ETSI EN 303 413 V1.2.1 (2021-04)

ETSI EN 303 413 V1.2.1 (2021-04)






HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Global Navigation Satellite System (GNSS) receivers;
Radio equipment operating in the 1 164 MHz to 1 300 MHz
and 1 559 MHz to 1 610 MHz frequency bands;
Harmonised Standard for access to radio spectrum

---------------------- Page: 1 ----------------------
2 ETSI EN 303 413 V1.2.1 (2021-04)

Reference
REN/SES-00445
Keywords
GNSS, harmonised standard, navigation, receiver,
satellite

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 303 413 V1.2.1 (2021-04)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Executive summary . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance specifications . 11
4.2.1 Receiver blocking . 11
4.2.1.1 Definition . 11
4.2.1.2 Specification. 11
4.2.1.3 Conformance . 12
4.2.2 Receiver spurious emissions . 12
4.2.2.1 Definition . 12
4.2.2.2 Specification. 12
4.2.2.3 Conformance . 13
5 Testing for conformance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Void . 13
5.3 Test methodology for receiver blocking . 13
5.3.1 General . 13
5.3.2 Test setup for conducted measurements . 13
5.3.2.1 Test equipment . 13
5.3.2.2 EUT configuration . 14
5.3.3 Test setup for radiated measurements . 14
5.3.3.1 General . 14
5.3.3.2 Test equipment . 14
5.3.3.3 EUT configuration . 14
5.4 Receiver blocking test . 15
5.4.1 General . 15
5.4.2 Test conditions . 15
5.4.3 Test method for GUE utilizing the 1 559 MHz to 1 610 MHz RNSS band . 15
5.4.4 Test method for GUE utilizing the 1 164 MHz to 1 300 MHz RNSS band . 16
5.5 Receiver spurious emissions test . 16
5.5.1 General . 16
5.5.2 Test conditions . 16
5.5.3 Test method . 17
5.5.3.1 Conducted measurement . 17
5.5.3.1.1 Introduction . 17
5.5.3.1.2 Pre-scan . 17
5.5.3.1.3 Measurement of the emissions identified during the pre-scan . 18
5.5.3.2 Radiated measurement . 18
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 303 413 V1.2.1 (2021-04)
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 19
Annex B (normative): Details of parameters used in technical requirements specifications
(clause 4) . 20
B.1 Blocking signal . 20
B.1.1 Definition . 20
B.1.2 Measurement technique for validation of the blocking signal settings . 21
B.2 GNSS signals . 21
B.2.1 Definition . 21
B.2.2 GNSS signal details . 21
B.2.3 GNSS satellite details . 22
Annex C (informative): C/N degradation metric. 23
0
C.1 General . 23
C.2 Definition . 23
C.3 Example calculation of nominal 1 dB degradation of C/N . 23
0
Annex D (informative): Test Report Application Form for ETSI EN 303 413 . 25
D.1 The right to copy . 25
D.2 General . 25
D.3 Information as required by clause 5.4.3 and clause 5.4.4 . 25
D.4 Information as required by clause 5.5 . 27
Annex E (informative): GNSS Interface Specifications . 29
Annex F (informative): Background to Conformance specifications . 30
F.1 Introduction . 30
F.2 Metric used for measurements in GNSS receivers . 30
F.3 Receiver sensitivity . 30
F.3.1 Definition . 30
F.3.2 Justification for non-inclusion . 30
F.4 Receiver co-channel rejection . 31
F.4.1 Definition . 31
F.4.2 Justification for non-inclusion . 31
F.5 Receiver Selectivity . 31
F.5.1 Definition . 31
F.5.2 Justification for non-inclusion . 31
F.6 Other receiver effects . 32
F.6.1 Receiver dynamic range . 32
F.6.1.1 Definition . 32
F.6.1.2 Justification for non-inclusion . 32
F.6.2 Reciprocal mixing . 32
F.6.2.1 Definition . 32
F.6.2.2 Justification for non-inclusion . 32
Annex G (informative): Change history . 33
History . 34


ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 303 413 V1.2.1 (2021-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations
and Systems (SES).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.8] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.

National transposition dates
Date of adoption of this EN: 12 April 2021
Date of latest announcement of this EN (doa): 31 July 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2022
Date of withdrawal of any conflicting National Standard (dow): 31 January 2023

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 303 413 V1.2.1 (2021-04)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Executive summary
The present document gives the technical requirements (clause 4) and test methodology (clause 5) for presumption of
conformity of GNSS User Equipment with article 3.2 of Directive 2014/53/EU [i.1].
Introduction
The present document defines technical requirements to support the essential requirements of article 3.2 of Directive
2014/53/EU [i.1] which states "Radio equipment shall be so constructed that it both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference".
The present document does not contain any requirement, recommendation or information about the installation of the
GNSS user equipment.

ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 303 413 V1.2.1 (2021-04)
1 Scope
The present document specifies technical characteristics and methods of measurements for Global Navigation Satellite
System (GNSS) User Equipment (GUE).
Global Navigation Satellite System (GNSS) User Equipment (GUE) is capable of operating as part of one or more
RadioNavigation-Satellite Service (RNSS) systems in the RNSS frequency bands given in table 1-1.
Table 1-1: RadioNavigation-Satellite Service (RNSS) frequency bands
RNSS frequency bands Comments
1 164 MHz to 1 300 MHz space-to-Earth
1 559 MHz to 1 610 MHz space-to-Earth

A GUE receives radio signals from one or more GNSS constellation for the purpose of radiodetermination of the
position, velocity and/or other characteristics of an object or the obtaining of information relating to those parameters,
by means of the propagation properties of radio waves. RNSS is defined as "A radiodetermination-satellite service used
for the purpose of radionavigation" (No. 1.43 of the ITU Radio Regulations [i.13]).
The present document applies to all GUE operating in the bands given in table 1-1 with the ability to receive any GNSS
constellation (e.g. BeiDou (BDS), Galileo, Global Navigation Satellite System (GLONASS), Global Positioning System
(GPS), Space Based Augmentation System (SBAS)).
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 328 (V2.2.2): "Wideband transmission systems; Data transmission equipment
operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 303 413 V1.2.1 (2021-04)
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EG 203 336 (V1.2.1): "Guide for the selection of technical parameters for the production of
Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.3] Recommendation ITU-R M.1787: "Description of systems and networks in the radionavigation-
satellite service (space-to-Earth and space-to-space) and technical characteristics of transmitting
space stations operating in the bands 1 164-1 215 MHz, 1 215-1 300 MHz and 1 559-1 610 MHz".
[i.4] Recommendation ITU-R M.1901: "Guidance on ITU-R Recommendations related to systems and
networks in the radionavigation-satellite service operating in the frequency bands
1 164-1 215 MHz, 1 215-1 300 MHz, 1 559-1 610 MHz, 5 000-5 010 MHz and
5 010-5 030 MHz".
[i.5] Recommendation ITU-R M.1902: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 215-1 300 MHz".
[i.6] Recommendation ITU-R M.1903: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) and receivers in the aeronautical
radionavigation service operating in the band 1 559-1 610 MHz".
[i.7] Recommendation ITU-R M.1905: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 164-1 215 MHz".
[i.8] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
[i.9] CISPR 16-1-4:2019: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements".
[i.10] ETSI TR 102 273 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Improvement on Radiated Methods of Measurement (using test site) and evaluation of the
corresponding measurement uncertainties".
[i.11] Void.
[i.12] Void.
[i.13] ITU Radio Regulations (edition of 2016).
[i.14] EN IEC 55016-1-1: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus"
(produced by CENELEC).
[i.15] EN 55016-2-3: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 2-3: Methods of measurements of disturbances and immunity - Radiated
disturbance measurements" (produced by CENELEC).
[i.16] EN 55032: "Electromagnetic compatibility of multimedia equipment - Emission requirements"
(produced by CENELEC).
ETSI

---------------------- Page: 8 ----------------------
9 ETSI EN 303 413 V1.2.1 (2021-04)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
C/N : carrier to noise-density ratio, expressed in dB-Hz
0
NOTE: The ratio of the received (GNSS) signal carrier power C, in dBW or dBm, to the noise power spectral
density, in dBW/Hz or dBm/Hz, in the absence of interference.
C/(N +I): carrier to noise-and-interference-density ratio, C/(N +I), in dB-Hz
0 0
conducted measurements: measurements of the performance of the EUT made by direct wired connection to the
antenna port
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
GNSS User Equipment (GUE): radiodetermination equipment capable of receiving signals from one or more GNSS
constellation
NOTE: Such a receiver can acquire and then track GNSS signals to determine its location and/or velocity and/or
time and/or other related parameters.
radiated measurements: measurements of the performance of the EUT made by placing the EUT in a suitable shielded
container and radiating the required signals to the EUT
NOTE: I.e. without using a direct wired connection to the antenna port.
RadioNavigation-Satellite Service (RNSS): services used for the purpose of radionavigation, that is for the
determination of the position, velocity, and/or other characteristics of an object
NOTE: Includes the use of GNSS and other R
...

