EN IEC 62561-6:2018

SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST EN 62561-6:2011
(OHPHQWL]D]DãþLWRSUHGVWUHOR/36&GHO=DKWHYH]DãWHYFHXGDURYVWUHOH
/6&
Lightning Protection System Components (LPSC) - Part 6: Requirements for Lightning
Strike and Surge Counters (LSC)
Ta slovenski standard je istoveten z: EN IEC 62561-6:2018
ICS:
91.120.40 =DãþLWDSUHGVWUHOR Lightning protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62561-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2018
ICS 29.020; 91.120.40 Supersedes EN 62561-6:2011
English Version
Lightning protection system components (LPSC) - Part 6:
Requirements for lightning strike counters (LSC)
(IEC 62561-6:2018)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen
(CSPF) - Partie 6: Exigences pour les compteurs de coups an Blitzzähler (LSC)
de foudre (LSC) (IEC 62561-6:2018)
(IEC 62561-6:2018)
This European Standard was approved by CENELEC on 2018-03-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62561-6:2018 E

European foreword
The text of document 81/575/FDIS, future edition 2 of IEC 62561-6, prepared by IEC/TC 81 "Lightning
protection" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2018-12-01
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-01-01
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62561-6:2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62561-6:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60060-1 NOTE Harmonized as EN 60060-1.
IEC 61000-6-2 NOTE Harmonized as EN 61000-6-2.
IEC 61180-1 NOTE Harmonized as EN 61180-1.
IEC 62305-1:2010 NOTE Harmonized as EN 62305-1:2011 (modified).
IEC 62475 NOTE Harmonized as EN 62475.
ISO 4892-2 NOTE Harmonized as EN ISO 4892-2.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-52 1996 Environmental testing -- Part 2-52: Tests - EN 60068-2-52 1996
Test Kb: Salt mist, cyclic (sodium chloride
solution)
IEC 60068-2-75 1997 Environmental testing -- Part 2-75: Tests - EN 60068-2-75 1997
Test Eh: Hammer tests
IEC 60529 -  Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 61000-6-4 -  Electromagnetic compatibility (EMC) – Part EN 61000-6-4 -
6-4: Generic standards – Emission
standard for industrial environments
ISO 6988 1985 Metallic and other non-organic coatings - EN ISO 6988 1994
Sulfur dioxide test with general
condensation of moisture
IEC 62561-6 ®
Edition 2.0 2018-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lightning protection system components (LPSC) –

Part 6: Requirements for lightning strike counters (LSC)

Composants des systèmes de protection contre la foudre (CSPF) –

Partie 6: Exigences pour les compteurs de coups de foudre (LSC)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020; 91.120.40 ISBN 978-2-8322-5248-2

– 2 – IEC 62561-6:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Classification . 9
5 Requirements . 9
5.1 General . 9
5.2 Documentation . 9
5.3 Marking . 9
5.4 Design . 10
6 Tests . 10
6.1 General test conditions . 10
6.1.1 General . 10
6.1.2 Impulse discharge current count for LSCs Type I . 11
6.1.3 Nominal discharge current count for LSCs Type II . 12
6.2 UV (Ultraviolet) light resistance . 13
6.2.1 General . 13
6.2.2 Pass criteria . 13
6.3 Resistance tests to corrosion (for metallic parts) . 13
6.4 Mechanical tests . 13
6.5 Index of protection confirmation (IP Code) . 15
6.6 Electrical tests . 15
6.6.1 General conditions for tests . 15
6.6.2 Minimum discharge current counting test I . 15
imp min
6.6.3 Threshold current test . 16
6.6.4 Maximum current counting test . 16
6.6.5 Performance verification test . 17
6.6.6 Multi pulse test . 17
6.7 Marking test . 17
7 Electromagnetic compatibility (EMC) . 18
7.1 Electromagnetic immunity . 18
7.2 Electromagnetic emission . 18
8 Structure and content of the test report . 18
8.1 General . 18
8.2 Report identification . 18
8.3 Specimen description . 19
8.4 Standards and references . 19
8.5 Test procedure . 19
8.6 Testing equipment description . 19
8.7 Measuring instruments description . 19
8.8 Results and parameters recorded . 19
8.9 Statement of pass/fail . 19
Annex A (normative) Resistance to ultraviolet light . 20
A.1 General . 20
A.2 Test . 20

IEC 62561-6:2018 © IEC 2018 – 3 –
A.3 First alternative test to Clause A.2 . 20
A.4 Second alternative test to Clause A.2 . 20
Annex B (normative) Conditioning/ageing for LSCs . 21
B.1 General . 21
B.2 Salt mist test . 21
B.3 Humid sulphurous atmosphere test . 21
B.4 Ammonia atmosphere treatment. 21
Annex C (normative) Flow chart for testing LSC . 22
Bibliography . 23

Figure 1 – Pendulum hammer test apparatus . 14
Figure C.1 – Flow chart for testing of LSC . 22

Table 1 – Preferred parameters for impulse discharge currents counted (I ) . 12
imp
Table 2 – Preferred parameters for nominal discharge currents counted (I ) . 12
n
– 4 – IEC 62561-6:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) –

Part 6: Requirements for lightning strike counters (LSC)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other ac
...