EN 61850-7-3:2011

SLOVENSKI STANDARD
01-maj-2011
1DGRPHãþD
SIST EN 61850-7-3:2004
.RPXQLNDFLMVNDRPUHåMDLQVLVWHPL]DDYWRPDWL]DFLMRSRUDEHHOHNWULþQHHQHUJLMH
GHO2VQRYQDNRPXQLNDFLMVNDVWUXNWXUD6NXSQLSRGDWNRYQLUD]UHGL,(&

Communication networks and systems for power utility automation - Part 7-3: Basic
communication structure - Common data classes (IEC 61850-7-3:2010)
Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen
Energieversorgung - Teil 7-3: Grundlegende Kommunikationsstruktur - Gemeinsame
Datenklassen (IEC 61850-7-3:2010)
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques
- Partie 7-3: Structure de communication de base - Classes de données communes (CEI
61850-7-3:2010)
Ta slovenski standard je istoveten z: EN 61850-7-3:2011
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61850-7-3
NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM
ICS 33.200 Supersedes EN 61850-7-3:2003

English version
Communication networks and systems for power utility automation -
Part 7-3: Basic communication structure -
Common data classes
(IEC 61850-7-3:2010)
Réseaux et systèmes de communication Kommunikationsnetze und -systeme für
pour l'automatisation des systèmes die Automatisierung in der elektrischen
électriques - Energieversorgung -
Partie 7-3: Structure de communication de Teil 7-3: Grundlegende
base - Kommunikationsstruktur -
Classes de données communes Gemeinsame Datenklassen
(CEI 61850-7-3:2010) (IEC 61850-7-3:2010)

This European Standard was approved by CENELEC on 2011-01-20. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61850-7-3:2011 E
Foreword
The text of document 57/1087/FDIS, future edition 2 of IEC 61850-7-3, prepared by IEC TC 57, Power
systems management and associated information exchange, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61850-7-3 on 2010-12-07.
This European Standard supersedes EN 61850-7-3:2003.
Compared to EN 61850-7-3:2003, this edition:
– defines new common data classes used for new standards defining object models for other domains
based on EN 61850 and for the representation of statistical and historical data;
– provides clarifications and corrections to EN 61850-7-3:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-09-07
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-12-07
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61850-7-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61850-8 series NOTE  Harmonized in EN 61850-8 series (not modified).
IEC 61850-9 series NOTE  Harmonized EN 61850-9 series (not modified).
__________
- 3 - EN 61850-7-3:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC/TS 61850-2 - Communication networks and systems in - -
substations -
Part 2: Glossary
IEC 61850-7-1 - Communication networks and systems in EN 61850-7-1 -
substations -
Part 7-1: Basic communication structure for
substation and feeder equipment - Principles
and models
IEC 61850-7-2 - Communication networks and systems for EN 61850-7-2 -
power utility automation -
Part 7-2: Basic information and
communication structure - Abstract
communication service interface (ACSI)

IEC 61850-7-4 - Communication networks and systems for EN 61850-7-4 -
power utility automation -
Part 7-4: Basic communication structure -
Compatible logical node classes and data
object classes
ISO 4217 - Codes for the representation of currencies - -
and funds
IEEE C37.118 2005 IEEE Standard for Synchrophasors for Power - -
Systems
IEC 61850-7-3 ®
Edition 2.0 2010-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Communication networks and systems for power utility automation –
Part 7-3: Basic communication structure – Common data classes

Réseaux et systèmes de communication pour l'automatisation des systèmes
électriques –
Partie 7-3: Structure de communication de base – Classes de données
communes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XD
CODE PRIX
ICS 33.200 ISBN 978-2-88912-258-5
– 2 – 61850-7-3 Ó IEC:2010
CONTENTS
FOREW ORD . 6
INTRODUCTION . 8
1 Sc o pe . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Abbreviated terms . 10
5 Conditions for attribute inclusion . 10
6 Constructed attribute classes . 11
6.1 General . 11
6.2 Quality . 11
6.2.1 Ov erv iew . 11
6.2.2 Validity . 12
6.2.3 Detail quality . 13
6.2.4 Source . 14
6.2.5 Test . 14
6.2.6 Frozen by operator . 14
6.2.7 Quality in the client server context . 15
6.2.8 Relation between quality identifiers . 16
6.3 Analogue value . 18
6.4 Configuration of analogue value . 18
6.5 Range configuration . 19
6.6 Step position with transient indication. 19
6.7 Pulse configuration. 20
6.8 Originator . 20
6.9 Unit definition . 21
6.10 Vector definition . 21
6.11 Point definition . 22
6.12 CtlModels definition . 22
6.13 SboClasses definition . 22
6.14 Cell. 22
6.15 CalendarTime definition . 23
7 Common data class specifications . 25
7.1 General . 25
7.2 Name spaces . 25
7.3 Common data class specifications for status information . 25
7.3.1 Application of services . 25
7.3.2 Single point status (SPS) . 26
7.3.3 Double point status (DPS) . 27
7.3.4 Integer status (INS) . 27
7.3.5 Enumerated status (ENS). 28
7.3.6 Protection activation information (ACT) . 28
7.3.7 Directional protection activation information (ACD) . 29
7.3.8 Security violation counting (SEC) . 30
7.3.9 Binary counter reading (BCR) . 30
7.3.10 Histogram (HST) . 31

61850-7-3 Ó IEC:2010 – 3 –
7.3.11 Visible string status (VSS). 31
7.4 Common data class specifications for measurand information . 32
7.4.1 Application of services . 32
7.4.2 Measured value (MV) . 33
7.4.3 Complex measured value (CMV) . 34
7.4.4 Sampled value (SAV) . 35
7.4.5 Phase to ground/neutral related measured values of a three-phase
system (WYE) . 36
7.4.6 Phase to phase related measured values of a three-phase system
(DEL) . 37
7.4.7 Sequence (SEQ) . 38
7.4.8 Harmonic value (HMV) . 39
7.4.9 Harmonic value for WYE (HWYE) . 40
7.4.10 Harmonic value for DEL (HDEL) . 41
7.5 Common data class specifications for controls . 42
7.5.1 Application of services . 42
7.5.2 Controllable single point (SPC) . 43
7.5.3 Controllable double point (DPC) . 44
7.5.4 Controllable integer status (INC) . 45
7.5.5 Controllable enumerated stat
...