EN 60317-58:2010/A1:2024
(Amendment)Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 58: Flachdrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220
Spécifications pour types particuliers de fils de bobinage - Partie 58: Fil de section rectangulaire en cuivre émaillé avec polyamide-imide, classe 220
Specifikacije za posebne vrste navijalnih žic - 58. del: S poliesterimidom emajliran bakren vodnik pravokotnega prereza, razred 220 - Dopolnilo A1 (IEC 60317-58:2010/AMD1:2024)
General Information
Relations
Overview
EN 60317-58:2010/A1:2024 is a European standard published by CLC that specifies the requirements for polyamide-imide enamelled rectangular copper wire, classified as class 220. This amendment updates the 2010 edition, aligning with the international IEC 60317-58:2010/AMD1:2024 standard. The document is essential for manufacturers and users of specialized winding wires applied in electrotechnical and electronic devices. It ensures consistent quality, performance, and safety of copper winding wires coated with polyamide-imide enamel.
This standard forms part of the broader IEC 60317 series, which governs specifications for various types of winding wires, providing critical technical guidance for industry compliance and interoperability.
Key Topics
- Material Specification: Defines the use of rectangular copper wire enamelled with polyamide-imide, a high-performance insulating material known for thermal and mechanical robustness.
- Class 220 Rating: Denotes the thermal endurance and temperature index, indicating suitability for applications requiring resistance to elevated temperatures up to 220 °C.
- Test Methods: Incorporates updated test procedures referencing IEC 60317-0-2:2020, including electrical resistance, elongation, springiness, flexibility, heat shock at 240 °C, breakdown voltage at 220 °C, and solvent resistance.
- Dimensional and Electrical Requirements: Adheres to defined dimensions, electrical resistance, and mechanical attributes such as flexibility and adherence for winding wire uniformity and reliability.
- Packaging and Compliance: Packaging guidelines are standardized to ensure protection during transport and storage while maintaining product integrity. National committees are responsible for implementation by April 2025, with conflicting standards to be withdrawn by July 2027.
Applications
This standard applies primarily to winding wires used in electrical machines, transformers, and other components where reliable insulation and thermal stability are critical. Typical applications include:
- Electric motors: Ensuring reliable coil insulation under high temperature and mechanical stress.
- Transformers: Enhancing performance and lifespan with enamel coatings resistant to heat and electrical breakdown.
- Generators: Winding wires designed to sustain rigorous operational cycles at elevated temperatures.
- Electromechanical devices: Offering specialized insulation suitable for rectangular wire shapes to optimize space and electrical performance.
Implementing EN 60317-58:2010/A1:2024 ensures manufacturers produce winding wires that meet international and European quality benchmarks, reducing failure risks and improving end-product durability.
Related Standards
- IEC 60317 Series: A comprehensive set of standards covering different types and specifications of winding wires across various insulation materials and shapes.
- IEC 60317-0-2:2020: General requirements and test methods for enamelled rectangular copper wire, referenced for detailed testing protocols in this amendment.
- EN 60317 Series: Harmonized European counterparts of the IEC standards, facilitating compliance within the EU and CENELEC member countries.
These related standards collectively provide a framework for quality assurance, performance testing, and certification of winding wires globally. Adherence supports industrial interoperability and market access.
Keywords: EN 60317-58, polyamide-imide enamelled copper wire, winding wire specifications, class 220 wire, rectangular copper wire, electrical winding wire standard, IEC 60317-58 amendment, copper wire insulation, high temperature winding wire, electrotechnical standard.
Frequently Asked Questions
EN 60317-58:2010/A1:2024 is a amendment published by CLC. Its full title is "Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220". This standard covers: Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
EN 60317-58:2010/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60317-58:2010/A1:2024 has the following relationships with other standards: It is inter standard links to EN 60317-58:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60317-58:2010/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Specifikacije za posebne vrste navijalnih žic - 58. del: S poliesterimidom emajliran
bakren vodnik pravokotnega prereza, razred 220 - Dopolnilo A1 (IEC 60317-
58:2010/AMD1:2024)
Specifications for particular types of winding wires - Part 58: Polyamide-imide enameled
rectangular copper wire, class 220 (IEC 60317-58:2010/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 58:
Flachdrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220 (IEC 60317-
58:2010/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 58: Fil de section
rectangulaire en cuivre émaillé avec polyamide-imide, classe 220 (IEC 60317-
58:2010/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-58:2010/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60317-58:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 58:
Polyamide-imide enamelled rectangular copper wire, class 220
(IEC 60317-58:2010/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 58: Fil de section rectangulaire en cuivre émaillé Wickeldrähten - Teil 58: Flachdrähte aus Kupfer, lackisoliert
avec polyamide-imide, classe 220 mit Polyamidimid, Klasse 220
(IEC 60317-58:2010/AMD1:2024) (IEC 60317-58:2010/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-58:2010; it was approved by CENELEC on 2024-07-23. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-58:2010/A1:2024 E
European foreword
The text of document 55/1996/CDV, future IEC 60317-58/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
58:2010/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-23
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-58:2010/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-2 2020 Specifications for particular types of EN IEC 60317-0-2 2020
winding wires - Part 0-2: General
requirements - Enamelled rectangular
copper wire
IEC 60317-58 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –
Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
Spécifications pour types particuliers de fils de bobinage –
Partie 58: Fil de section rectangulaire en cuivre émaillé avec polyamide-imide,
classe 220
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-9042-2
– 2 – IEC 60317-58:2010/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...