EN 61300-2-40:2000

SLOVENSKI STANDARD
01-september-2002
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-40: Tests - Screen testing of attenuation of
single-mode tuned angled optical connectors (IEC 61300-2-40:2000)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-40: Tests - Screen testing of attenuation of single-
mode tuned angled optical connectors
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren -- Teil 2-40: Prüfungen - Sortierprüfverfahren für die Dämpfung von
abgestimmten schräg angeschliffenen Einmoden-LWL-Steckverbindern
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-40: Essais - Tri par mesure de
l'affaiblissement des connecteurs pour fibres optiques monomodales angulaires de type
accordé
Ta slovenski standard je istoveten z: EN 61300-2-40:2000
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61300-2-40
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2000

ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures
Part 2-40: Tests - Screen testing of attenuation of
single-mode tuned angled optical connectors
(IEC 61300-2-40:2000)
Dispositifs d'interconnexion et composants Lichtwellenleiter - Verbindungselemente
passifs à fibres optiques - Méthodes und passive Bauteile -
fondamentales d'essais et de mesures Grundlegende Prüf- und Messverfahren
Partie 2-40: Essais – Tri par mesure de Teil 2-40: Prüfungen - Sortierprüfverfahren
l'affaiblissement des connecteurs pour für die Dämpfung von abgestimmten
fibres optiques monomodales angulaires schräg angeschliffenen Einmoden-LWL-
de type accordé Steckverbindern
(CEI 61300-2-40:2000) (IEC 61300-2-40:2000)

This European Standard was approved by CENELEC on 2000-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-2-40:2000 E
Page 2
Foreword
The text of document 86B/1325/FDIS, future edition 1 of IEC 61300-2-40, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-40 on 2000-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-11-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-40:2000 was approved by CENELEC as a European
Standard without any modification.
__________
Page 3
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61300-3-4 1998 Fibre optic interconnecting devices and EN 61300-3-4 1998
passive components - Basic test and
measurement procedures
Part 3-4: Examination and measurements -
Attenuation
NORME
CEI
INTERNATIONALE IEC
61300-2-40
INTERNATIONAL
Première édition
STANDARD
First edition
2000-07
Dispositifs d'interconnexion
et composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 2-40:
Essais – Tri par mesure de l'affaiblissement des
connecteurs pour fibres optiques monomodales
angulaires de type accordé
Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 2-40:
Tests – Screen testing of attenuation of single-
mode tuned angled optical connectors
© IEC 2000 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
H
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61300-2-40 © IEC:2000 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 General. 9
1.1 Scope and object . 9
1.2 General description . 9
1.3 Normative references. 9
1.4 Adjusting sector . 9
2 Apparatus .13
2.1 Optical source (S) . 13
2.2 Excitation unit (E). 13
2.3 Detector (D) . 13
2.4 Temporary joints (TJ) . 13
2.5 Screen plug for tuned connector (SP) . 13
2.6 Reference adaptor (RA) . 13
3 Procedure .13
4 Details to be specified . 15

61300-2-40 © IEC:2000 – 5 –
INTERNATIONAL ELECTROTECHNICAL
...