Optical fibre cables - Part 1-309: Generic specification - Basic optical cable test procedures - Cable element test methods - Bleeding and evaporation of filling or flooding compounds, Method G9

IEC 60794-1-309:2023 describes the test procedures to be used in establishing uniform requirements for optical fibre cable elements, filling compounds or flooding compounds, for the environmental property-bleeding and evaporation. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. NOTE Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This first edition of IEC 60794-1-309 cancels and replaces method G9 of the second edition of IEC 60794-1-23 published in 2019. This edition includes the following significant technical changes with respect to the previous edition: a) the optical cable element test methods contained in IEC 60794-1-23:2019 will now be individually numbered in the IEC 60794-1-3xx series. Each test method is now considered to be an individual document rather than part of a multi-test method compendium. Full cross-reference details are given in IEC 60794-1-2; b) the scope is broadened so that the test method is also applicable for flooding compounds; c) the cover of the test set-up is cancelled.

Lichtwellenleiterkabel - Teil 1-309: Fachgrundspezifikation - Grundlegende Prüfverfahren für optische Kabel - Prüfverfahren für Kabelelemente - Austropfen und Verdampfen von Ader- und Kabelfüllmassen, Methode G9

Câbles à fibres optiques - Partie 1-309: Spécification générique - Procédures fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câble - Exsudation et évaporation des composés de remplissage ou d’étanchéité, Méthode G9

IEC 60794-1-309:2023 décrit les procédures d’essai à utiliser afin d’établir des exigences uniformes pour les éléments de câbles à fibres optiques, les composés de remplissage ou les composés d’étanchéité pour la propriété environnementale d’exsudation et d’évaporation. Le présent document s’applique aux câbles à fibres optiques destinés à être utilisés avec des équipements de communication et des dispositifs utilisant des techniques analogues, ainsi qu’aux câbles constitués de fibres optiques d’une part et de conducteurs électriques d’autre part. NOTE Tout au long du présent document, l’expression "câble optique" peut également inclure des unités de fibres optiques, des unités de fibres pour microconduits, etc. Cette première édition de l’IEC 60794-1-309 annule et remplace la méthode G9 de la deuxième édition de l’IEC 60794-1-23 parue en 2019. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) les méthodes d’essai des éléments de câble optiques contenues dans l’IEC 60794-1-23: 2019 sont désormais numérotées individuellement dans la série IEC 60794-1-3xx. Chaque méthode d’essai est désormais considérée comme un document distinct et non plus comme une partie d’un recueil regroupant plusieurs méthodes d’essai. Le détail de l’ensemble des références croisées est donné dans l’IEC 60794-1-2; b) le domaine d’application a été élargi de manière à ce que la méthode d’essai s’applique aussi aux composés d’étanchéité; c) le capot de l’appareillage d’essai est supprimé.

Optični kabli - 1-309. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Iztekanje in izhlapevanje polnila ali zalivnih zmesi, metoda G9 (IEC 60794-1-309:2023)

Standard IEC 60794-1-309:2023 opisuje preskusne postopke, ki jih je treba uporabiti pri določanju enotnih zahtev glede elementov optičnih kablov, polnil ali zalivnih zmesi za okoljsko iztekanje in izhlapevanje. Ta dokument se uporablja za optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov.
OPOMBA: V tem dokumentu lahko izraz »optični kabel« vključuje tudi optične enote, mikrokanale itd. Prva izdaja standarda IEC 60794-1-309 razveljavlja in nadomešča metodo G9 iz druge izdaje standarda IEC 60794-1-23, objavljenega leta 2019. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) Preskusne metode za elemente optičnih kablov iz standarda IEC 60794-1-23:2019 so posamezno oštevilčene v skupini standardov IEC 60794-1-3xx. Vsaka preskusna metoda je zdaj posamezen dokument in ne del sklopa metode z več preskusi. Vse podrobnosti o navzkrižnem sklicevanju so navedene v standardu IEC 60794-1-2.
b) Področje uporabe je razširjeno tako, da se preskusna metoda uporablja tudi za zalivne zmesi.
c) Priprava preskusa ni več zajeta.

General Information

Status
Published
Publication Date
25-May-2023
Current Stage
6060 - Document made available - Publishing
Start Date
26-May-2023
Due Date
07-Apr-2023
Completion Date
26-May-2023

Relations

Buy Standard

Standard
EN IEC 60794-1-309:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2023
Optični kabli - 1-309. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Iztekanje in izhlapevanje
polnila ali zalivnih zmesi, metoda G9 (IEC 60794-1-309:2023)
Optical fibre cables - Part 1-309: Generic specification - Basic optical cable test
procedures - Cable element test methods- Bleeding and evaporation of filling or flooding
compounds, Method G9 (IEC 60794-1-309:2023)
Lichtwellenleiterkabel - Teil 1-309: Allgemeine Spezifikation - Grundlegende
Prüfverfahren für optische Kabel – Prüfverfahren für Kabelelemente - Entlüften und
Verdampfen von Füll- oder Flutungsmassen, Methode G9 (IEC 60794-1-309:2023)
Câbles à fibres optiques - Partie 1-309: Spécification générique - Procédures
fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câble -
Exsudation et évaporation des composés de remplissage ou d’étanchéité, Méthode G9
(IEC 60794-1-309:2023)
Ta slovenski standard je istoveten z: EN IEC 60794-1-309:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60794-1-309

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-309: Generic specification - Basic
optical cable test procedures - Cable element test methods -
Bleeding and evaporation of filling or flooding compounds,
Method G9
(IEC 60794-1-309:2023)
Câbles à fibres optiques - Partie 1-309: Spécification Lichtwellenleiterkabel - Teil 1-309: Fachgrundspezifikation -
générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essai des éléments de câble - Entlüften und Verdampfen von Füll- oder Flutungsmassen,
Exsudation et évaporation des composés de remplissage Verfahren G9
ou d'étanchéité, Méthode G9 (IEC 60794-1-309:2023)
(IEC 60794-1-309:2023)
This European Standard was approved by CENELEC on 2023-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-309:2023 E

European foreword
The text of document 86A/2305/FDIS, future edition 1 of IEC 60794-1-309, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-309:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-23
document have to be withdrawn
This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-309:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60794-1-309 ®
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-309: Generic specification – Basic optical cable test procedures – Cable

element test methods – Bleeding and evaporation of filling or flooding

compounds, Method G9
Câbles à fibres optiques –
Partie 1-309: Spécification générique – Procédures fondamentales d’essai des

câbles optiques – Méthodes d’essai des éléments de câble – Exsudation et

évaporation des composés de remplissage ou d’étanchéité, Méthode G9

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-6852-0

– 2 – IEC 60794-1-309:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Method G9: Bleeding and evaporation . 5
5.1 Object . 5
5.2 Sample . 6
5.3 Apparatus . 6
5.4 Procedure . 6
5.5 Requirements . 7
5.6 Details to be specified . 7
5.7 Details to be reported . 7

Figure 1 – Bleeding and evaporation test set-up . 6

IEC 60794-1-309:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-309: Generic specification – Basic optical cable test procedures –
Cable element test methods – Bleeding and evaporation of filling
or flooding compounds, Method G9

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.