EN 61290-3:2000
(Main)Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters
Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters
Applies to optical fibre amplifiers (OFAs) using active fibres, containing rare-earth dopants, presently commercially available. Provides the general background for OFA noise figure parameters measurements and indicates those IEC standard test methods for accurate and reliable measurements of the following OFA parameters: noise figure, noise factor, multiple path interference (MPI) figure of merit, signal-spontaneous noise figure, (equivalent) spontaneous-spontaneous optical bandwidth, forward amplified spontaneous emission (ASE) power level, reverse ASE power level, ASE bandwidth.
Lichtwellenleiter-Verstärker - Grundspezifikation - Teil 3: Prüfverfahren für Rauschzahlparameter
Amplificateurs à fibres optiques - Spécification de base - Partie 3: Méthodes d'essai des paramètres du facteur de bruit
S'applique aux amplificateurs à fibres optiques (AFO) utilisant les fibres actives dopées aux terres rares et qui sont actuellement disponibles sur le marché. Fournit le contexte général pour les mesures des paramètres du facteur de bruit des OFA et indique les méthodes d'essai normalisées de la CEI qui permettent la mesure précise et fiable des paramètres suivants des AFO: facteur de bruit, facteur de bruit linéaire, chiffre de mérite de l'interférence à trajectoires multiples, facteur de bruit signal/émission spontanée, largeur de bande optique (équivalente) spontanée-spontanée, niveau de puissance d'émission spontanée amplifiée (ESA) copropagative, niveau de puissance d'ESA contrapropagative, largeur de bande de l'ESA.
Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters (IEC 61290-3:2000)
General Information
- Status
- Withdrawn
- Publication Date
- 28-Aug-2000
- Technical Committee
- CLC/SR 86C - Fibre optic systems and active devices
- Drafting Committee
- IEC/SC 86C - IEC_SC_86C
- Parallel Committee
- IEC/SC 86C - IEC_SC_86C
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Oct-2011
- Completion Date
- 01-Oct-2011
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
TL 9000 QuEST Forum
Telecommunications quality management system.
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
Sponsored listings
Frequently Asked Questions
EN 61290-3:2000 is a standard published by CLC. Its full title is "Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters". This standard covers: Applies to optical fibre amplifiers (OFAs) using active fibres, containing rare-earth dopants, presently commercially available. Provides the general background for OFA noise figure parameters measurements and indicates those IEC standard test methods for accurate and reliable measurements of the following OFA parameters: noise figure, noise factor, multiple path interference (MPI) figure of merit, signal-spontaneous noise figure, (equivalent) spontaneous-spontaneous optical bandwidth, forward amplified spontaneous emission (ASE) power level, reverse ASE power level, ASE bandwidth.
Applies to optical fibre amplifiers (OFAs) using active fibres, containing rare-earth dopants, presently commercially available. Provides the general background for OFA noise figure parameters measurements and indicates those IEC standard test methods for accurate and reliable measurements of the following OFA parameters: noise figure, noise factor, multiple path interference (MPI) figure of merit, signal-spontaneous noise figure, (equivalent) spontaneous-spontaneous optical bandwidth, forward amplified spontaneous emission (ASE) power level, reverse ASE power level, ASE bandwidth.
EN 61290-3:2000 is classified under the following ICS (International Classification for Standards) categories: 33.180.30 - Optic amplifiers. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 61290-3:2000 has the following relationships with other standards: It is inter standard links to EN 61290-3:2008, EN 61290-3-2:2003, EN 61291-1:1998, EN 60728-6:2003, EN 61290-10-3:2003, EN 61290-5-3:2002, EN 61290-10-1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 61290-3:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2002
Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure
parameters (IEC 61290-3:2000)
Optical fibre amplifiers - Basic specification -- Part 3: Test methods for noise figure
parameters
Lichtwellenleiter-Verstärker - Grundspezifikation -- Teil 3: Prüfverfahren für
Rauschzahlparameter
Amplificateurs à fibres optiques - Spécification de base -- Partie 3: Méthodes d'essai des
paramètres du facteur de bruit
Ta slovenski standard je istoveten z: EN 61290-3:2000
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- P
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...