EN 60317-13:2010/A1:2024
(Amendment)Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 13: Runddrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit Polyamidimid, Klasse 200
Spécifications pour types particuliers de fils de bobinage - Partie 13: Fil de section circulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200
Specifikacije za posebne vrste navijalnih žic - 13. del: S poliestrom ali poliesterimidom emajliran bakren okrogel vodnik, prekrit s poliamidimidom, razred 200 - Dopolnilo A1 (IEC 60317-13:2010/AMD1:2024)
General Information
- Status
- Published
- Publication Date
- 08-Aug-2024
- Technical Committee
- CLC/TC 55 - Winding wires
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 09-Aug-2024
- Due Date
- 29-Dec-2023
- Completion Date
- 09-Aug-2024
Relations
- Effective Date
- 14-Feb-2023
Overview
EN 60317-13:2010/A1:2024 (CLC adoption of IEC 60317-13:2010/AMD1:2024) defines the specification for polyester or polyesterimide enamelled round copper wire overcoated with polyamide‑imide, class 200. This amendment A1 updates normative references, clarifies test method priorities and aligns the part with IEC 60317-0-1 and IEC 60851-4. The standard is published by CENELEC and intended for national adoption by member bodies.
Key practical points:
- Applies to enamelled round copper winding wires with a polyester or polyesterimide base enamel and a polyamide‑imide overcoat.
- Designated class 200, indicating this product family and its intended thermal/insulation class as defined across the IEC series.
- Amendment A1 was approved by CENELEC (2024-07-23) and contains editorial and normative updates.
Key Topics
- Normative references: The amendment explicitly references IEC 60317-0-1:2013 and its Amendment 1:2019 (consolidated in later editions) and IEC 60851-4:2016 for chemical property test methods.
- Methods of test: The document clarifies that subclause 3.2.1 of IEC 60317-0-1 applies for methods of test and that, in case of inconsistencies, EN/IEC 60317-13 prevails.
- Appearance and general requirements: Appearance requirements refer to the general rules in IEC 60317-0-1:2013.
- Specific clause changes: Examples include replacement of references for electrical resistance and refrigerant resistance, and a statement that the transformer oil test in this context is "inappropriate".
Applications
This standard supports procurement, quality assurance and compliance for manufacturers, specifiers and purchasers of winding wires used in electrical components such as:
- Motors and generators
- Transformers and chokes
- Inductors and precision coils
Using EN 60317-13:2010/A1:2024 helps ensure consistent material selection, harmonised testing practices and clear conformity assessment when specifying polyester/polyesterimide enamelled copper wire with polyamide‑imide overcoat (class 200).
Related Standards
- IEC 60317-0-1:2013 / AMD1:2019 - General requirements for enamelled round copper wire (normative reference for test procedures and general criteria).
- IEC 60851-4:2016 - Winding wires - Test methods, Part 4: Chemical properties (referenced for chemical resistance testing).
Practical value
Adopting EN 60317-13:2010/A1:2024 in specifications and procurement documents reduces ambiguity in material performance, aligns laboratory testing with recognised IEC procedures, and supports regulatory and market acceptance across CENELEC member countries. For detailed test procedures and full normative text, users should consult the referenced IEC documents and the official published standard.
Frequently Asked Questions
EN 60317-13:2010/A1:2024 is a amendment published by CLC. Its full title is "Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200". This standard covers: Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
EN 60317-13:2010/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60317-13:2010/A1:2024 has the following relationships with other standards: It is inter standard links to EN 60317-13:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60317-13:2010/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Specifikacije za posebne vrste navijalnih žic - 13. del: S poliestrom ali
poliesterimidom emajliran bakren okrogel vodnik, prekrit s poliamidimidom, razred
200 - Dopolnilo A1 (IEC 60317-13:2010/AMD1:2024)
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide
overcoated with polyamide-imide enamelled round copper wire, class 200 (IEC 60317-
13:2010/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 13:
Runddrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit
Polyamidimid, Klasse 200 (IEC 60317-13:2010/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 13: Fil de section
circulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche
polyamide-imide, classe 200 (IEC 60317-13:2010/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-13:2010/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60317-13:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 13:
Polyester or polyesterimide overcoated with polyamide-imide
enamelled round copper wire, class 200
(IEC 60317-13:2010/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 13: Fil de section circulaire en cuivre émaillé avec Wickeldrähten - Teil 13: Runddrähte aus Kupfer, lackisoliert
polyester ou polyesterimide et avec surcouche polyamide- mit Polyester oder Polyesterimid und darüber mit
imide, classe 200 Polyamidimid, Klasse 200
(IEC 60317-13:2010/AMD1:2024) (IEC 60317-13:2010/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-13:2010; it was approved by CENELEC on 2024-07-23. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-13:2010/A1:2024 E
European foreword
The text of document 55/1983/CDV, future IEC 60317-13/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
13:2010/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-23
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-13:2010/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-1 2013 Specifications for particular types of EN 60317-0-1 2014
winding wires - Part 0-1: General
requirements - Enamelled round copper
wire
+ AMD1 2019 + A1 2019
IEC 60851-4 2016 Winding wires - Test methods - Part 4: EN 60851-4 2016
Chemical properties
IEC 60317-13 ®
Edition 3.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –
Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled
round copper wire, class 200
Spécifications pour types particuliers de fils de bobinage –
Partie 13: Fil de section circulaire en cuivre émaillé avec polyester ou
polyesterimide et avec surcouche polyamide-imide, classe 200
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-9015-6
Attention! Veuillez vous assur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...