EN 60684-3-247:2011/A1:2017
(Amendment)Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
IEC 60684-3-247:2011 gives the requirements for two types of heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. - Type A: Medium wall, internal diameter up to 200,0 mm typically; and Type B: Thick wall, internal diameter up to 200,0 mm typically.
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 247: Wärmeschrumpfende Polyolefinschläuche mit Innenbeschichtung, nicht flammhemmend, dickwandig und mittlere Wanddicke
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 247: Gaines thermorétractables en polyoléfine, à double paroi (épaisse et moyenne), non retardées à la flamme
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 247. list: Toplotno skrčljive poliolefinske cevi z dvojno steno, neognjevarne, debelostenske in srednje debele stene - Dopolnilo A1 (IEC 60684-3-247:2011/A1:2016)
General Information
- Status
- Withdrawn
- Publication Date
- 16-Mar-2017
- Withdrawal Date
- 17-Jan-2020
- Technical Committee
- CLC/SR 15 - Insulating materials
- Drafting Committee
- IEC/TC 15 - IEC_TC_15
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Sep-2022
- Completion Date
- 12-Sep-2022
Relations
- Effective Date
- 08-Oct-2019
- Effective Date
- 07-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60684-3-247:2011/A1:2017 is a amendment published by CLC. Its full title is "Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall". This standard covers: IEC 60684-3-247:2011 gives the requirements for two types of heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. - Type A: Medium wall, internal diameter up to 200,0 mm typically; and Type B: Thick wall, internal diameter up to 200,0 mm typically.
IEC 60684-3-247:2011 gives the requirements for two types of heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. - Type A: Medium wall, internal diameter up to 200,0 mm typically; and Type B: Thick wall, internal diameter up to 200,0 mm typically.
EN 60684-3-247:2011/A1:2017 is classified under the following ICS (International Classification for Standards) categories: 29.035.20 - Plastics and rubber insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60684-3-247:2011/A1:2017 has the following relationships with other standards: It is inter standard links to EN IEC 60684-3-247:2019, EN 60684-3-247:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60684-3-247:2011/A1:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2017
*LENHL]RODFLMVNHFHYLGHO 6SHFLILNDFLMH]DSRVDPH]QHWLSHFHYLOLVW
7RSORWQRVNUþOMLYHSROLROHILQVNHFHYL]GYRMQRVWHQRQHRJQMHYDUQHGHEHORVWHQVNH
LQVUHGQMHGHEHOHVWHQH'RSROQLOR$ ,(& $
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
247: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium
wall (IEC 60684-3-247:2011/A1:2016)
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 247:
Wärmeschrumpfende Polyolefinschläuche mit Innenbeschichtung, nicht flammhemmend,
dickwandig und mittlere Wanddicke (IEC 60684-3-247:2011/A1:2016)
Gaines isolantes souples - Partie 3 : spécifications pour types particuliers de gaines -
Feuille 247 : gaines thermorétractables en polyoléfine, à double paroi (épaisse et
moyenne), non retardées à la flamme (IEC 60684-3-247:2011/A1:2016)
Ta slovenski standard je istoveten z: EN 60684-3-247:2011/A1:2017
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60684-3-247:2011/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 29.035.20
English Version
Flexible insulating sleeving - Part 3: Specifications for individual
types of sleeving - Sheet 247: Heat-shrinkable polyolefin
sleeving, dual wall, not flame retarded, thick and medium wall
(IEC 60684-3-247:2011/A1:2016)
Gaines isolantes souples - Partie 3: Spécifications pour Isolierschläuche - Teil 3: Anforderungen für einzelne
types particuliers de gaines - Feuille 247: Gaines Schlauchtypen - Blatt 247: Wärmeschrumpfende
thermorétractables en polyoléfine, à double paroi (épaisse Polyolefinschläuche mit Innenbeschichtung, nicht
et moyenne), non retardées à la flamme flammhemmend, dickwandig und mittlere Wanddicke
(IEC 60684-3-247:2011/A1:2016) (IEC 60684-3-247:2011/A1:2016)
This amendment A1 modifies the European Standard EN 60684-3-247:2011; it was approved by CENELEC on 2017-01-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60684-3-247:2011/A1:2017 E
European foreword
The text of document 15/754/CDV, future IEC 60684-3-247:2011/A1, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60684-3-247:2011/A1:2017.
The following dates are fixed:
(dop) 2017-10-18
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-01-18
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60684-3-247:2011/A1:2016 was approved by CENELEC as
a European Stand
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...