EN 61300-2-2:2009

SLOVENSKI STANDARD
01-maj-2009
1DGRPHãþD
SIST EN 61300-2-2:2004
3RYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLKYODNHQ3RVWRSNL
RVQRYQHJDSUHVNXãDQMDLQPHUMHQMDGHO3UHVNXVL0HKDQLþQRWUDMDQMH,(&

Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-2: Tests - Mating durability (IEC 61300-2-2:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-2: Prüfungen - Mechanische Lebensdauer (IEC 61300-2-2:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-2: Essais - Durabilité de l'accouplement
(CEI 61300-2-2:2009)
Ta slovenski standard je istoveten z: EN 61300-2-2:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-2
NORME EUROPÉENNE
March 2009
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-2:2003

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-2: Tests -
Mating durability
(IEC 61300-2-2:2009)
Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales und passive Bauteile -
d'essais et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-2: Essais - Teil 2-2: Prüfungen -
Durabilité de l'accouplement Mechanische Lebensdauer
(CEI 61300-2-2:2009) (IEC 61300-2-2:2009)

This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-2:2009 E
Foreword
The text of document 86B/2772/FDIS, future edition 3 of IEC 61300-2-2, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-2 on 2009-02-01.
This European Standard supersedes EN 61300-2-2:2003.
Specific technical changes from EN 61300-2-2:2003 include a mating durability test for a plug-socket
configuration, a new measurement condition and a new severity level.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-2:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-1 NOTE  Harmonized as EN 61300-1:2003 (not modified).
__________
- 3 - EN 61300-2-2:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
1) 3)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 200X
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
1) 2)
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 2001
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
1)
Undated reference.
2)
Valid edition at date of issue.
3)
To be ratified.
IEC 61300-2-2
Edition 3.0 2009-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-2: Tests – Mating durability

Dispositifs d'interconnexion et composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 2-2: Essais – Durabilité de l'accouplement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
J
CODE PRIX
ICS 33.180.20 ISBN 2-8318-1023-4
– 2 – 61300-2-2 © IEC:2009
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 General description .5
4 Apparatus.5
4.1 Fixturing.5
4.2 Force applicator .5
4.3 Measuring equipment .6
5 Procedure .6
5.1 Initial inspection .6
5.2 Cycling .6
5.3 Measurements.6
5.3.1 General remark .6
5.3.2 Measurement condition A .7
5.3.3 Measurement condition B .7
5.3.4 Post test examination .7
6 Severity.8
7 Details to be specified .8
Bibliography.9

Figure 1 – Mating durability test for a plug-adaptor-plug configuration .6
Figure 2 – Mating durability test for a plug-socket configuration .6

Table 1 – Severity level .8

61300-2-2 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-2: Tests – Mating durability

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental
...