EN IEC 61753-1:2018
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
NEW!IEC 61753-1:2018 is available as IEC 61753-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61753-1:2018 provides guidance for the drafting of performance standards for all passive fibre optic products. This document defines the tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific. Test and severity details are given in Annex A. This second edition cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) definitions updated with new products: wall outlets, wall or pole mounted boxes, splices, ODF modules, street cabinets, hardened connectors and field mountable connectors; b) categories U and O are replaced by categories OP and OP+. No mandatory sequence in category OP+. Category OP+ contains the tests from category OP with the addition of only 4 other tests; c) addition of Category I (Industrial); d) temperature ranges added (with the HD suffix to the categories C, OP, OP+ and I) in case passive optical components are placed in a housing together with active electronics (HD stands for “heat dissipation”); e) the height of category A changed from 3 m to ground level (0 m); f) the lower level height of category G environment changed from ground level (0 m) to –1 m below ground level. Upper level remains at 3 m above ground level; g) addition of performance tests, test severities and performance criteria for new products: Wall outlet, wall or pole mounted boxes, mechanical splices, fusion splice protectors, ODF modules, street cabinets, field mountable connectors and hardened optical connectors; h) test severity of "Mating durability" test for connectors in categories C, OP ,OP+ and I is reduced to 200 cycles for connectors with cylindrical ferrules and 50 cycles for connectors with rectangular ferrules; i) test severity of "Change of temperature" test for connectors and passive optical components in category I is reduced from 20 cycles to 12 cycles (harmonized with connectors and components from other categories); j) test severity of "Flexing of strain relief" test for connectors in categories C, OP and OP+ is reduced to 50 cycles; k) test severities of "Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures" test for all enclosures is reduced to 5 cycles; l) test severities of "Change of temperature" test for all protective housings in categories C, A, G and S is reduced from 20 cycles to 12 cycles (harmonized with connectors and components); m) test severities of "Resistance to solvents and contaminating fluids" test for closures in categories G and S changed – kerosene is removed, diesel oil exposure reduced to 1 h immersion and 24 h drying at room temperature; n) sealing performance criteria of sealed closures for categories G and A are reduced to 20 kPa overpressure. o) the change in attenuation criterion for connectors has changed from peak-to-peak into a +/- deviation from the original value of the transmitted power at the start of the test (harmonized with the change in attenuation criterion
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 1: Allgemeines und Leitfaden
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 1: Généralités et recommandations
NEW!IEC 61753-1:2018 est disponible sous forme de IEC 61753-1:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61753-1:2018 fournit des recommandations pour la rédaction de normes de qualité de fonctionnement applicables à tous les produits passifs fibroniques. Le présent document définit les essais et les sévérités qui constituent les catégories de qualité de fonctionnement ou les environnements de service ou de fonctionnement général et elle identifie les essais qui sont considérés comme spécifiques à un produit. Les informations détaillées concernant les essais et les sévérités sont données à l’Annexe A. Cette deuxième édition annule et remplace la première édition parue en 2007. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) définitions mises à jour avec de nouveaux produits: prises murales, coffrets à montage mural ou sur poteau, épissures, modules ODF, armoires d’environnement urbain, connecteurs renforcés et connexions montables sur le terrain; b) les catégories U et O ont été remplacées par les catégories OP et OP+. Pas de séquence obligatoire dans la catégorie OP+. La catégorie OP+ contient les essais de la catégorie OP avec l’ajout de seulement 4 autres essais; c) ajout de la catégorie I (industriel); d) ajout des plages de température (avec le suffixe HD aux catégories C, OP, OP+ et I) au cas où des composants optiques passifs sont placés dans un boîtier avec des composants électroniques actifs (HD signifie Heat Dissipation, dissipation thermique); e) la hauteur de la catégorie A a été modifiée de 3 m au niveau du sol (0 m); f) la hauteur du niveau inférieur de l’environnement de catégorie G a été modifiée du niveau du sol (0 m) à –1 m en dessous du niveau du sol. Le niveau supérieur reste à 3 m au-dessus du niveau du sol; g) ajout d’essais de performance, de sévérités d’essai et de critères de qualité de fonctionnement pour de nouveaux produits: prises murales, coffrets à montage mural ou sur poteau, épissures mécaniques, protecteurs d’épissures par fusion, modules ODF, armoires d’environnement urbain, connexions montables sur le terrain et connecteurs optiques renforcés; h) la sévérité de l’essai «Durabilité de l’accouplement» pour les connecteurs des catégories C, OP, OP+ et I a été ramenée à 200 cycles pour les connecteurs avec férules cylindriques et à 50 cycles pour les connecteurs avec férules rectangulaires; i) la sévérité de l’essai «Variations de température» pour les connecteurs et les composants optiques passifs de la catégorie I a été ramenée de 20 cycles à 12 cycles (harmonisée avec les connecteurs et les composants d’autres catégories); j) la sévérité de l’essai «Flexion du serre-câble» pour les connecteurs des catégories C, OP et OP+ a été ramenée à 50 cycles; k) les sévérités de l’essai «Montage et démontage des épissures mécaniques fibroniques, des systèmes de gestion des fibres et des boîtiers» pour tous les boîtiers ont été ramenées à 5 cycles; l) les sévérités de l’essai «Variations de température» pour tous les boîtiers de protection des catégories C, A, G et S ont été ramenées de 20 cycles à 12 cycles (harmonisées avec les connecteurs et les composants); m) les sévérités de l’essai «Résistance aux solvants et aux fluides contaminants» pour les b
Optični spojni elementi in pasivne komponente - Tehnični standardi - 1. del: Splošno in smernice (IEC 61753-1:2018)
Ta del standarda IEC 61753 podaja smernice za pripravljanje osnutkov tehničnih standardov za vse pasivne optične izdelke.
