ETSI EN 301 843-5 V2.1.1 (2016-03)

ETSI EN 301 843-5 V2.1.1 (2016-03)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC) standard
for marine radio equipment and services;
Harmonised Standard covering the essential requirements
of article 3.1b of the Directive 2014/53/EU;
Part 5: Specific conditions for MF/HF radiotelephone
transmitters and receivers

---------------------- Page: 1 ----------------------
2 ETSI EN 301 843-5 V2.1.1 (2016-03)



Reference
REN/ERM-EMC-350
Keywords
EMC, harmonised standard, HF, maritime, MF,
radio, receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 301 843-5 V2.1.1 (2016-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 General and operational requirements . 7
4.1 Environmental profile . 7
4.2 Arrangements for test signals . 8
4.2.0 General . 8
4.2.1 Arrangements for test signals at the input of the transmitter . 8
4.2.2 Arrangements for test signals at the output of the transmitter . 8
4.2.3 Arrangements for test signals at the input of the receiver . 8
4.2.4 Arrangements for test signals at the output of the receiver . 8
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 8
4.3 Exclusion bands . 8
4.3.0 General . 8
4.3.1 Exclusion bands for receivers and receiver parts of transceivers . 8
4.3.2 Exclusion band for transmitters . 9
4.4 Narrow band responses on receivers . 9
4.5 Normal test modulation . 9
4.6 Artificial Antennae (non-radiating test load) . 9
5 Performance assessment . 10
5.1 General . 10
5.2 Equipment which can provide a continuous communication link . 10
5.3 Equipment which does not provide a continuous communication link . 10
5.4 Ancillary equipment . 10
5.5 Equipment classification . 10
6 Performance criteria . 10
6.0 General . 10
6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers. 10
6.2 Performance criteria B for transient phenomena applied to transmitters and receivers . 11
6.3 Performance criteria C applied to power supply failure . 11
6.4 Performance check . 11
6.4.0 General . 11
6.4.1 Transmitter . 11
6.4.2 Receiver . 11
6.5 Performance criteria for equipment which does not provide a continuous communication link . 11
6.6 Performance criteria for ancillary equipment tested on a stand-alone basis . 12
7 Applicability overview . 12
7.1 Emission . 12
7.1.1 General . 12
7.1.2 Special conditions . 12
7.2 Immunity . 12
7.2.1 General . 12
7.2.2 Special conditions . 12
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 301 843-5 V2.1.1 (2016-03)
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 13
Annex B (informative): Examples of types of MF/HF marine radiotelephone equipment in
the scope of the present document . 14
B.0 General . 14
B.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the
MF/HF bands . 14
History . 15


ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 301 843-5 V2.1.1 (2016-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 of ETSI EN 301 843-1 [1] confers, within the limits of
the scope of the present document, a presumption of conformity with the corresponding essential requirements of that
Directive, and associated EFTA regulations.
The present document is part 5 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 21 March 2016
Date of latest announcement of this EN (doa): 30 June 2016
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2016
Date of withdrawal of any conflicting National Standard (dow): 31 December 2017

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 301 843-5 V2.1.1 (2016-03)
1 Scope
The present document together with ETSI EN 301 843-1 [1], covers the assessment of MF/HF radiotelephone
transmitters and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone
transmitters and receivers are not included in the present document. Such technical specifications are found in the
related product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
radiotelephone transmitters and receivers for the maritime mobile service and the associated ancillary equipment.
Examples of types of MF/HF radiotelephone transmitters and receivers for the maritime mobile service covered by the
present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 843-1 [1], the provisions of the present document take precedence.
The electromagnetic environment used in the present document to develop the technical specifications encompasses the
electromagnetic environment on-board ships as identified in CENELEC EN 60945 [i.3].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
th
...

Draft ETSI EN 301 843-5 V2.1.0 (2015-12)






HARMONISED EUROPEAN STANDARD
Electromagnetic compatibility (EMC) standard
for marine radio equipment and services;
Harmonised Standard covering the essential requirements of
article 3.1b of the Directive 2014/53/EU;
Part 5: Specific conditions for MF/HF radiotelephone
transmitters and receivers

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 843-5 V2.1.0 (2015-12)



Reference
REN/ERM-EMC-350
Keywords
EMC, harmonised standard, HF, maritime, MF,
radio, receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 843-5 V2.1.0 (2015-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 General and operational requirements . 7
4.1 Environmental profile . 7
4.2 Arrangements for test signals . 8
4.2.0 General . 8
4.2.1 Arrangements for test signals at the input of the transmitter . 8
4.2.2 Arrangements for test signals at the output of the transmitter . 8
4.2.3 Arrangements for test signals at the input of the receiver . 8
4.2.4 Arrangements for test signals at the output of the receiver . 8
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 8
4.3 Exclusion bands . 8
4.3.0 General . 8
4.3.1 Exclusion bands for receivers and receiver parts of transceivers . 8
4.3.2 Exclusion band for transmitters . 9
4.4 Narrow band responses on receivers . 9
4.5 Normal test modulation . 9
4.6 Artificial Antennae (non-radiating test load) . 9
5 Performance assessment . 10
5.1 General . 10
5.2 Equipment which can provide a continuous communication link . 10
5.3 Equipment which does not provide a continuous communication link . 10
5.4 Ancillary equipment . 10
5.5 Equipment classification . 10
6 Performance criteria . 10
6.0 General . 10
6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers. 10
6.2 Performance criteria B for transient phenomena applied to transmitters and receivers . 11
6.3 Performance criteria C applied to power supply failure . 11
6.4 Performance check . 11
6.4.0 General . 11
6.4.1 Transmitter . 11
6.4.2 Receiver . 11
6.5 Performance criteria for equipment which does not provide a continuous communication link . 11
6.6 Performance criteria for ancillary equipment tested on a stand-alone basis . 12
7 Applicability overview . 12
7.1 Emission . 12
7.1.1 General . 12
7.1.2 Special conditions . 12
7.2 Immunity . 12
7.2.1 General . 12
7.2.2 Special conditions . 12
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 843-5 V2.1.0 (2015-12)
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 13
Annex B (informative): Examples of types of MF/HF marine radiotelephone equipment in
the scope of the present document . 14
B.0 General . 14
B.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the
MF/HF bands . 14
History . 15


ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 843-5 V2.1.0 (2015-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared in reply to the Commission's standardisation request Commission
Implementing Decision C(2015) 5376 final of 04.08.2015 to provide a means of conforming to the essential
requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making
available on the market of radio equipment.
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 of [1] confers, within the limits of the scope of the
present document, a presumption of conformity with the corresponding essential requirements of that Directive, and
associated EFTA regulations.
The present document is part 5 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 843-5 V2.1.0 (2015-12)
1 Scope
The present document together with ETSI EN 301 843-1 [1], covers the assessment of MF/HF radiotelephone
transmitters and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone
transmitters and receivers are not included in the present document. Such technical specifications are found in the
related product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
radiotelephone transmitters and receivers for the maritime mobile service and the associated ancillary equipment.
Examples of types of MF/HF radiotelephone transmitters and receivers for the maritime mobile service covered by the
present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 843-1 [1], the provisions of the present document take precedence.
The electromagnetic environment used in the present document to develop the technical specifications encompasses the
electromagnetic environment on-board ships as identified in CENELEC EN 60945 [i.3].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, E
...