EN 61754-4-100:2016

SLOVENSKI STANDARD
01-maj-2016
1DGRPHãþD
SIST EN 61754-4-1:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNL]DRSWLþQHNRQHNWRUMH
GHO.RQHNWRUVNDGUXåLQDYUVWH6&3RHQRVWDYOMHQLVSUHMHPOMLYL6&3&
NRQHNWRUVNLYPHVQLNL,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC
connector interfaces (IEC 61754-4-100:2015)
Ta slovenski standard je istoveten z: EN 61754-4-100:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61754-4-100

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 33.180.20 Supersedes EN 61754-4-1:2003
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces - Part 4-100: Type SC connector
family - Simplified receptacle SC-PC connector interfaces
(IEC 61754-4-100:2015)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Interfaces de connecteurs à fibres optiques - Bauteile - Steckgesichter von Lichtwellenleiter-
Partie 4-100: Famille de connecteurs de type SC - Steckverbindern - Teil 4-100: Steckverbinderfamilie der
Interfaces de connecteur SC-PC à embase simplifiée Bauart SC - Steckgesichter von vereinfachten SC-PC-
(IEC 61754-4-100:2015) Anschlussbuchsen
(IEC 61754-4-100:2015)
This European Standard was approved by CENELEC on 2015-12-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61754-4-100:2016 E

European foreword
The text of document 86B/3938/FDIS, future edition 1 of IEC 61754-4-100, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-4-100:2016.
The following dates are fixed:
(dop) 2016-09-10
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2016-12-10
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61754-4-1:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61754-4-100:2015 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61300-3-22 -  Fibre optic interconnecting devices and EN 61300-3-22 -
passive components - Basic test and
measurement procedures -
Part 3-22: Examinations and
measurements - Ferrule compression
force
IEC 61754-4 2013 Fibre optic interconnecting devices and EN 61754-4 2013
passive components - Fibre optic
connector interfaces -
Part 4: Type SC connector family
IEC 61755-3-1 -  Fibre optic connector optical interfaces - EN 61755-3-1 -
Part 3-1: Optical interface, 2,5 mm and
1,25 mm diameter cylindrical full zirconia
PC ferrule, single mode fibre
IEC 61754-4-100 ®
Edition 1.0 2015-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic

connector interfaces –
Part 4-100: Type SC connector family – Simplified receptacle SC-PC connector

interfaces
Dispositifs d'interconnexion et composants passifs à fibres optiques –

Interfaces de connecteurs à fibres optiques –

Partie 4-100: Famille de connecteurs de type SC – Interfaces de connecteur

SC-PC à embase simplifiée
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-2992-7

– 2 – IEC 61754-4-100:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Description . 5
4 Interfaces . 6
4.1 General . 6
4.2 Intermateability . 6
4.3 Interfaces and dimensions . 6
Annex A (informative) Example of an intermateable set including a simplified
receptacle . 12
Bibliography . 13

Figure 1 – Simplified receptacle housing interface . 7
Figure 2 – Pin gauge for adaptor . 9
Figure 3 – Simplified plug interface . 10
Figure A.1 – Example of an intermateable set including a simplified receptacle . 12

Table 1 – Intermateability of the interface . 6
Table 2 – Dimensions of the simplified receptacles housings interface . 8
Table 3 – Grade of the simplified receptacles housings interface . 8
Table 4 – Pin gauge dimensions . 9
Table 5 – Dimensions of the simplified plug interface . 11
Table 6 – Grade of the simplified plug interface . 11

IEC 61754-4-100:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –

Part 4-100: Type SC connector family –
Simplified receptacle SC-PC connector interfaces

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regio
...