Final draft ETSI EN 303 413 V1.2.1 (2021-02)






HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Global Navigation Satellite System (GNSS) receivers;
Radio equipment operating in the 1 164 MHz to 1 300 MHz
and 1 559 MHz to 1 610 MHz frequency bands;
Harmonised Standard for access to radio spectrum

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 303 413 V1.2.1 (2021-02)



Reference
REN/SES-00445
Keywords
GNSS, harmonised standard, navigation,
receiver, satellite

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Executive summary . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance specifications . 11
4.2.1 Receiver blocking . 11
4.2.1.1 Definition . 11
4.2.1.2 Specification. 11
4.2.1.3 Conformance . 12
4.2.2 Receiver spurious emissions . 12
4.2.2.1 Definition . 12
4.2.2.2 Specification. 12
4.2.2.3 Conformance . 13
5 Testing for conformance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Void . 13
5.3 Test methodology for receiver blocking . 13
5.3.1 General . 13
5.3.2 Test setup for conducted measurements . 13
5.3.2.1 Test equipment . 13
5.3.2.2 EUT configuration . 14
5.3.3 Test setup for radiated measurements . 14
5.3.3.1 General . 14
5.3.3.2 Test equipment . 14
5.3.3.3 EUT configuration . 14
5.4 Receiver blocking test . 15
5.4.1 General . 15
5.4.2 Test conditions . 15
5.4.3 Test method for GUE utilizing the 1 559 MHz to 1 610 MHz RNSS band . 15
5.4.4 Test method for GUE utilizing the 1 164 MHz to 1 300 MHz RNSS band . 16
5.5 Receiver spurious emissions test . 16
5.5.1 General . 16
5.5.2 Test conditions . 16
5.5.3 Test method . 17
5.5.3.1 Conducted measurement . 17
5.5.3.1.1 Introduction . 17
5.5.3.1.2 Pre-scan . 17
5.5.3.1.3 Measurement of the emissions identified during the pre-scan . 18
5.5.3.2 Radiated measurement . 18
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 19
Annex B (normative): Details of parameters used in technical requirements specifications
(clause 4) . 20
B.1 Blocking signal . 20
B.1.1 Definition . 20
B.1.2 Measurement technique for validation of the blocking signal settings . 21
B.2 GNSS signals . 21
B.2.1 Definition . 21
B.2.2 GNSS signal details . 21
B.2.3 GNSS satellite details . 22
Annex C (informative): C/N degradation metric. 23
0
C.1 General . 23
C.2 Definition . 23
C.3 Example calculation of nominal 1 dB degradation of C/N . 23
0
Annex D (informative): Test Report Application Form for ETSI EN 303 413 . 25
D.1 The right to copy . 25
D.2 General . 25
D.3 Information as required by clause 5.4.3 and clause 5.4.4 . 25
D.4 Information as required by clause 5.5 . 27
Annex E (informative): GNSS Interface Specifications . 29
Annex F (informative): Background to Conformance specifications . 30
F.1 Introduction . 30
F.2 Metric used for measurements in GNSS receivers . 30
F.3 Receiver sensitivity . 30
F.3.1 Definition . 30
F.3.2 Justification for non-inclusion . 30
F.4 Receiver co-channel rejection . 31
F.4.1 Definition . 31
F.4.2 Justification for non-inclusion . 31
F.5 Receiver Selectivity . 31
F.5.1 Definition . 31
F.5.2 Justification for non-inclusion . 31
F.6 Other receiver effects . 32
F.6.1 Receiver dynamic range . 32
F.6.1.1 Definition . 32
F.6.1.2 Justification for non-inclusion . 32
F.6.2 Reciprocal mixing . 32
F.6.2.1 Definition . 32
F.6.2.2 Justification for non-inclusion . 32
Annex G (informative): Change history . 33
History . 34


ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth
Stations and Systems (SES), and is now submitted for the Vote phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.8] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
Executive summary
The present document gives the technical requirements (clause 4) and test methodology (clause 5) for presumption of
conformity of GNSS User Equipment with article 3.2 of Directive 2014/53/EU [i.1].
Introduction
The present document defines technical requirements to support the essential requirements of article 3.2 of Directive
2014/53/EU [i.1] which states "Radio equipment shall be so constructed that it both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference".
The present document does not contain any requirement, recommendation or information about the installation of the
GNSS user equipment.

ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
1 Scope
The present document specifies technical characteristics and methods of measurements for Global Navigation Satellite
System (GNSS) User Equipment (GUE).
Global Navigation Satellite System (GNSS) User Equipment (GUE) is capable of operating as part of one or more
RadioNavigation-Satellite Service (RNSS) systems in the RNSS frequency bands given in table 1-1.
Table 1-1: RadioNavigation-Satellite Service (RNSS) frequency bands
RNSS frequency bands Comments
1 164 MHz to 1 300 MHz space-to-Earth
1 559 MHz to 1 610 MHz space-to-Earth

