EN 60317-57:2010/A1:2024
(Amendment)Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 57: Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220
Spécifications pour types particuliers de fils de bobinage - Partie 57: Fil de section circulaire en cuivre émaillé avec polyamide-imide, classe 220
Specifikacije za posebne tipe navitij - 57. del: S poliesterimidom emajliran bakren okrogel vodnik, razred 220 - Dopolnilo A1 (IEC 60317-57:2010/AMD1:2024)
General Information
Relations
Overview
EN 60317-57:2010/A1:2024 is the CLC-endorsed amendment to the European implementation of IEC 60317-57:2010, covering polyamide-imide enamelled round copper wire, class 220. Published and approved by CENELEC in 2024, this amendment updates normative references and clarifies application of the general requirements given in IEC 60317-0-1:2013 and its Amendment 1:2019. The standard is part of the IEC 60317 series on specifications for particular types of winding wires.
This document is intended to be used together with IEC 60317-0-1 and its amendment; where inconsistencies exist, EN 60317-57 prevails. It also indicates specific tests that are not applicable for this wire type.
Key Topics
- Scope and reference alignment
- Confirms use in conjunction with IEC 60317-0-1:2013 and IEC 60317-0-1:2013/AMD1:2019.
- Terms and definitions
- Adopts definitions from IEC 60317-0-1 to ensure consistent terminology across winding wire standards.
- Methods of test
- Refers to the general test procedures in IEC 60317-0-1; where differences occur, EN 60317-57 provides precedence.
- Clause updates and clarifications
- Revised clause titles and structure for terms, definitions, general notes and appearance.
- Explicit statements that specific tests (for example, resistance to refrigerants and to transformer oil) are marked as inappropriate for this material class.
- Standardization and legal notes
- Amendment endorsed by CENELEC and binding for members; national adoption dates and withdrawal timelines are specified in the foreword.
Applications
EN 60317-57:2010/A1:2024 provides practical guidance and requirements for manufacturers, designers and specifiers of electrical windings where polyamide-imide enamelled round copper wire (class 220) is selected. Typical applications include:
- Electrical coils and windings used in motors, generators and actuators
- Transformer windings and related components where high-class enamel insulation is required
- Specialized electrical equipment requiring assured thermal and electrical integrity
Practical benefits include standardized material classification, harmonized test methods (via IEC 60317-0-1), clearer conformity expectations for supply chains, and documented exclusions of inappropriate tests to avoid unnecessary testing and cost.
Related Standards
- IEC 60317-57:2010/AMD1:2024 (original international amendment)
- IEC 60317-0-1:2013 and IEC 60317-0-1:2013/AMD1:2019 (general requirements and test methods for enamelled round copper wire)
- Other parts of the IEC 60317 series covering different classes and insulation systems for winding wires.
For implementation or conformity queries, stakeholders should consult their national CENELEC committee and the full text of EN 60317-57:2010/A1:2024 to confirm precise requirements and dates for national adoption.
Frequently Asked Questions
EN 60317-57:2010/A1:2024 is a amendment published by CLC. Its full title is "Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220". This standard covers: Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220
EN 60317-57:2010/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60317-57:2010/A1:2024 has the following relationships with other standards: It is inter standard links to EN 60317-57:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60317-57:2010/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Specifikacije za posebne tipe navitij - 57. del: S poliesterimidom emajliran bakren
okrogel vodnik, razred 220 - Dopolnilo A1 (IEC 60317-57:2010/AMD1:2024)
Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled
round copper wire, class 220 (IEC 60317-57:2010/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 57:
Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 220 (IEC 60317-
57:2010/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 57: Fil de section
circulaire en cuivre émaillé avec polyamide-imide, classe 220 (IEC 60317-
57:2010/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-57:2010/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60317-57:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 57:
Polyamide-imide enamelled round copper wire, class 220
(IEC 60317-57:2010/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 57: Fil de section circulaire en cuivre émaillé avec Wickeldrähten - Teil 57: Runddrähte aus Kupfer, lackisoliert
polyamide-imide, classe 220 mit Polyamidimid, Klasse 220
(IEC 60317-57:2010/AMD1:2024) (IEC 60317-57:2010/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-57:2010; it was approved by CENELEC on 2024-07-23. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-57:2010/A1:2024 E
European foreword
The text of document 55/1995/CDV, future IEC 60317-57/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
57:2010/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-23
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-57:2010/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-1 2013 Specifications for particular types of EN 60317-0-1 2014
winding wires - Part 0-1: General
requirements - Enamelled round copper
wire
+ AMD1 2019 + A1 2019
IEC 60317-57 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –
Part 57: Polyamide-imide enamelled round copper wire, class 220
Spécifications pour types particuliers de fils de bobinage –
Partie 57: Fil de section circulaire en cuivre émaillé avec polyamide-imide,
classe 220
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-9028-6
– 2 – IEC 60317-57:2010/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 57: Polyamide-imide enamelled round copper wire, class 220
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all nationa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...