ETSI EN 303 800-5 V1.1.1 (2024-11)

Draft ETSI EN 303 800-5 V1.1.0 (2024-08)

EUROPEAN STANDARD
Environmental Engineering (EE);
Assessment of material efficiency of ICT network
infrastructure goods (circular economy);
Part 5: Server and data storage product disassembly and
disassembly instruction
2 Draft ETSI EN 303 800-5 V1.1.0 (2024-08)

Reference
DEN/EE-EEPS47-5
Keywords
environment, e-waste management, server,
storage, waste management
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 303 800-5 V1.1.0 (2024-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Assessment of ability to disassemble . 10
4.1 Scope of the assessment . 10
4.2 Provision of instructions on disassembly operations . 11
4.2.1 Instruction content and availability . 11
4.3 Ensuring joining, fastening and sealing techniques do not prevent disassembly for repair or reuse
purposes . 11
Annex A (informative): Identified considerations for servers and storage products . 13
A.1 Scope . 13
A.2 Future proofness and Next-level subassembly . 13
A.3 Traceability . 14
A.4 Registration of repairers . 14
A.5 Exemptions . 14
History . 16

ETSI
4 Draft ETSI EN 303 800-5 V1.1.0 (2024-08)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE),
and is now submitted for the combined Public Enquiry and Vote phase of the ETSI EN Approval Procedure.
The present document is part 5 of a multi-part deliverable covering Environmental Engineering (EE); Assessment of
material efficiency of ICT network infrastructure goods (circular economy), as identified below:
Part 2: "Server and data storage product secure data deletion functionality";
Part 3: "Server and data storage product availability of firmware and of security updates to firmware";
Part 5: "Server and data storage product disassembly and disassembly instruction".
NOTE: Part 1 and Part 4 have been cancelled as their intended content is already covered by other standards.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa

ETSI
5 Draft ETSI EN 303 800-5 V1.1.0 (2024-08)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document contains methods to assess the ability to disassemble certain key parts of servers and data storage
products and the provision of information on these disassembly operations. The present document places a special
emphasis on aspects relevant to the circular economy, such as fostering durability and reparability, in particular by third
parties (such as spare parts repairers and maintenance).
ETSI
6 Draft ETSI EN 303 800-5 V1.1.0 (2024-08)
1 Scope
The present document specifies methods to measure the ability of the following products to be disassembled:
1) servers;
2) data storage equipment.
The present document covers:
i) The ability to disassemble, with particular regard to assessing that joining, fastening or sealing techniques do
not prevent the disassembly for repair or reuse purposes.
ii) The provision of instructions on the disassembly operations, including the type of operation, the type and
number of fastening technique(s) to be unlocked and the tool(s) required.
The following products are out of scope of the present document:
• servers intended for embedded applications;
• servers classified as small-scale servers in terms of Regulation (EU) No 617/2013 [i.4];
• servers with more than four processor sockets;
• server appliances;
• large servers;
• fully fault tolerant servers;
• network servers;
• small data storage products;
• large data storage products.
The decision whether a product should be repaired, reused or upgraded, is out of scope. It is dependent on a range of
factors including the various environmental aspects and other relevant considerations, such as safety and health,
technical requirements for functionality, quality and performance of the server or storage product.
NOTE: See Directive 2009/125/EC [i.1].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
ETSI
7 Draft ETSI EN 303 800-5 V1.1.0 (2024-08)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Commission Regulation (EU) 2019/424 of 15 March 2019 laying down ecodesign requirements
for servers and data storage products pursuant to Directive 2009/125/EC of the European
Parliament and of the Council and amending Commission Regulation (EU) No 617/2013.
[i.2] Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009
establishing a framework for the setting of ecodesign requirements for energy-related products
(recast).
[i.3] EN 45554: "General method for the assessment of the ability to repair, reuse and upgrade energy-
related products", produced by CEN.
[i.4] Commission Regulation (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC
of the European Parliament and of the Council with regard to ecodesign requireme
...