A GUE receives radio signals from one or more GNSS constellation for the purpose of radiodetermination of the
position, velocity and/or other characteristics of an object or the obtaining of information relating to those parameters,
by means of the propagation properties of radio waves. RNSS is defined as "A radiodetermination-satellite service used
for the purpose of radionavigation" (No. 1.43 of the ITU Radio Regulations [i.13]).
The present document applies to all GUE operating in the bands given in table 1-1 with the ability to receive any GNSS
constellation (e.g. BeiDou (BDS), Galileo, Global Navigation Satellite System (GLONASS), Global Positioning System
(GPS), Space Based Augmentation System (SBAS)).
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 328 (V2.2.2): "Wideband transmission systems; Data transmission equipment
operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum".
ETSI

---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EG 203 336 (V1.2.1): "Guide for the selection of technical parameters for the production of
Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.3] Recommendation ITU-R M.1787: "Description of systems and networks in the radionavigation-
satellite service (space-to-Earth and space-to-space) and technical characteristics of transmitting
space stations operating in the bands 1 164-1 215 MHz, 1 215-1 300 MHz and 1 559-1 610 MHz".
[i.4] Recommendation ITU-R M.1901: "Guidance on ITU-R Recommendations related to systems and
networks in the radionavigation-satellite service operating in the frequency bands
1 164-1 215 MHz, 1 215-1 300 MHz, 1 559-1 610 MHz, 5 000-5 010 MHz and
5 010-5 030 MHz".
[i.5] Recommendation ITU-R M.1902: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 215-1 300 MHz".
[i.6] Recommendation ITU-R M.1903: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) and receivers in the aeronautical
radionavigation service operating in the band 1 559-1 610 MHz".
[i.7] Recommendation ITU-R M.1905: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 164-1 215 MHz".
[i.8] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
[i.9] CISPR 16-1-4:2019: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements".
[i.10] ETSI TR 102 273 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Improvement on Radiated Methods of Measurement (using test site) and evaluation of the
corresponding measurement uncertainties".
[i.11] Void.
[i.12] Void.
[i.13] ITU Radio Regulations (edition of 2016).
[i.14] EN IEC 55016-1-1: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus"
(produced by CENELEC).
ETSI

---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
[i.15] EN 55016-2-3: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 2-3: Methods of measurements of disturbances and immunity - Radiated
disturbance measurements" (produced by CENELEC).
[i.16] EN 55032: "Electromagnetic compatibility of multimedia equipment - Emission requirements"
(produced by CENELEC).
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
C/N : carrier to noise-density ratio, expressed in dB-Hz
0
NOTE: The ratio of the received (GNSS) signal carrier power C, in dBW or dBm, to the noise power spectral
density, in dBW/Hz or dBm/Hz, in the absence of interference.
C/(N +I): carrier to noise-and-interference-density ratio, C/(N +I), in dB-Hz
0 0
conducted measurements: measurements of the performance of the EUT made by direct wired connection to the
antenna port
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
GNSS User Equipment (GUE): radiodetermination equipment capable of receiving signals from one or more GNSS
constellation
NOTE: Such a receiver can acquire and then track GNSS signals to determine its location and/or velocity and/or
time and/or other related parameters.
radiated measurements: measurements of the performance of the EUT made by placing the EUT in a suitable shielded
container and radiating the required signals to the EUT
NOTE: I.e. without using a direct wired connection to the antenna port.
RadioNavigation-Satellite Service (RNSS): services used for the purpose of radionavigation, that is for the
determination of the position, velocity, and/or other characteristics of an object
NOTE: Includes the use of GNSS and other RNSS systems.
RNSS frequency band: continuous ranges of frequencies detailed in table 1-1, allocated by the ITU Radio
Regulations [i.13] to the RNSS
spurious emissions: any unintentional GUE emissions, whether inside or outside the receiver bandwidth
NOTE: Since a GNSS receiver is receive-only, any emission is unintentional.
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AM(R)S Aeronautical Mobile (Route) Service
ARNS Aeronautical RadioNavigation Service
AWGN Additive White Gaussian Noise
ETSI

---------------------- Page: 9 ----------------------
10 Final draft ETSI EN 303 413 V1.2.1 (2021-02)
BDS BeiDou Navigation Satellite System
NOTE: See Recommendation ITU-R M.1787 [i.3], annex 7.
CISPR Comité International Spécial des Perturbations Radioélectriques
DDC Digital Down Conversion
e.i.r.p. effective isotropically radiated power
e.r.p. effective radiated
...

