ETSI EN 303 753 V1.1.0 (2024-03)

Final draft ETSI EN 303 753 V1.1.0 (2024-03)

HARMONISED EUROPEAN STANDARD
Wideband Data Transmission Systems (WDTS)
for Mobile and Fixed Radio Equipment
operating in the 57 - 71 GHz band;
Harmonised Standard for access to radio spectrum

2 Final draft ETSI EN 303 753 V1.1.0 (2024-03)

Reference
DEN/BRAN-230026
Keywords
60 GHz, access, broadband, radio, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Final draft ETSI EN 303 753 V1.1.0 (2024-03)
Contents
Intellectual Property Rights . 6
Foreword. 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Occupied channel bandwidth . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 RF output power . 11
4.2.2.1 Definition . 11
4.2.2.2 Limit . 11
4.2.2.3 Conformance . 12
4.2.3 Power Spectral Density . 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter unwanted emissions . 12
4.2.4.1 Transmitter unwanted emissions in the out-of-band domain . 12
4.2.4.1.1 Definition . 12
4.2.4.1.2 Limit . 12
4.2.4.1.3 Conformance . 13
4.2.4.2 Transmitter unwanted emissions in the spurious domain . 13
4.2.4.2.1 Definition . 13
4.2.4.2.2 Limit . 13
4.2.4.2.3 Conformance . 14
4.2.5 Receiver spurious emissions . 14
4.2.5.1 Definition . 14
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 14
4.2.6 Spectrum sharing mechanisms . 14
4.2.6.0 General . 14
4.2.6.1 Beamforming . 15
4.2.6.1.1 Definition . 15
4.2.6.1.2 Limit . 15
4.2.6.1.3 Conformance . 15
4.2.6.2 Automatic Transmit Power Control and Automatic Link Adaptation . 15
4.2.6.2.1 Definition . 15
4.2.6.2.2 Limit . 15
4.2.6.2.3 Conformance . 15
4.2.7 Receiver sensitivity . 16
4.2.7.1 Definition . 16
4.2.7.2 Performance Criteria. 16
4.2.7.3 Limit . 16
ETSI
4 Final draft ETSI EN 303 753 V1.1.0 (2024-03)
4.2.7.4 Conformance . 16
4.2.8 Receiver Adjacent Channel Selectivity . 16
4.2.8.1 Definition . 16
4.2.8.2 Limit . 16
4.2.8.3 Conformance . 16
5 Testing for compliance with technical requirements. 17
5.1 Environmental conditions for testing . 17
5.1.1 General . 17
5.1.2 Normal test conditions . 17
5.1.2.1 Normal temperature and humidity . 17
5.1.2.2 Normal power source. 17
5.1.3 Extreme test conditions . 17
5.2 Interpretation of the measurement results . 17
5.3 Test procedure for the essential radio test suites . 17
5.3.0 General . 17
5.3.0a Product Information . 18
5.3.0b Test modulation, frequency and configuration . 18
5.3.1 Occupied ch
...

ETSI EN 303 753 V1.1.1 (2024-05)

HARMONISED EUROPEAN STANDARD
Wideband Data Transmission Systems (WDTS)
for Mobile and Fixed Radio Equipment
operating in the 57 - 71 GHz band;
Harmonised Standard for access to radio spectrum

