Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment

This part of IEC 61753 defines C/3 minimum initial test and measurement requirements and severities which a single-mode connector/cable assembly must satisfy in order to be categorized as meeting the IEC standard category C (controlled environment), as defined in Clause A.2 of IEC 61753-1. The standard has been updated to reflect changes made to IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 021-2: Lichtwellenleiter-Steckverbinder der Stufe C/3 für Einmodenfasern für die Kategorie C - Kontrollierte Umgebung

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 021-2: Connecteurs à fibres optiques unimodales de classe C/3 pour la catégorie C - Environnement contrôlé

La présente partie de la CEI 61753 définit les exigences d'essais et de mesures et les sévérités initiales minimales C/3 auxquels un assemblage câble/connecteur unimodaux doit satisfaire, afin d'être considéré comme satisfaisant aux critères de la catégorie C (environnements contrôlés) des normes CEI définis dans l'Article A.2 de la CEI 61753-1. Cette norme a été mise à jour afin de prendre en compte des modifications effectuées dans la CEI 61753-1.

Standard lastnosti optičnih spojnih elementov in pasivnih komponent - 021-2. del: Enorodne svitkaste naprave brez konektorjev CWDM za kategorijo C - Nadzorovano okolje (IEC 61753-021-2:2007)

General Information

Status
Published
Publication Date
13-Mar-2008
Withdrawal Date
28-Feb-2011
Current Stage
6060 - Document made available - Publishing
Start Date
14-Mar-2008
Completion Date
14-Mar-2008

Relations

Buy Standard

Standard
EN 61753-021-2:2008
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-021-2:2008
01-junij-2008
1DGRPHãþD
SIST EN 61753-021-2:2004
6WDQGDUGODVWQRVWLRSWLþQLKVSRMQLKHOHPHQWRYLQSDVLYQLKNRPSRQHQWGHO
(QRURGQHVYLWNDVWHQDSUDYHEUH]NRQHNWRUMHY&:'0]DNDWHJRULMR&
1DG]RURYDQRRNROMH ,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled
environment (IEC 61753-021-2:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
021-2: Lichtwellenleiter-Steckverbinder der Stufe C/3 für Einmodenfasern für die
Kategorie C - Kontrollierte Umgebung (IEC 61753-021-2:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs a fibres optiques - Partie 021-2: Connecteurs a fibres optiques unimodales de
classe C/3 pour la catégorie C - Environnement contrôlé (CEI 61753-021-2:2007)
Ta slovenski standard je istoveten z: EN 61753-021-2:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-021-2:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61753-021-2

NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61753-021-2:2002

English version


Fibre optic interconnecting devices
and passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic connectors
for category C -
Controlled environment
(IEC 61753-021-2:2007)


Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 021-2: Connecteurs à fibres Betriebsverhalten -
optiques unimodales de classe C/3 Teil 021-2: Lichtwellenleiter-
pour la catégorie C - Steckverbinder der Stufe C/3
Environnement contrôlé für Einmodenfasern für die Kategorie C -
(CEI 61753-021-2:2007) Kontrollierte Umgebung
(IEC 61753-021-2:2007)



This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-021-2:2008 E

---------------------- Page: 2 ----------------------

EN 61753-021-2:2008 - 2 -
Foreword
The text of document 86B/2602/FDIS, future edition 2 of IEC 61753-021-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-021-2 on 2008-03-01.
This European Standard supersedes EN 61753-021-2:2002.
EN 61753-021-2:2008 has been updated to reflect changes made to EN 61753-1:2007.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-021-2:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61753-021-2:2008

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensabl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.