Draft ETSI EN 303 413 V1.2.0 (2020-09)






HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Global Navigation Satellite System (GNSS) receivers;
Radio equipment operating in the 1 164 MHz to 1 300 MHz
and 1 559 MHz to 1 610 MHz frequency bands;
Harmonised Standard for access to radio spectrum

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 413 V1.2.0 (2020-09)



Reference
REN/SES-00445
Keywords
GNSS, harmonised standard, navigation,
receiver, satellite

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Executive summary . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance specifications . 11
4.2.1 Receiver blocking . 11
4.2.1.1 Definition . 11
4.2.1.2 Specification. 11
4.2.1.3 Conformance . 12
4.2.2 Receiver spurious emissions . 12
4.2.2.1 Definition . 12
4.2.2.2 Specification. 12
4.2.2.3 Conformance . 13
5 Testing for conformance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Void . 13
5.3 Test methodology for receiver blocking . 13
5.3.1 General . 13
5.3.2 Test setup for conducted measurements . 13
5.3.2.1 Test equipment . 13
5.3.2.2 EUT configuration . 14
5.3.3 Test setup for radiated measurements . 14
5.3.3.1 General . 14
5.3.3.2 Test equipment . 14
5.3.3.3 EUT configuration . 14
5.4 Receiver blocking test . 15
5.4.1 General . 15
5.4.2 Test conditions . 15
5.4.3 Test method for GUE utilizing the 1 559 MHz to 1 610 MHz RNSS band . 15
5.4.4 Test method for GUE utilizing the 1 164 MHz to 1 300 MHz RNSS band . 16
5.5 Receiver spurious emissions test . 16
5.5.1 General . 16
5.5.2 Test conditions . 16
5.5.3 Test method . 17
5.5.3.1 Conducted measurement . 17
5.5.3.1.1 Introduction . 17
5.5.3.1.2 Pre-scan . 17
5.5.3.1.3 Measurement of the emissions identified during the pre-scan . 18
5.5.3.2 Radiated measurement . 18
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 19
Annex B (normative): Details of parameters used in technical requirements specifications
(clause 4) . 20
B.1 Blocking signal . 20
B.1.1 Definition . 20
B.1.2 Measurement technique for validation of the blocking signal settings . 21
B.2 GNSS signals . 21
B.2.1 Definition . 21
B.2.2 GNSS signal details . 21
B.2.3 GNSS satellite details . 22
Annex C (informative): C/N degradation metric. 23
0
C.1 General . 23
C.2 Definition . 23
C.3 Example calculation of nominal 1 dB degradation of C/N . 23
0
Annex D (informative): Test Report Application Form for ETSI EN 303 413 . 25
D.1 The right to copy . 25
D.2 General . 25
D.3 Information as required by clause 5.4.3 and clause 5.4.4 . 25
D.4 Information as required by clause 5.5 . 27
Annex E (informative): GNSS Interface Specifications . 29
Annex F (informative): Background to Conformance specifications . 30
F.1 Introduction . 30
F.2 Metric used for measurements in GNSS receivers . 30
F.3 Receiver sensitivity . 30
F.3.1 Definition . 30
F.3.2 Justification for non-inclusion . 30
F.4 Receiver co-channel rejection . 31
F.4.1 Definition . 31
F.4.2 Justification for non-inclusion . 31
F.5 Receiver Selectivity . 31
F.5.1 Definition . 31
F.5.2 Justification for non-inclusion . 31
F.6 Other receiver effects . 32
F.6.1 Receiver dynamic range . 32
F.6.1.1 Definition . 32
F.6.1.2 Justification for non-inclusion . 32
F.6.2 Reciprocal mixing . 32
F.6.2.1 Definition . 32
F.6.2.2 Justification for non-inclusion . 32
Annex G (informative): Change history . 33
History . 34


ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth
Stations and Systems (SES), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.8] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Executive summary
The present document gives the technical requirements (clause 4) and test methodology (clause 5) for presumption of
conformity of GNSS User Equipment with article 3.2 of the Radio Equipment Directive (2014/53/EU) [i.1].
Introduction
The present document defines technical requirements to support the essential requirements of article 3.2 of the Radio
Equipment Directive [i.1] which states "Radio equipment shall be so constructed that it both effectively uses and
supports the efficient use of radio spectrum in order to avoid harmful interference".
The present document does not contain any requirement, recommendation or information about the installation of the
GNSS user equipment.

ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 303 413 V1.2.0 (2020-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for Global Navigation Satellite
System (GNSS) User Equipment (GUE).
Global Navigation Satellite System (GNSS) User Equipment (GUE) is capable of operating as part of one or more
RadioNavigation-Satellite Service (RNSS) systems in the RNSS frequency bands given in table 1-1.
Table 1-1: RadioNavigation-Satellite Service (RNSS) frequency bands
RNSS frequency bands Comments
1 164 MHz to 1 300 MHz space-to-Earth
1 559 MHz to 1 610 MHz space-to-Earth

