ETSI EN 302 217-4 V2.2.1 (2025-07)

Draft ETSI EN 302 217-4 V2.2.0 (2025-04)

EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements
for point-to-point equipment and antennas;
Part 4: Antennas
2 Draft ETSI EN 302 217-4 V2.2.0 (2025-04)

Reference
REN/ATTM-0456
Keywords
antenna, DFRS, DRRS, FWA, point-to-point, radio,
regulation, transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 Draft ETSI EN 302 217-4 V2.2.0 (2025-04)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Introduction . 8
4.2 Templates for definition of Radiation Pattern Envelope (RPE) classes . 8
4.3 Environmental profile . 11
4.4 Radiation Pattern Envelope (RPE) . 11
4.4.1 Introduction. 11
4.4.2 Frequency range 0: 1 GHz to 3 GHz . 12
4.4.3 Frequency range 1: 3 GHz to 14 GHz . 16
4.4.4 Frequency range 2: 14 GHz to 20 GHz . 19
4.4.5 Frequency range 3: 20 GHz to 24 GHz . 21
4.4.6 Frequency range 4: 24 GHz to 30 GHz . 24
4.4.7 Frequency range 5: 30 GHz to 47 GHz . 26
4.4.8 Frequency range 6: 47 GHz to 71 GHz . 30
4.4.9 Frequency range 7: 71 GHz to 86 GHz . 32
4.4.10 Frequency range 8: 92 GHz to 114,25 GHz . 35
4.4.11 Frequency range 9: 130 GHz to 175,8 GHz . 36
4.5 Cross-Polar Discrimination (XPD) . 37
4.5.1 XPD categories . 37
4.5.2 XPD category 1 . 37
4.5.3 XPD categories 2 and 3 . 37
4.5.3.1 Frequency range 1 GHz to 3 GHz . 37
4.5.3.2 Frequency range 3 GHz to 174,8 GHz . 38
4.6 Antenna gain . 39
5 Testing for compliance with technical requirements . 40
5.1 Environmental conditions for testing . 40
5.2 General test prescription . 40
5.2.1 Wide radio-frequency band covering antennas specification and tests . 40
5.2.2 Self-alignment tracking antennas . 40
Annex A (informative): Additional information . 41
A.1 Mechanical characteristics . 41
A.1.1 Environmental characteristics . 41
A.1.2 Wind ratings . 41
A.1.3 Antenna stability . 41
A.2 Antenna port connectors . 41
A.3 Return loss at the port connectors . 42
A.3.1 Background . 42
A.3.2 Typical RL guidelines . 42
A.4 Inter-port isolation . 42
A.5 Antenna labelling . 42
ETSI
4 Draft ETSI EN 302 217-4 V2.2.0 (2025-04)
Annex B (informative): Antenna gain and radiation pattern information . 43
B.1 Impact of antenna gain on the frequency planning . 43
B.2 Typical Gain and Radiation Pattern for circular-symmetric antennas . 43
B.2.1 Introduction . 43
B.2.2 Gain . 44
B.2.3 Radiation pattern . 44
Annex C (informative): Change history . 45
History . 46

ETSI
5 Draft ETSI EN 302 217-4 V2.2.0 (2025-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™, LTE™ and 5G™ logo are trademarks of ETSI registered for the benefit of its Members and of the
3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of ®
the oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission
and Multiplexing (ATTM), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI EN
Approval Procedure.
The present document is part 4 of a multi-part deliverable covering the Fixed Radio Systems; Characteristics and
requirements for point-to-point equipment and antennas. Full details of the entire series can be found in ETSI
EN 302 217-1 [2].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3
...