EN 60317-72:2017

SLOVENSKI STANDARD
01-oktober-2017
Specifikacije za posebne vrste navijalnih žic - 72. del: Bakrena žica z okroglim
prerezom, ovita s poliesterskim steklenim vlaknom in impregnirana s silikonsko
smolo ali lakom, gola ali emajlirana, temperaturni indeks 200 (IEC 60317-72:2017)
Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound
silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature
index 200 (IEC 60317-72:2017)
Ta slovenski standard je istoveten z: EN 60317-72:2017
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-72

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2017
ICS 29.060.10
English Version
Specifications for particular types of winding wires -
Part 72: Polyester glass-fibre wound fused, silicone resin or
varnish impregnated, bare or enamelled round copper wire,
temperature index 200
(IEC 60317-72:2017)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 72: Fil de section circulaire en cuivre nu ou émaillé, Wickeldrähten - Teil 72: Mit Polyesterglasfaser umwickelter,
guipé de fibres de verre polyester fondues, imprégnées de unbehandelter und eingegossener, mit Harz oder Lack
vernis ou de résine silicone, d'indice de température 200 imprägnierter blanker oder lackisolierter Runddraht aus
(IEC 60317-72:2017) Kupfer der Klasse 200
(IEC 60317-72:2017)
This European Standard was approved by CENELEC on 2017-06-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-72:2017 E
European foreword
The text of document 55/1604/FDIS, future edition 1 of IEC 60317-72, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-03-13
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-06-13
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60317-72:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 NOTE Harmonized in EN 60264 series.
IEC 60317 NOTE Harmonized in EN 60317 series.
IEC 60851 NOTE Harmonized in EN 60851 series.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60317-0-10 2017 Specifications for particular types of EN 60317-0-10 2017
winding wires - Part 0-10: General
requirements - Polyester glass-fibre
wound fused, unvarnished, or resin or
varnish impregnated, bare or enamelled
round copper wire
IEC 60317-72 ®
Edition 1.0 2017-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –

Part 72: Polyester glass-fibre wound fused, silicone resin or varnish

impregnated, bare or enamelled round copper wire, temperature index 200

Spécifications pour types particuliers de fils de bobinage –

Partie 72: Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de

verre polyester fondues, imprégnées de vernis ou de résine silicone, d’indice

de température 200
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-4265-0

– 2 – IEC 60317-72:2017  IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 6
3.2.1 Methods of test . 6
3.2.2 Winding wire . 6
3.3 Appearance . 7
4 Dimensions. 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
10 Cut-through . 7
11 Resistance to abrasion . 8
12 Resistance to solvents . 8
13 Breakdown voltage . 8
14 Continuity of insulation . 8
15 Temperature index . 8
16 Resistance to refrigerants . 8
17 Solderability . 8
18 Heat or solvent bonding . 8
19 Dielectric dissipation factor . 8
20 Resistance to transformer oil . 8
21 Loss of mass . 8
23 Pin hole test . 8
30 Packaging .
...