A GUE receives radio signals from one or more GNSS constellation for the purpose of radiodetermination of the
position, velocity and/or other characteristics of an object or the obtaining of information relating to those parameters,
by means of the propagation properties of radio waves. RNSS is defined as "A radiodetermination-satellite service used
for the purpose of radionavigation" (No. 1.43 of the ITU Radio Regulations [i.13]).
The present document applies to all GUE operating in the bands given in table 1-1 with the ability to receive any GNSS
constellation (e.g. BeiDou (BDS), Galileo, Global Navigation Satellite System (GLONASS), Global Positioning System
(GPS), Space Based Augmentation System (SBAS)).
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 328 (V2.2.2) (07-2019): "Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum".
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 303 413 V1.2.0 (2020-09)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EG 203 336 (V1.2.1) (2020-05): "Guide for the selection of technical parameters for the
production of Harmonised Standards covering article 3.1(b) and article 3.2 of
Directive 2014/53/EU".
[i.3] Recommendation ITU-R M.1787: "Description of systems and networks in the radionavigation-
satellite service (space-to-Earth and space-to-space) and technical characteristics of transmitting
space stations operating in the bands 1 164-1 215 MHz, 1 215-1 300 MHz and 1 559-1 610 MHz".
[i.4] Recommendation ITU-R M.1901: "Guidance on ITU-R Recommendations related to systems and
networks in the radionavigation-satellite service operating in the frequency bands
1 164-1 215 MHz, 1 215-1 300 MHz, 1 559-1 610 MHz, 5 000-5 010 MHz and
5 010-5 030 MHz".
[i.5] Recommendation ITU-R M.1902: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 215-1 300 MHz".
[i.6] Recommendation ITU-R M.1903: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) and receivers in the aeronautical
radionavigation service operating in the band 1 559-1 610 MHz".
[i.7] Recommendation ITU-R M.1905: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 164-1 215 MHz".
[i.8] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
[i.9] CISPR 16-1-4:2019: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements".
[i.10] ETSI TR 102 273 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Improvement on Radiated Methods of Measurement (using test site) and evaluation of the
corresponding measurement uncertainties".
[i.11] Void.
[i.12] Void.
[i.13] ITU Radio Regulations (edition of 2016).
[i.14] EN IEC 55016-1-1: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus"
(produced by CENELEC).
ETSI

---------------------- Page: 8 ----------------------
9 Draft ETSI EN 303 413 V1.2.0 (2020-09)
[i.15] EN 55016-2-3: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 2-3: Methods of measurements of disturbances and immunity - Radiated
disturbance measurements" (produced by CENELEC).
[i.16] EN 55032: "Electromagnetic compatibility of multimedia equipment - Emission requirements"
(produced by CENELEC).
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
C/N : carrier to noise-density ratio, expressed in dB-Hz
0
NOTE: The ratio of the received (GNSS) signal carrier power C, in dBW or dBm, to the noise power spectral
density, in dBW/Hz or dBm/Hz, in the absence of interference.
C/(N +I): carrier to noise-and-interference-density ratio, C/(N +I), in dB-Hz
0 0
conducted measurements: measurements of the performance of the EUT made by direct wired connection to the
antenna port
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
GNSS User Equipment (GUE): radiodetermination equipment capable of receiving signals from one or more GNSS
constellation
NOTE: Such a receiver can acquire and then track GNSS signals to determine its location and/or velocity and/or
time and/or other related parameters.
radiated measurements: measurements of the performance of the EUT made by placing the EUT in a suitable shielded
container and radiating the required signals to the EUT
NOTE: I.e. without using a direct wired connection to the antenna port.
RadioNavigation-Satellite Service (RNSS): services used for the purpose of radionavigation, that is for the
determination of the position, velocity, and/or other characteristics of an object
NOTE: Includes the use of GNSS and other RNSS systems.
RNSS frequency band: continuous ranges of frequencies detailed in table 1-1, allocated by the ITU Radio
Regulations [i.13] to the RNSS
spurious emissions: any unintentional GUE emissions, whether inside or outside the receiver bandwidth
NOTE: Since a GNSS receiver is receive-only, any emission is unintentional.
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AM(R)S Aeronautical Mobile (Route) Service
ARNS Aeronautical RadioNavigation Service
AWGN Additive White Gaussian Noise
ETSI

---------------------- Page: 9 ----------------------
10 Draft ETSI EN 303 413 V1.2.0 (2020-09)
BDS BeiDou Navigation Satellite System
NOTE: See Recommendation ITU-R M.1787 [i.3], annex 7.
CISPR Comité International Spécial des Perturbations Radioélectriques
DDC Digital Down Conversion
e.i.r.p. effective isotropically radiated power
e.r
...

