EN IEC 60317-27-1:2020/A1:2024
(Amendment)Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-1: Runddrähte aus Kupfer, papierisoliert
Spécifications pour types particuliers de fils de bobinage - Partie 27-1 : Fil de section circulaire en cuivre recouvert de ruban papier
Specifikacije za posebne vrste navijalnih žic - 27-1. del: S papirnim trakom ovita okrogla bakrena žica - Dopolnilo A1 (IEC 60317-27-1:2020/AMD1:2024)
General Information
Relations
Overview
EN IEC 60317-27-1:2020/A1:2024 is an important European standard that specifies the requirements for a particular type of winding wire: paper tape covered round copper wire. Developed by the International Electrotechnical Commission (IEC) and adopted by the European Committee for Electrotechnical Standardization (CENELEC), this amendment (A1) to the original EN IEC 60317-27-1:2020 standard introduces updated specifications to ensure uniformity, safety, and quality in the production and use of this specialized copper winding wire.
This standard is critical for manufacturers and users of winding wires in electrotechnical applications, as it sets out precise technical parameters for the copper conductor and its paper tape insulation. The amendment reflects international consensus and provides clarity about packaging, labeling, and compliance, facilitating harmonization across European and international markets.
Key Topics
Paper Tape Covered Round Copper Wire
The standard focuses on round copper conductors insulated with paper tape, highlighting characteristics such as conductor diameter, type of paper insulation, and construction methods.Technical Specifications and Amendments
Amendment A1 (2024) introduces updated labeling requirements for packaging units, including manufacturer information, wire type and paper details, net mass, conductor diameter, paper layers, and manufacturing date to improve traceability and quality control.Compliance and Implementation Dates
The amendment was approved by CENELEC in November 2024, with mandatory implementation by national bodies by November 2025. Conflicting national standards must be withdrawn by November 2027 to ensure alignment.Standardization Process and Scope
Developed by IEC Technical Committee 55 (Winding Wires), this standard aids international cooperation by providing unified terminology and conformance criteria. It promotes transparency and consistency in electrotechnical manufacturing.
Applications
EN IEC 60317-27-1:2020/A1:2024 plays a vital role in industries where reliable copper winding wires are essential, such as:
Electric Motors and Generators
Ensuring high-quality insulated copper wires for motor windings to optimize performance and durability.Transformers and Inductors
Providing standardized copper wires that meet insulation and mechanical requirements critical for electromagnetic components.Electrical Equipment Manufacturing
Offering manufacturers explicit guidelines to produce and test winding wires used in various electrical and electronic devices.Quality Assurance and Supply Chain
Supporting traceability through detailed packaging and labeling standards that facilitate control across production, distribution, and usage phases.
Related Standards
IEC 60317 Series
EN IEC 60317-27-1 is part of the broader IEC 60317 series, which covers specifications for particular types of winding wires made from various materials and insulation types.Other Copper Product Standards
Related standards including those governing copper conductor dimensions, mechanical properties, and insulation materials assist in comprehensive wire manufacturing and testing processes.CENELEC Harmonized Standards
This amendment aligns with the CENELEC regulations and supports conformity assessment procedures within the European Union's electrical equipment directives.
Practical Value
Compliance with EN IEC 60317-27-1:2020/A1:2024 ensures:
- Consistency in Wire Quality through clear technical requirements and manufacturing controls.
- Enhanced Reliability and Safety for electrical equipment using paper tape covered copper winding wires.
- Global Market Alignment by adhering to harmonized standards, simplifying trade and certification across countries.
- Improved Traceability via standardized labeling and packaging, benefiting manufacturers, suppliers, and end-users.
For engineers, manufacturers, and quality managers, this standard provides essential guidance to produce, identify, and apply paper tape covered round copper wires meeting international quality benchmarks.
Keywords: EN IEC 60317-27-1:2020/A1:2024, paper tape covered copper wire, winding wires, copper conductor standards, electrotechnical standard, IEC winding wire specifications, CENELEC electrical standards, copper winding wire labeling
Frequently Asked Questions
EN IEC 60317-27-1:2020/A1:2024 is a amendment published by CLC. Its full title is "Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire". This standard covers: Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
EN IEC 60317-27-1:2020/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 60317-27-1:2020/A1:2024 has the following relationships with other standards: It is inter standard links to EN IEC 60317-27-1:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN IEC 60317-27-1:2020/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Specifikacije za posebne vrste navijalnih žic - 27-1. del: S papirnim trakom ovita
okrogla bakrena žica - Dopolnilo A1 (IEC 60317-27-1:2020/AMD1:2024)
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round
copper wire (IEC 60317-27-1:2020/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-1:
Runddrähte aus Kupfer, papierisoliert (IEC 60317-27-1:2020/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 27-1: Fil de section
circulaire en cuivre recouvert de ruban papier (IEC 60317-27-1:2020/AMD1:2024)
Ta slovenski standard je istoveten z: EN IEC 60317-27-1:2020/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60317-27-1:2020/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 27-1:
Paper tape covered round copper wire
(IEC 60317-27-1:2020/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 27-1 : Fil de section circulaire en cuivre recouvert de Wickeldrähten - Teil 27-1: Runddrähte aus Kupfer,
ruban papier papierisoliert
(IEC 60317-27-1:2020/AMD1:2024) (IEC 60317-27-1:2020/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 60317-27-1:2020; it was approved by CENELEC on 2024-11-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60317-27-1:2020/A1:2024 E
European foreword
The text of document 55/2053/FDIS, future edition 1 of IEC 60317-27-1/AMD1, prepared by TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-11-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-27-1:2020/AMD1:2024 was approved by CENELEC
as a European Standard without any modification.
IEC 60317-27-1 ®
Edition 1.0 2024-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –
Part 27-1: Paper tape covered round copper wire
Spécifications pour types particuliers de fils de bobinage –
Partie 27-1: Fil de section circulaire en cuivre recouvert de ruban papier
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-9810-7
----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...