ETSI EN 302 065-4-4 V2.1.1 (2025-07)

SLOVENSKI STANDARD
oSIST prEN 302 065-4-4 V2.0.0:2025
01-maj-2025
Naprave kratkega dosega (SRD), ki uporabljajo ultra širokopasovno (UWB)
tehnologijo - Harmonizirani standard za dostop do radijskega spektra - 4. del:
Zaznavala snovi - 4. poddel: Naprave za zaznavanje zunanjih materialov za talna
vozila pod 10,6 GHz
Short Range Devices (SRD) using Ultra Wide Band technology (UWB) - Harmonised
Standard for access to radio spectrum - Part 4: Material Sensing devices - Sub-part 4:
Exterior material sensing applications for ground based vehicles below 10,6 GHz
Ta slovenski standard je istoveten z: ETSI EN 302 065-4-4 V2.0.0 (2025-03)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
oSIST prEN 302 065-4-4 V2.0.0:2025 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 302 065-4-4 V2.0.0:2025

oSIST prEN 302 065-4-4 V2.0.0:2025
Draft ETSI EN 302 065-4-4 V2.0.0 (2025-03)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) using
Ultra Wide Band technology (UWB);
Harmonised Standard for access to radio spectrum;
Part 4: Material Sensing devices;
Sub-part 4: Exterior material sensing applications for
ground based vehicles below 10,6 GHz

oSIST prEN 302 065-4-4 V2.0.0:2025
2 Draft ETSI EN 302 065-4-4 V2.0.0 (2025-03)

Reference
REN/ERM-TGUWB-617
Keywords
automotive, harmonised standard, measurement,
radiodetermination, SRD, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
oSIST prEN 302 065-4-4 V2.0.0:2025
3 Draft ETSI EN 302 065-4-4 V2.0.0 (2025-03)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 EUT categories . 11
4.2.1 General . 11
4.2.2 Categorization by Regulation . 11
4.2.3 Categorization by Modulation . 11
4.2.4 Categorization by Active Mitigation Techniques . 12
4.2.5 Summary EVS EUT categories . 12
4.3 Transmitter requirements . 12
4.3.1 General . 12
4.3.2 Operating Frequency Range (OFR) . 13
4.3.2.1 Applicability. 13
4.3.2.2 Description . 13
4.3.2.3 Limits . 13
4.3.2.4 Conformance . 13
4.3.3 Indirect emissions . 13
4.3.3.1 Applicability. 13
4.3.3.2 Description . 14
4.3.3.3 Limits for indirect emissions . 14
4.3.3.3.1 EUT without any active mitigation techniques . 14
4.3.3.3.2 EUT with active mitigation techniques . 15
4.3.3.4 Conformance . 15
4.3.4 TX Unwanted Emissions (TXUE) . 15
4.3.4.1 Applicability. 15
4.3.4.2 Description . 15
4.3.4.3 Limits . 16
4.3.4.4 Conformance . 16
4.3.5 Total Radiated Power spectral density (TRP ). 16
SD
4.3.5.1 Applicability. 16
4.3.5.2 Description . 16
4.3.5.3 Limits . 16
4.3.5.3.1 Limits for EUT without active mitigation techniques . 16
4.2.5.3.2 Limits for EUT with active mitigation technique . 17
4.3.5.4 Conformance . 17
4.3.6 Listen Before Talk (LBT) . 17
4.3.6.1 Applicability. 17
4.3.6.2 Description . 17
4.3.6.3 Limits . 18
4.3.6.4 Conformance . 18
4.3.7 Duty Cycle . 18
4.3.7.1 Applicability. 18
4.3.7.2 Description . 18
ETSI
oSIST prEN 302 065-4-4 V2.0.0:2025
4 Draft ETSI EN 302 065-4-4 V2.0.0 (2025-03)
4.3.7.3 Limits . 18
4.3.7.4 Conformance . 19
4.3.8 TX behaviour under the complete environmental profile . 19
4.3.8.1 Applicability. 19
4.3.8.2 Description . 19
4.3.8.3 Limits for conducted assessment of the TX behaviour . 19
4.3.8.4 Conformance . 20
4.4 Receiver conformance requirements . 20
4.4.1 General . 20
4.4.2 Wanted technical performance criteria . 20
4.4.3 Recei
...