SLOVENSKI STANDARD
oSIST prEN 303 413 V1.2.0:2020
01-december-2020
Satelitske zemeljske postaje in sistemi (SES) - Sprejemniki globalnih navigacijskih
satelitskih sistemov (GNSS) - Radijska oprema, ki deluje v frekvenčnih pasovih od
1164 MHz do 1300 MHz in od 1559 MHz do 1610 MHz - Harmonizirani standard za
dostop do radijskega spektra
Satellite Earth Stations and Systems (SES) - Global Navigation Satellite System (GNSS)
receivers - Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to
1 610 MHz frequency bands - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 413 V1.2.0 (2020-09)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.070.40 Satelit Satellite
oSIST prEN 303 413 V1.2.0:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 303 413 V1.2.0:2020

---------------------- Page: 2 ----------------------
oSIST prEN 303 413 V1.2.0:2020
Draft ETSI EN 303 413 V1.2.0 (2020-09)






HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Global Navigation Satellite System (GNSS) receivers;
Radio equipment operating in the 1 164 MHz to 1 300 MHz
and 1 559 MHz to 1 610 MHz frequency bands;
Harmonised Standard for access to radio spectrum

---------------------- Page: 3 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 2 Draft ETSI EN 303 413 V1.2.0 (2020-09)



Reference
REN/SES-00445
Keywords
GNSS, harmonised standard, navigation,
receiver, satellite

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 3 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Executive summary . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance specifications . 11
4.2.1 Receiver blocking . 11
4.2.1.1 Definition . 11
4.2.1.2 Specification. 11
4.2.1.3 Conformance . 12
4.2.2 Receiver spurious emissions . 12
4.2.2.1 Definition . 12
4.2.2.2 Specification. 12
4.2.2.3 Conformance . 13
5 Testing for conformance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Void . 13
5.3 Test methodology for receiver blocking . 13
5.3.1 General . 13
5.3.2 Test setup for conducted measurements . 13
5.3.2.1 Test equipment . 13
5.3.2.2 EUT configuration . 14
5.3.3 Test setup for radiated measurements . 14
5.3.3.1 General . 14
5.3.3.2 Test equipment . 14
5.3.3.3 EUT configuration . 14
5.4 Receiver blocking test . 15
5.4.1 General . 15
5.4.2 Test conditions . 15
5.4.3 Test method for GUE utilizing the 1 559 MHz to 1 610 MHz RNSS band . 15
5.4.4 Test method for GUE utilizing the 1 164 MHz to 1 300 MHz RNSS band . 16
5.5 Receiver spurious emissions test . 16
5.5.1 General . 16
5.5.2 Test conditions . 16
5.5.3 Test method . 17
5.5.3.1 Conducted measurement . 17
5.5.3.1.1 Introduction . 17
5.5.3.1.2 Pre-scan . 17
5.5.3.1.3 Measurement of the emissions identified during the pre-scan . 18
5.5.3.2 Radiated measurement . 18
ETSI

---------------------- Page: 5 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 4 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 19
Annex B (normative): Details of parameters used in technical requirements specifications
(clause 4) . 20
B.1 Blocking signal . 20
B.1.1 Definition . 20
B.1.2 Measurement technique for validation of the blocking signal settings . 21
B.2 GNSS signals . 21
B.2.1 Definition . 21
B.2.2 GNSS signal details . 21
B.2.3 GNSS satellite details . 22
Annex C (informative): C/N degradation metric. 23
0
C.1 General . 23
C.2 Definition . 23
C.3 Example calculation of nominal 1 dB degradation of C/N . 23
0
Annex D (informative): Test Report Application Form for ETSI EN 303 413 . 25
D.1 The right to copy . 25
D.2 General . 25
D.3 Information as required by clause 5.4.3 and clause 5.4.4 . 25
D.4 Information as required by clause 5.5 . 27
Annex E (informative): GNSS Interface Specifications . 29
Annex F (informative): Background to Conformance specifications . 30
F.1 Introduction . 30
F.2 Metric used for measurements in GNSS receivers . 30
F.3 Receiver sensitivity . 30
F.3.1 Definition . 30
F.3.2 Justification for non-inclusion . 30
F.4 Receiver co-channel rejection . 31
F.4.1 Definition . 31
F.4.2 Justification for non-inclusion . 31
F.5 Receiver Selectivity . 31
F.5.1 Definition . 31
F.5.2 Justification for non-inclusion . 31
F.6 Other receiver effects . 32
F.6.1 Receiver dynamic range . 32
F.6.1.1 Definition . 32
F.6.1.2 Justification for non-inclusion . 32
F.6.2 Reciprocal mixing . 32
F.6.2.1 Definition . 32
F.6.2.2 Justification for non-inclusion . 32
Annex G (informative): Change history . 33
History . 34


ETSI

---------------------- Page: 6 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 5 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth
Stations and Systems (SES), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.8] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 7 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 6 Draft ETSI EN 303 413 V1.2.0 (2020-09)
Executive summary
The present document gives the technical requirements (clause 4) and test methodology (clause 5) for presumption of
conformity of GNSS User Equipment with article 3.2 of the Radio Equipment Directive (2014/53/EU) [i.1].
Introduction
The present document defines technical requirements to support the essential requirements of article 3.2 of the Radio
Equipment Directive [i.1] which states "Radio equipment shall be so constructed that it both effectively uses and
supports the efficient use of radio spectrum in order to avoid harmful interference".
The present document does not contain any requirement, recommendation or information about the installation of the
GNSS user equipment.