Ta dokument opredeljuje preskuse in stopnje zahtevnosti, ki sestavljajo kategorije učinkovitosti ali splošna operativna storitvena okolja, ter določa preskuse, ki so namenjeni posameznim proizvodom. Podrobnosti o preskusih in stopnjah zahtevnosti so navedene v dodatku A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2019
1DGRPHãþD
SIST EN 61753-1:2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGLGHO
6SORãQRLQVPHUQLFH ,(&
Fibre optic interconnecting devices and passive components - Performance standards -
Part 1: General and guidance (IEC 61753-1:2018)
,]YHGEHQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO 6SORãQR
LQQDYRGLOD]DL]YHGEHQHVWDQGDUGH ,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 1: General and guidance for performance standards (IEC 61753-1:2018)
Ta slovenski standard je istoveten z: EN IEC 61753-1:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61753-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 33.180.20 Supersedes EN 61753-1:2007
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 1: General and guidance
(IEC 61753-1:2018)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 1: Généralités Bauteile - Betriebsverhalten - Teil 1: Allgemeines und
et recommandations Leitfaden
(IEC 61753-1:2018) (IEC 61753-1:2018)
This European Standard was approved by CENELEC on 2018-09-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-1:2018 E
European foreword
The text of document 86B/4131/FDIS, future edition 2 of IEC 61753-1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-1:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-06-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2019-09-19
document have to be withdrawn
This document supersedes EN 61753-1:2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61753-1:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60721-2-1 NOTE Harmonized as EN 60721-2-1
IEC 61753 (series) NOTE Harmonized as EN 61753 (series)
IEC 62005 (series) NOTE Harmonized as EN IEC 62005 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60529 - Degrees of protection provided by enclosures (IP - -
Code)
IEC 61300 series Fibre optic interconnecting devices and passive - -
components - Basic test and measurement
procedures
IEC 61300-2-1 - Fibre optic interconnecting devices and passive EN 61300-2-1 -
components - Basic test and measurement
procedures - Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-2 - Fibre optic interconnecting devices and passive EN 61300-2-2 -
components - Basic test and measurement
procedures - Part 2-2: Tests - Mating durability
IEC 61300-2-4 - Fibre optic interconnecting devices and passive EN 61300-2-4 -
components - Basic test and measurement
procedures - Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and passive EN 61300-2-5 -
components - Basic test and measurement
procedures - Part 2-5: Tests - Torsion
IEC 61300-2-6 - Fibre optic interconnecting devices and passive EN 61300-2-6 -
components - Basic test and measurement
procedures - Part 2-6: Tests - Tensile strength of
coupling mechanism
IEC 61300-2-7 - Fibre optic interconnecting devices and passive EN 61300-2-7 -
components - Basic test and measurement
procedures - Part 2-7: Tests - Bending moment
Fibre optic interconnecting devices and passive
IEC 61300-2-9 - EN 61300-2-9 -
components - Basic test and measurement
procedures - Part 2-9: Tests - Shock
IEC 61300-2-10 - Fibre optic interconnecting devices and passive EN 61300-2-10 -
components - Basic test and measurement
procedures - Part 2-10: Tests - Crush resistance
IEC 61300-2-11 - Fibre optic interconnecting devices and passive EN 61300-2-11 -
components - Basic test and measurement
procedures - Part 2-11: Tests - Axial compression
IEC 61300-2-12 - Fibre optic interconnecting devices and passive EN 61300-2-12 -
components - Basic test and measurement
procedures - Part 2-12: Tests - Impact
IEC 61300-2-17 - Fibre optic interconnecting devices and passive EN 61300-2-17 -
components - Basic test and measurement
procedures - Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and passive EN 61300-2-18 -
components - Basic test and measurement
procedures - Part 2-18: Tests - Dry heat - High
temperature endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and passive EN 61300-2-19 -
components - Basic test and measurement
procedures - Part 2-19: Tests - Damp heat (steady
state)
IEC 61300-2-21 - Fibre optic interconnecting devices and passive EN 61300-2-21 -
components - Basic test and measurement
procedures - Part 2-21: Tests - Composite
temperature/humidity cyclic test
IEC 61300-2-22 - Fibre optic interconnecting devices and passive EN 61300-2-22 -
components - Basic test and measurement
procedures - Part 2-22: Tests - Change of
temperature
IEC 61300-2-23 - Fibre optic interconnecting devices and passive EN 61300-2-23 -
components - Basic test and measurement
