EN 61300-3-18:2006

STANDARDPovezovalne naprave in pasivne komponente optičnih vlaken – Osnovno preskušanje in merilni postopki – 3-18. del: Preiskovanje in meritve – Točnost ujemanja v kotnem zaključnem konektorju (IEC 61300-3-18:2005)Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-18: Examinations and measurements – Keying accuracy of an angled endface connector (IEC 61300-3-18:2005)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61300-3-18:2006(en)ICS33.180.20

EUROPEAN STANDARD EN 61300-3-18 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2006
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-18:2006 E
ICS 33.180.20 Supersedes EN 61300-3-18:1997
English version
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector (IEC 61300-3-18:2005)
Dispositifs d'interconnexion
et composants passifs à fibres optiques -Méthodes fondamentales d'essais
et de mesures Partie 3-18: Examens et mesures -Précision du détrompage d'un connecteur à face terminale avec angle (CEI 61300-3-18:2005)
Lichtwellenleiter -
Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren Teil 3-18: Untersuchungen und Messungen -
Genauigkeit der Außenzentrierung eines Steckverbinders mit schräger Endfläche
(IEC 61300-3-18:2005)
This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

- 2 -
Foreword The text of document 86B/2215/FDIS, future edition 2 of IEC 61300-3-18, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-18 on 2006-03-01. This European Standard supersedes EN 61300-3-18:1997. Specific changes from EN 61300-3-18:1997 are the clause structure and the figure layout throughout the whole document. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2009-03-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61300-3-18:2005 was approved by CENELEC as a European Standard without any modification. __________

- 3 - EN 61300-3-18:2006
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year ISO 2538 –1) Geometrical Product Specifications (GPS) - Series of angles and slopes on prisms EN ISO 2538 20032)
1) Undated reference. 2) Valid edition at date of issue.

NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61300-3-18Deuxième éditionSecond edition2005-12 Dispositifs d'interconnexion et
composants passifs à fibres optiques – Méthodes fondamentales d'essais et de mesures –Partie 3-18: Examens et mesures – Précision du détrompage d'un connecteur à face terminale avec angle
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-18: Examinations and measurements – Keying accuracy of an angled endface connector
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés

Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE H Commission Electrotechnique InternationaleInternational Electrotechnical Commission

61300-3-18  IEC:2005 – 3 –
CONTENTS
FOREWORD.5
1 Scope and object.9 2 Normative references.9 3 General description.9 4 Apparatus.11 5 Procedure.13 6 Details to be specified.15

61300-3-18  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS – BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-18: Examinations and measurements – Keying accuracy of an angled endface connector
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each
...