Railway applications - Fixed installations - DC switchgear - Part 1: General

IEC 61992 series specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c., which supply electrical power to vehicles for public guided transport, i.e. railway vehicles, tramway vehicles, underground vehicles and trolley-buses. Part 1 specifies general requirements.

Applications ferroviaires - Installations fixes - Appareillage à courant continu - Partie 1: Généralités

La série CEI 61992 spécifie les exigences relatives aux appareillages et aux appareils de commande à courant continu et est conçue pour être utilisée dans des installations électriques fixes dont la tension nominale ne dépasse pas 3 000 V en courant continu, qui alimentent en courant électrique les véhicules destinés au transport public guidé, comme les véhicules ferroviaires, les véhicules de tramways, les véhicules de métro et les trolleybus. La partie 1 spécifie les exigences générales.

General Information

Status
Published
Publication Date
06-Feb-2006
Current Stage
PPUB - Publication issued
Start Date
31-Mar-2006
Completion Date
07-Feb-2006
Ref Project

Relations

Buy Standard

Standard
IEC 61992-1:2006 - Railway applications - Fixed installations - DC switchgear - Part 1: General
English and French language
99 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61992-1:2006+AMD1:2014 CSV - Railway applications - Fixed installations - DC switchgear - Part 1:General Released:4/29/2014 Isbn:9782832215524
English and French language
199 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NORME CEI
INTERNATIONALE
IEC
61992-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-02
Applications ferroviaires –
Installations fixes –
Appareillage à courant continu –
Partie 1:
Généralités
Railway applications –
Fixed installations –
DC switchgear –
Part 1:
General
Numéro de référence
Reference number
CEI/IEC 61992-1:2006
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(www.iec.ch/searchpub) vous permet de faire des (www.iec.ch/searchpub) enables you to search by a
recherches en utilisant de nombreux critères, variety of criteria including text searches,
comprenant des recherches textuelles, par comité technical committees and date of publication. On-
d’études ou date de publication. Des informations en line information is also available on recently
ligne sont également disponibles sur les nouvelles issued publications, withdrawn and replaced
publications, les publications remplacées ou retirées, publications, as well as corrigenda.
ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(www.iec.ch/online_news/justpub) est aussi dispo- (www.iec.ch/online_news/justpub) is also available
nible par courrier électronique. Veuillez prendre by email. Please contact the Customer Service
contact avec le Service client (voir ci-dessous) Centre (see below) for further information.
pour plus d’informations.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: custserv@iec.ch Email: custserv@iec.ch
Tél: +41 22 919 02 11 Tel: +41 22 919 02 11
Fax: +41 22 919 03 00 Fax: +41 22 919 03 00
.
NORME CEI
INTERNATIONALE
IEC
61992-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-02
Applications ferroviaires –
Installations fixes –
Appareillage à courant continu –
Partie 1:
Généralités
Railway applications –
Fixed installations –
DC switchgear –
Part 1:
General
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
X
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 61992-1  CEI:2006
SOMMAIRE
AVANT-PROPOS .6

1 Domaine d'application.10
2 Références normatives .10
3 Termes et définitions.12
3.1 Termes généraux .12
3.2 Caractéristiques nominales.18
3.3 Composants .30
3.4 Termes liés aux disjoncteurs, aux interrupteurs-sectionneurs et aux relais
associés à courant continu.38
4 Exigences et conditions de fonctionnement en service .48
4.1 Conditions d’environnement.48
4.2 Niveaux d’isolement.48
5 Caractéristiques normalisées et hypothèses conventionnelles .52
5.1 Caractéristiques normalisées et paramètres conventionnels relatifs au circuit
principal .52
5.2 Caractéristiques normalisées des circuits auxiliaires et de commande.56
6 Limites d'échauffement .56
7 Essais .58
7.1 Généralités.58
7.2 Tolérances d’essai.60
7.3 Essais concernant les dispositifs mobiles.60
7.4 Essai d'échauffement .64
7.5 Essais diélectriques.68
7.6 Conditions de court-circuit et de connexion en charge.70
7.7 Vérification du comportement au courant de courte durée admissible.72
7.8 Vérification de l'effort à appliquer au dispositif de commande manuel, et de la
fiabilité de l’indicateur de position .74

Annexe A (normative) Schémas d’essais .76
Annexe B (normative) Conditions environnementales pour les installations en intérieur.80
Annexe C (normative) Recherche de courants critiques pour les disjoncteurs et les
interrupteurs à courant continu .86
Annexe D (informative) lignes de fuite recommandées.90
Annexe E (informative) Détermination de la localisation du défaut d’énergie maximale.92

Bibliographie .98

Figure A.1 –Schéma du circuit d'essai pour vérifier les pouvoirs de fermeture et de
coupure dans des conditions de court-circuit et de connexion en charge/surcharge.76
Figure A.2 – Etalonnages types et interruption dans des conditions de court-circuit et de
charge/surcharge (deux cas différents d'étalonnage sont représentés) (voir 7.6).78
Figure E.1 – Circuit équivalent d'un système de traction à courant continu .96
Figure E.2 – Rapport de I /I sur T /T .96
maxE ss s c
61992-1  IEC:2006 – 3 –
CONTENTS
FOREWORD.7