procedures - Part 2-23: Tests - Sealing for non-
pressurized closures of fibre optic devices
IEC 61300-2-26 - Fibre optic interconnecting devices and passive EN 61300-2-26 -
components - Basic test and measurement
procedures - Part 2-26: Tests - Salt mist
IEC 61300-2-27 - Fibre optic interconnecting devices and passive EN 61300-2-27 -
components - Basic test and measurement
procedures - Part 2-27: Tests - Dust - Laminar flow
IEC 61300-2-28 - Fibre optic interconnecting devices and passive EN 61300-2-28 -
components - Basic test and measurement
procedures - Part 2-28: Tests - Corrosive
atmosphere (sulphur dioxide)
IEC 61300-2-33 - Fibre optic interconnecting devices and passive EN 61300-2-33 -
components - Basic test and measurement
procedures - Part 2-33: Tests - Assembly and
disassembly of fibre optic mechanical splices, fibre
management systems and closures
IEC 61300-2-34 - Fibre optic interconnecting devices and passive EN 61300-2-34 -
components - Basic test and measurement
procedures - Part 2-34: Tests - Resistance to
solvents and contaminating fluids of interconnecting
components and closures
IEC 61300-2-35 - Fibre optic interconnecting devices and passive EN 61300-2-35 -
components - Basic test and measurement
procedures - Part 2-35: Tests - Cable nutation
IEC 61300-2-37 - Fibre optic interconnecting devices and passive EN 61300-2-37 -
components - Basic test and measurement
procedures - Part 2-37: Tests - Cable bending for
fibre optic closures
IEC 61300-2-38 - Fibre optic interconnecting devices and passive EN 61300-2-38 -
components - Basic test and measurement
procedures - Part 2-38: Tests - Sealing for
pressurized fibre optic closures
IEC 61300-2-42 - Fibre optic interconnecting devices and passive EN 61300-2-42 -
components - Basic test and measurement
procedures - Part 2-42: Tests - Static side load for
strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and passive EN 61300-2-44 -
components - Basic test and measurement
procedures - Part 2-44: Tests - Flexing of the strain
relief of fibre optic devices
IEC 61300-2-45 - Fibre optic interconnecting devices and passive EN 61300-2-45 -
components - Basic test and measurement
procedures - Part 2-45: Tests - Durability test by
water immersion
IEC 61300-2-46 - Fibre optic interconnecting devices and passive EN 61300-2-46 -
components - Basic test and measurement
procedures - Part 2-46: Tests - Damp heat, cyclic
IEC 61300-2-50 - Fibre optic interconnecting devices and passive EN 61300-2-50 -
components - Basic test and measurement
procedures - Part 2-50: Tests - Fibre optic
connector proof test with static load - Singlemode
and multimode
IEC 61300-3-3 - Fibre optic interconnecting devices and passive EN 61300-3-3 -
components - Basic test and measurement
procedures - Part 3-3: Examinations and
measurements - Active monitoring of changes in
attenuation and return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and passive EN 61300-3-4 -
components - Basic test and measurement
procedures - Part 3-4: Examinations and
measurements - Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and passive EN 61300-3-6 -
components - Basic test and measurement
procedures - Part 3-6: Examinations and
measurements - Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and passive EN 61300-3-7 -
components - Basic test and measurement
procedures - Part 3-7: Examinations and
measurements - Wavelength dependence of
attenuation and return loss of single mode
components
IEC 61300-3-28 - Fibre optic interconnecting devices and passive EN 61300-3-28 -
components - Basic test and measurement
procedures - Part 3-28: Examinations and
measurements - Transient loss
IEC 61300-3-29 - Fibre optic interconnecting devices and passive EN 61300-3-29 -
components - Basic test and measurement
procedures - Part 3-29: Examinations and
measurements - Spectral transfer characteristics of
DWDM devices
IEC 61300-3-34 - Fibre optic interconnecting devices and passive EN 61300-3-34 -
components - Basic test and measurement
procedures - Part 3-34: Examinations and
measurements - Attenuation of random mated
connectors
IEC 61300-3-45 - Fibre optic interconnecting devices and passive EN 61300-3-45 -
components - Basic test and measurement
procedures - Part 3-45: Examinations and
measurements - Attenuation of random mated multi-
fibre connectors
IEC Guide 109 - Environmental aspects - Inclusion in - -
electrotechnical product standards
ISO 1998-1 1998 Petroleum industry - Terminology - Part 1: Raw - -
materials and products
IEC 61753-1 ®
Edition 2.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance
Dispositifs d'interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 1: Généralités et recommandations
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-5923-8
– 2 – IEC 61753-1:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.