Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

This part of IEC 60684 gives the requirements for heat-shrinkable, polyolefin sleeving, antitracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm. These sleevings are normally supplied in the colours red or brown. Since these types of sleevings cover a significantly large range of sizes and wall thicknesses, Table A.1 in this standard provides guidance on the range of sizes available. The actual size shall be agreed between the user and the supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance must be proven as part of the assembly. Examples of this are described in HD 629 and IEC 60502 series.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 280: Polyolefin-Wärmeschrumpfschläuche, kriechstromfest

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 280: Gaines thermorétractables, en polyoléfine, anti-cheminement

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 280. list: Toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami - Dopolnilo A1 (IEC 60684-3-280:2010/A1:2013)

Ta del IEC 60684 podaja zahteve za toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami z nazivnim razmerjem krčenja 3:1. Za te cevi je ugotovljeno, da so primerne za uporabo pri temperaturah do 100 °C. Običajno za: srednje debelo steno z notranjim premerom do 110 mm. Te cevi se običajno dobavljajo v rdeči in rjavi barvi. Ker te vrste cevi zajemajo precej velik razpon velikosti in debelin stene, podaja preglednica A.1. v tem standardu vodilo o razponu razpoložljivih velikosti. Dejanska velikost se dogovori med uporabnikom in dobaviteljem. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri takšni uporabi in ne le na podlagi same specifikacije. Ta cevi so zasnovane za uporabo v kabelskih dodatkih srednje napetosti, zato mora biti dokazana njihova električna zmogljivost, kadar so del sklopa. Primeri tega so opisani v HD 629 in seriji IEC 60502.

General Information

Status
Withdrawn
Publication Date
03-Apr-2014
Withdrawal Date
15-Jan-2017
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Sep-2022
Completion Date
24-Sep-2022

Relations

Buy Standard

Amendment
EN 60684-3-280:2010/A1:2014
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2014
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHWLSHFHYLOLVW
7RSORWQRVNUþOMLYHSROLROHILQVNHFHYL]D]DãþLWRSUHGSRãNRGEDPL'RSROQLOR$
,(&$
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
280: Heat-shrinkable, polyolefin sleeving, anti-tracking
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 280:
Polyolefin-Wärmeschrumpfschläuche, kriechstromfest
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuille 280: Gaines thermorétractables, en polyoléfine, anti-cheminement
Ta slovenski standard je istoveten z: EN 60684-3-280:2010/A1:2014
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60684-3-280/A1
NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM
ICS 29.035.20
English version
Flexible insulating sleeving -
Part 3: Specifications for individual types of sleeving -
Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
(IEC 60684-3-280:2010/A1:2013)

Gaines isolantes souples -  Isolierschläuche -
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines - Schlauchtypen -
Feuille 280: Gaines thermorétractables, Blatt 280: Polyolefin-
en polyoléfine, anti-cheminement Wärmeschrumpfschläuche,
(CEI 60684-3-280:2010/A1:2013) kriechstromfest
(IEC 60684-3-280:2010/A1:2013)

This amendment A1 modifies the European Standard EN 60684-3-280:2010; it was approved by CENELEC on
2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-280:2010/A1:2014 E

Foreword
The text of document 15/686/CDV, future IEC 60684-3-280:2010/A1, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60684-3-280:2010/A1:2014.

The following dates are fixed:
(dop) 2014-10-16
• latest date by which the document ha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.