1 Scope.11
2 Normative references.11
3 Terms and definitions .13
3.1 General terms.13
3.2 Performance characteristics .19
3.3 Components .31
3.4 Terms relating to d.c. circuit-breakers, switch-disconnectors and associated
relays .39
4 Service conditions and requirements.49
4.1 Environmental conditions .49
4.2 Insulation levels.49
5 Standard features and conventional assumptions .53
5.1 Standard features and conventional parameters for the main circuit .53
5.2 Standard features for auxiliary and control circuits .57
6 Temperature-rise limits .57
7 Tests .59
7.1 General .59
7.2 Test tolerances.61
7.3 Tests on movable devices.61
7.4 Temperature-rise test .65
7.5 Dielectric tests.69
7.6 Short-circuit and load-switching conditions.71
7.7 Verification of the behaviour during short-time withstand current test.73
7.8 Verification of the manual control device for sturdiness and position indicator
reliability.75

Annex A (normative) Diagrams for tests .77
Annex B (normative)  Environmental conditions for indoor installations .81
Annex C (normative) Search of critical currents for d.c. circuit-breakers and switches.87
Annex D (informative) Recommended creepage distances.91
Annex E (informative) Determination of maximum energy fault location.93

Bibliography .99

Figure A.1 – Diagram of the test circuit for checking the making and breaking capacities
in short-circuit and load/overload switching conditions .77
Figure A.2 – Typical calibrations and interruption under short-circuit and load/overload
switching conditions (two different cases of calibration are represented) (see 7.6) .79
Figure E.1 – Equivalent circuit of a d.c. traction system .97
Figure E.2 – Ratio of I /I to T /T .97
maxE ss s c
– 4 – 61992-1  CEI:2006
Tableau 1 – Niv
...


IEC 61992-1 ®
Edition 2.1 2014-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Railway applications – Fixed installations – DC switchgear –
Part 1: General
Applications ferroviaires – Installations fixes – Appareillage à courant continu –
Partie 1: Généralités
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 55 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61992-1 ®
Edition 2.1 2014-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Railway applications – Fixed installations – DC switchgear –

Part 1: General
Applications ferroviaires – Installations fixes – Appareillage à courant continu –

Partie 1: Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 45.060 ISBN 978-2-8322-1552-4

IEC 61992-1 ®
Edition 2.1 2014-04
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Railway applications – Fixed installations – DC switchgear –
Part 1: General
Applications ferroviaires – Installations fixes – Appareillage à courant continu –
Partie 1: Généralités
– 2 – IEC 61992-1:2006
+AMD 1:2014 CSV  IEC 2014
CONTENTS
FOREWORD . 4

1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 7
3.1 General terms. 7
3.2 Performance characteristics . 10
3.3 Components . 15
3.4 Terms relating to d.c. circuit-breakers, switch-disconnectors and associated
relays . 20
4 Service conditions and requirements . 24
4.1 Environmental conditions . 24
4.2 Insulation levels . 24
5 Standard features and conventional assumptions . 26
5.1 Standard features and conventional parameters for the main circuit . 26
5.2 Standard features for auxiliary and control circuits . 27
6 Temperature-rise limits . 28
7 Tests . 29
7.1 General . 29
7.2 Test tolerances . 30
7.3 Tests on movable devices . 30
7.4 Temperature-rise test . 32
7.5 Dielectric tests . 33
7.6 Short-circuit and load-switching conditions . 34
7.7 Verification of the behaviour during short-time withstand current test . 36
7.8 Verification of the manual control device for sturdiness and position indicator
reliability . 36

Annex A (normative) Diagrams for tests . 38
Annex B (normative)  Environmental conditions for indoor installations . 40
Annex C (normative) Search of critical currents for d.c. circuit-breakers and switches . 43
Annex D (informative) Recommended creepage distances . 45
Annex E (informative) Determination of maximum energy fault location . 46

Bibliography . 49

Figure A.1 – Diagram of the test circuit for checking the making and breaking capacities

in short-circuit and load/overload switching conditions . 38
Figure A.2 – Typical calibrations and interruption under short-circuit and load/overload
switching conditions (two different cases of calibration are represented) (see 7.6) . 39
Figure E.1 – Equivalent circuit of a d.c. traction system . 48
Figure E.2 – Ratio of I /I to T /T . 48
maxE ss s c
+AMD 1:2014 CSV  IEC 2014
Table 1 – Insulation levels . 25
Table 2 – Test circuit parameters for maximum circuit energy . 26
Table 3 – Preferred voltages for auxiliary and control circuits [V] . 27
Table 4 – Temperature-rise limits for insulated coils . 28
Table 5 – Temperature-rise limits for various components . 29
Table 6 – Test tolerances . 30
Table 7 – Recommended quantities and dimensions of copper bars . 33
Table 8 – Values of forces or torques for the tests . 37
Table B.1 – Limits of sinusoidal vibrations . 41
Table D.1 – Material group identification . 45
Table D.2 – Recommended creepage distances, in mm/kV (base U ) . 45
Nm
– 4 – IEC 61992-1:2006
+AMD 1:2014 CSV  IEC 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
FIXED INSTALLATIONS –
DC SWITCHGEAR –
Part 1: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Public
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.