2 ETSI EN 303 753 V1.1.1 (2024-05)

Reference
DEN/BRAN-230026
Keywords
60 GHz, access, broadband, radio, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 303 753 V1.1.1 (2024-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Occupied channel bandwidth . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 RF output power . 11
4.2.2.1 Definition . 11
4.2.2.2 Limit . 11
4.2.2.3 Conformance . 12
4.2.3 Power Spectral Density . 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter unwanted emissions . 12
4.2.4.1 Transmitter unwanted emissions in the out-of-band domain . 12
4.2.4.1.1 Definition. 12
4.2.4.1.2 Limit . 12
4.2.4.1.3 Conformance . 13
4.2.4.2 Transmitter unwanted emissions in the spurious domain . 13
4.2.4.2.1 Definition. 13
4.2.4.2.2 Limit . 13
4.2.4.2.3 Conformance . 14
4.2.5 Receiver spurious emissions . 14
4.2.5.1 Definition . 14
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 14
4.2.6 Spectrum sharing mechanisms . 14
4.2.6.0 General . 14
4.2.6.1 Beamforming . 15
4.2.6.1.1 Definition. 15
4.2.6.1.2 Limit . 15
4.2.6.1.3 Conformance . 15
4.2.6.2 Automatic Transmit Power Control and Automatic Link Adaptation . 15
4.2.6.2.1 Definition. 15
4.2.6.2.2 Limit . 15
4.2.6.2.3 Conformance . 15
4.2.7 Receiver sensitivity . 16
4.2.7.1 Definition . 16
4.2.7.2 Performance Criteria . 16
4.2.7.3 Limit . 16
ETSI
4 ETSI EN 303 753 V1.1.1 (2024-05)
4.2.7.4 Conformance . 16
4.2.8 Receiver Adjacent Channel Selectivity. 16
4.2.8.1 Definition . 16
4.2.8.2 Limit . 16
4.2.8.3 Conformance . 16
5 Testing for compliance with technical requirements . 17
5.1 Environmental conditions for testing . 17
5.1.1 General . 17
5.1.2 Normal test conditions . 17
5.1.2.1 Normal temperature and humidity . 17
5.1.2.2 Normal power source . 17
5.1.3 Extreme test conditions . 17
5.2 Interpretation of the measurement results . 17
5.3 Test procedure for the essential radio test suites . 17
5.3.0 General . 17
5.3.0a Product Information . 18
5.3.0b Test modulation, frequency and configuration . 18
5.3.1 Occupied channel ban
...

SLOVENSKI STANDARD
01-oktober-2024
Širokopasovni sistemi za prenos podatkov (WDTS) za mobilno in fiksno radijsko
opremo, ki delujejo v pasu od 57 GHz do 71 GHz - Harmonizirani standard za
dostop do radijskega spektra
Wideband Data Transmission Systems (WDTS) for Mobile and Fixed Radio Equipment
operating in the 57 - 71 GHz band - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 753 V1.1.1 (2024-05)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI EN 303 753 V1.1.1 (2024-05)

HARMONISED EUROPEAN STANDARD
Wideband Data Transmission Systems (WDTS)
for Mobile and Fixed Radio Equipment
operating in the 57 - 71 GHz band;
Harmonised Standard for access to radio spectrum

2 ETSI EN 303 753 V1.1.1 (2024-05)

Reference
DEN/BRAN-230026
Keywords
60 GHz, access, broadband, radio, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 303 753 V1.1.1 (2024-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Occupied channel bandwidth . 11
4.2.1.1 Definition . 11
4.2.1.2 Limit . 11
4.2.1.3 Conformance . 11
4.2.2 RF output power . 11
4.2.2.1 Definition . 11
4.2.2.2 Limit . 11
4.2.2.3 Conformance . 12
4.2.3 Power Spectral Density . 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter unwanted emissions . 12
4.2.4.1 Transmitter unwanted emissions in the out-of-band domain . 12
4.2.4.1.1 Definition. 12
4.2.4.1.2 Limit . 12
4.2.4.1.3 Conformance . 13
4.2.4.2 Transmitter unwanted emissions in the spurious domain . 13
4.2.4.2.1 Definition. 13
4.2.4.2.2 Limit . 13
4.2.4.2.3 Conformance . 14
4.2.5 Receiver spurious emissions . 14
4.2.5.1 Definition . 14
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 14
4.2.6 Spectrum sharing mechanisms . 14
4.2.6.0 General . 14
4.2.6.1 Beamforming . 15
4.2.6.1.1 Definition. 15
4.2.6.1.2 Limit . 15
4.2.6.1.3 Conformance . 15
4.2.6.2 Automatic Transmit Power Control and Automatic Link Adaptation . 15
4.2.6.2.1 Definition. 15
4.2.6.2.2 Limit . 15
4.2.6.2.3 Conformance . 15
4.2.7 Receiver sensitivity . 16
4.2.7.1 Definition . 16
4.2.7.2 Performance Criteria . 16
4.2.7.3 Limit . 16
ETSI
4 ETSI EN 303 753 V1.1.1 (2024-05)
4.2.7.4 Conformance . 16
4.2.8 Receiver Adjacent Channel Selectivity. 16
4.2.8.1 Definition . 16
4.2.8.2 Limit . 16
4.2.8.3 Conformance . 16
5 Testing for compliance with technical requirements . 17
5.1 Environmental conditions for testing . 17
5.1.1 General . 17
5.1.2 Normal test conditions . 17
5.1.2.1 Normal temperature and humidity . 17
5.1.2.2 Normal power source . 17
5.1.3 Extreme t
...