EN 60317-59:2016/A1:2024
(Amendment)Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 59: Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 240
Spécifications pour types particuliers de fils de bobinage - Partie 59: Fil de section circulaire en cuivre émaillé avec polyamide-imide, classe 240
Zahteve za posebne vrste žic za navijanje - 59. del: Okrogla bakrena žica, lakirana s poliamidimidnim lakom, razred 240 - Dopolnilo A1 (IEC 60317-59:2015/AMD1:2024)
General Information
Relations
Overview
EN 60317-59:2016/A1:2024 is the CENELEC-adopted amendment to IEC 60317-59 and specifies requirements for polyamide‑imide enamelled round copper wire, class 240 - a high‑performance enamelled winding wire used where enhanced thermal and dielectric performance is required. Amendment A1 (approved July 2024) updates normative references, testing references and clarifies applicability of selected tests. This document is part of the IEC 60317 series for particular types of winding wires and is intended for use alongside IEC 60317-0-1 and its amendment.
Key topics
- Scope and designation
- Defines the product: polyamide‑imide enamelled, round copper winding wire, class 240 (high thermal endurance).
- Normative references
- Now explicitly used in conjunction with IEC 60317-0-1:2013 and IEC 60317-0-1:2013/AMD1:2019 (consolidated editions referenced).
- Terms, definitions and test methods
- Terms and definitions are aligned with IEC 60317-0-1 (Electropedia and ISO/IEC terminology sources referenced).
- Methods of test defer to IEC 60317-0-1; where inconsistencies occur, EN/IEC 60317-59 takes precedence.
- Technical clarifications
- Clause updates include reference to electrical resistance testing per IEC 60317-0-1.
- Certain environmental tests (resistance to refrigerants and resistance to transformer oil) are identified as “test inappropriate” for this wire type.
- Standards governance
- Amendment A1 was approved by CENELEC (23 July 2024); national implementation deadlines are provided for European members.
Applications
- Intended for manufacturers, specifiers and quality labs involved with winding wires used in:
- Motors, generators and stators
- Power transformers and distribution transformers
- High-temperature coils, inductors and solenoids
- Other electrotechnical equipment where electrical insulation and elevated thermal class performance are required
- Useful for: wire producers, electrical appliance designers, compliance/test laboratories and procurement teams requiring standardized material and test criteria.
Related standards
- IEC 60317-59 (base edition) / EN 60317-59:2016
- IEC 60317-0-1:2013 and IEC 60317-0-1:2013/AMD1:2019 (general requirements and test methods)
- Other parts of the IEC 60317 series covering different enamel systems and wire types
Keywords: EN 60317-59:2016/A1:2024, polyamide‑imide enamelled round copper wire, class 240 winding wire, IEC 60317-59 amendment, winding wires standard, electrical insulation, wire testing, thermal class 240.
Frequently Asked Questions
EN 60317-59:2016/A1:2024 is a amendment published by CLC. Its full title is "Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240". This standard covers: Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
EN 60317-59:2016/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60317-59:2016/A1:2024 has the following relationships with other standards: It is inter standard links to EN 60317-59:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60317-59:2016/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Zahteve za posebne vrste žic za navijanje - 59. del: Okrogla bakrena žica, lakirana
s poliamidimidnim lakom, razred 240 - Dopolnilo A1 (IEC 60317-
59:2015/AMD1:2024)
Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled
round copper wire, class 240 (IEC 60317-59:2015/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 59:
Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 240 (IEC 60317-
59:2015/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 59: Fil de section
circulaire en cuivre émaillé avec polyamide-imide, classe 240 (IEC 60317-
59:2015/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-59:2016/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60317-59:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 59:
Polyamide-imide enamelled round copper wire, class 240
(IEC 60317-59:2015/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 59: Fil de section circulaire en cuivre émaillé avec Wickeldrähten - Teil 59: Runddrähte aus Kupfer, lackisoliert
polyamide-imide, classe 240 mit Polyamidimid, Klasse 240
(IEC 60317-59:2015/AMD1:2024) (IEC 60317-59:2015/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-59:2016; it was approved by CENELEC on 2024-07-23. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-59:2016/A1:2024 E
European foreword
The text of document 55/1997/CDV, future IEC 60317-59/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
59:2016/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-23
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-59:2015/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-1 2013 Specifications for particular types of EN 60317-0-1 2014
winding wires - Part 0-1: General
requirements - Enamelled round copper
wire
+ AMD1 2019 + A1 2019
IEC 60317-59 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –
Part 59: Polyamide-imide enamelled round copper wire, class 240
Spécifications pour types particuliers de fils de bobinage –
Partie 59: Fil de section circulaire en cuivre émaillé avec polyamide-imide,
classe 240
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-9045-3
– 2 – IEC 60317-59:2015/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 59: Polyamide-imide enamelle
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...