ETSI

---------------------- Page: 8 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 7 Draft ETSI EN 303 413 V1.2.0 (2020-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for Global Navigation Satellite
System (GNSS) User Equipment (GUE).
Global Navigation Satellite System (GNSS) User Equipment (GUE) is capable of operating as part of one or more
RadioNavigation-Satellite Service (RNSS) systems in the RNSS frequency bands given in table 1-1.
Table 1-1: RadioNavigation-Satellite Service (RNSS) frequency bands
RNSS frequency bands Comments
1 164 MHz to 1 300 MHz space-to-Earth
1 559 MHz to 1 610 MHz space-to-Earth

A GUE receives radio signals from one or more GNSS constellation for the purpose of radiodetermination of the
position, velocity and/or other characteristics of an object or the obtaining of information relating to those parameters,
by means of the propagation properties of radio waves. RNSS is defined as "A radiodetermination-satellite service used
for the purpose of radionavigation" (No. 1.43 of the ITU Radio Regulations [i.13]).
The present document applies to all GUE operating in the bands given in table 1-1 with the ability to receive any GNSS
constellation (e.g. BeiDou (BDS), Galileo, Global Navigation Satellite System (GLONASS), Global Positioning System
(GPS), Space Based Augmentation System (SBAS)).
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 328 (V2.2.2) (07-2019): "Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum".
ETSI

---------------------- Page: 9 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 8 Draft ETSI EN 303 413 V1.2.0 (2020-09)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EG 203 336 (V1.2.1) (2020-05): "Guide for the selection of technical parameters for the
production of Harmonised Standards covering article 3.1(b) and article 3.2 of
Directive 2014/53/EU".
[i.3] Recommendation ITU-R M.1787: "Description of systems and networks in the radionavigation-
satellite service (space-to-Earth and space-to-space) and technical characteristics of transmitting
space stations operating in the bands 1 164-1 215 MHz, 1 215-1 300 MHz and 1 559-1 610 MHz".
[i.4] Recommendation ITU-R M.1901: "Guidance on ITU-R Recommendations related to systems and
networks in the radionavigation-satellite service operating in the frequency bands
1 164-1 215 MHz, 1 215-1 300 MHz, 1 559-1 610 MHz, 5 000-5 010 MHz and
5 010-5 030 MHz".
[i.5] Recommendation ITU-R M.1902: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 215-1 300 MHz".
[i.6] Recommendation ITU-R M.1903: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) and receivers in the aeronautical
radionavigation service operating in the band 1 559-1 610 MHz".
[i.7] Recommendation ITU-R M.1905: "Characteristics and protection criteria for receiving earth
stations in the radionavigation-satellite service (space-to-Earth) operating in the band
1 164-1 215 MHz".
[i.8] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
[i.9] CISPR 16-1-4:2019: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements".
[i.10] ETSI TR 102 273 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Improvement on Radiated Methods of Measurement (using test site) and evaluation of the
corresponding measurement uncertainties".
[i.11] Void.
[i.12] Void.
[i.13] ITU Radio Regulations (edition of 2016).
[i.14] EN IEC 55016-1-1: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus"
(produced by CENELEC).
ETSI

---------------------- Page: 10 ----------------------
oSIST prEN 303 413 V1.2.0:2020
 9 Draft ETSI EN 303 413 V1.2.0 (2020-09)
[i.15] EN 55016-2-3: "Specification for radio disturbance and immunity measuring apparatus and
methods - Part 2-3: Methods of measurements of disturbances and immunity - Radiated
disturbance measurements" (produced by CENELEC).
[i.16] EN 55032: "Electromagnetic compatibility of multimedia equipment - Emission requirements"
(produced by CENELEC).
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in Directive 2014/53/EU [i.1] and the following apply:
C/N : carrier to noise-density ratio, expressed in dB-Hz
0
NOTE: The ratio of the received (GNSS) signal carrier power C, in dBW or dBm, to the noise power spectral
density, in dBW/Hz or dBm/Hz, in the absence of interference.
C/(N +I): carrier to noise-and-interference-density ratio, C/(N +I), in dB-Hz
0 0
conducted measurements: measurements of the performance of the EUT made by direct wired connection to the
antenna port
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
GNSS User Equipment (GUE): radiodetermination equipment capable of receiving signals from one or more GNSS
constellation
NOTE: Such a receiver can acquire and then track GNSS signals to determine its location and/or velocity and/or
time and/or other related parameters.
radiated measurements: measurements of the pe
...