IEC 62807-3:2023

IEC 62807-3 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
Hybrid communication cables –
Part 3: Outdoor hybrid cables – Sectional specification
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62807-3 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
Hybrid communication cables –
Part 3: Outdoor hybrid cables – Sectional specification

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.20 ISBN 978-2-8322-6397-6

– 2 – IEC 62807-3:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviated terms . 7
4 Design and construction . 8
5 Rated values and characteristics . 8
6 Performance requirements and test methods . 8
6.1 General . 8
6.2 Optical requirements for cabled optical fibre . 8
6.3 Electrical and transmission requirements for cabled electrical element . 9
6.3.1 Coaxial element . 9
6.3.2 Pair/quad element . 10
6.3.3 Current carrying element . 10
6.3.4 Crosstalk between elements . 11
6.4 Mechanical requirements of hybrid cable . 11
6.4.1 Tensile . 11
6.4.2 Crush . 11
6.4.3 Impact . 12
6.4.4 Repeated bending . 12
6.4.5 Cold bend . 12
6.4.6 Torsion . 12
6.4.7 Bend . 13
6.4.8 Abrasion resistance of cable sheaths . 13
6.4.9 Abrasion resistance of cable markings . 13
6.4.10 Tensile strength, and elongation at break of sheath . 13
6.4.11 Other mechanical requirements . 13
6.5 Environmental requirements of hybrid cable . 13
6.5.1 Temperature cycling . 13
6.5.2 Water penetration . 14
6.5.3 Compound flow . 14
6.5.4 UV resistance test . 14
7 Packaging . 14
8 Quality assurance . 14

Table 1 – Requirements of optical element . 9
Table 2 – Requirements of coaxial element . 9
Table 3 – Requirements of pair/quad element . 10
Table 4 – Requirements of current carrying element . 11

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HYBRID COMMUNICATION CABLES –
Part 3: Outdoor hybrid cables – Sectional specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 62807-3 has been prepared by subcommittee 46C: Wires and symmetric cables, of IEC
technical committee 46: Cables, wires, waveguides, RF connectors, RF and microwave
passive components and accessories. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
46C/1243/FDIS 46C/1250/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.

– 4 – IEC 62807-3:2023 © IEC 2023
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 62807 series, published under the general title Hybrid
telecommunication cables, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
HYBRID COMMUNICATION CABLES –
Part 3: Outdoor hybrid cables – Sectional specification

1 Scope
This part of IEC 62807 is a sectional specification for outdoor hybrid communication cables
intended to be used externally in various applications. It specifies terms, definitions, symbols
and abbreviated terms, the design and construction, rated values and characteristics,
performance requirements and test methods, packaging and quality assurance.
Hybrid cables are designed for networks and customer premises cabling that transmit data,
telecommunication, instrumentation, control and signalling services over optical fibres and/or
broadband data over coaxial element, wire/pair/quad element and can have the option of
supplying electrical current to a remote equipment.
In the IEC 62807 series, the current carrying elements are used only to supply power to the
equipment within the communication network. They are not used for electricity distribution or
transmission, nor for power supply to domestic appliances. The specific uses are defined in
the relevant specification.
The relationship between each of the MICE classifications in ISO/IEC 11801-1, performance
requirements and test methods of hybrid cables being proposed in a specific application are
fully considered and aligned.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60050-461, International Electrotechnical Vocabulary (IEV) – Part 461: Electric cables
IEC 60050-731, International Electrotechnical Vocabulary (IEV) – Part 731: Optical fibre
communication
IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including
450/750 V
IEC 60227-1, Polyvinyl chloride insulated cables of rated voltages up to and including
450/750 V – Part 1: General requirements
IEC 60228, Conductors of insulated cables
IEC 60502-1, Power cables with extruded insulation and their accessories for rated voltages
from 1 kV (Um =
...