirements and fire resistance performance are concerned. They are not otherwise specified in this International Standard, but still require meeting the applicable general standards. NOTE 2 See Clause 2 and 4.1 and 4.2 for applicable containers airworthiness approval and general design standards. This International Standard does not cover requirements for fire detection or suppression devices. The specified fire resistant containers (FRCs) are passive devices capable of containing a fire for the specified duration by themselves. NOTE 3 Nothing, however, prevents additional use of self-contained fire detection or suppression devices within fire resistant containers (FRCs), but such devices are not specified herein (see 4.5.5). ISO 19281:2016 does not cover requirements for other types of fire resistant containers not specified therein. The use of fire resistant containers meeting the requirements of this International Standard is not alone sufficient to ensure flight safety: this International Standard is based on the assumption that the approved fire resistant containers will be built up, installed, and checked prior to aircraft loading in accordance with appropriate operating instructions, by competent, suitably trained, personnel as defined for example in ISO 9001:2008, 6.2.2 (see 9.3).

Standard
20 pages
English language
sale 15% off
Standard
20 pages
English language
sale 15% off

ISO

ISO 10327:2014(Main)

Air cargo - Main deck containers - Design and testing

ISO 10327:2014 covers the minimum design and operational testing requirements for general purpose, base-restrained containers exclusively intended for the main or upper deck cargo compartments of main line civil transport aircraft, capable of being used by either airlines or shippers and requiring an airworthiness authority approval (certification). ISO 10327:2014 does not cover the performance requirements and ultimate load testing parameters for airworthiness authorities approval (certification), which are covered in ISO 21100 or, for units approved prior to 2012, ISO 8097:2001. The design and operational testing requirements of ISO 10327:2014 are additional to the performance and certification testing requirements of these International Standards. ISO 10327:2014 does not cover containers with an overall height of 1 625 mm (64 in) or less, that can be loaded on the lower deck compartments of main line civil transport aircraft, which are specified in ISO 6517, nor air-surface main deck containers, which are specified in ISO 4128 and ISO 8323.

Standard
24 pages
English language
sale 15% off

ISO

ISO 6517:2013(Main)

Air cargo - Certified lower deck containers - Design and testing

ISO 6517:2013 covers the minimum design and operational testing requirements for general purpose base-restrained containers exclusively intended for the lower deck compartments of main line civil transport aircraft, capable of being used by either airlines or shippers and requiring airworthiness authority approval (certification). ISO 6517:2013 does not cover the performance requirements and ultimate load testing parameters for approval by airworthiness authorities (certification), which are covered in ISO 21100 or, for units approved prior to 2012, ISO 8097:2001. The design and operational testing requirements of ISO 6517:2013 are additional to those of these standards.

Standard
21 pages
English language
sale 15% off

ISO

ISO 16412:2005(Main)

Air cargo equipment - Air cargo pallets - Utilization guidelines

ISO 16412:2005 specifies utilization guidelines to be applied when preparing air cargo pallets for carriage on board civil transport aircraft. It identifies the various concerns to be taken into consideration to ensure flight safety, and provides recognized industry standard methods to achieve it. 16412:2005 is applicable to any certified air cargo pallet built up from either a single or a number of pieces of commercial cargo, intended to be loaded on lower, main or upper deck of a civil transport aircraft, whether a freighter or a passenger-carrying aircraft. Its field of application includes all pallets prepared within ground premises, whether at a shipper's facilities or an airport cargo warehouse, including those intended to be loaded into the aircraft in a floating position. The provisions of ISO 16412:2005 may not entirely apply in the event of pre-embarked pallets. In such a case, it is up to the operator to identify and implement the applicable criteria. 16412:2005 is not intended to apply to air cargo pallets prepared for military transport aircraft, and does not take into account any specific criteria for military aircraft. Nothing, however, precludes it being used for guidelines in this case, it being the military operator's responsibility to identify and implement any additional applicable criteria.

Standard
23 pages
English language
sale 15% off
Standard
25 pages
French language
sale 15% off

ISO

ISO 8097:2001(Main)

Aircraft - Minimum airworthiness requirements and test conditions for certified air cargo unit load devices

This International Standard specifies the minimum requirements and test conditions for certified cargo unit load devices to be installed in certified aircraft. It covers pallets, nets and containers intended for use with the following classes of aircraft loading and restraint systems: _ Class I: Unit load device restraint in conformity with all flight and ground load conditions, including 9g forward emergency loading conditions. _ Class II: All other unit load device restraints.

Standard
3 pages
English language
sale 15% off
Standard
3 pages
French language
sale 15% off