EN IEC 60793-1-32:2018
(Main)Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
This part of IEC 60793 is intended primarily for testing either fibres as produced by a fibre manufacturer or subsequently overcoated (tight buffered) using various polymers. The test can be performed either on fibres as produced, or after exposure to various environments. This test applies to A1, A2, A3, B and C fibres with a nominal glass dimension of 125 µm. The object of this document is to establish uniform requirements for the mechanical characteristic - coating strippability. This test quantifies the force required to mechanically remove the protective coating from optical fibres along their longitudinal axis. This test is not intended as a means to maximize fibre strength after the coating is removed nor is it intended to specify the best conditions for field stripping of optical fibres. This test is designed for optical fibres having polymeric coatings with nominal outer diameters in the range of 200 µm to 900 µm.
Lichtwellenleiter - Teil 1-32: Messmethoden und Prüfverfahren - Absetzbarkeit der Beschichtung
Fibres optiques - Partie 1-32: Méthodes de mesure et procédures d'essai - Dénudabilité du revêtement
La CEI 60793-1-32:2010 est destinée principalement aux essais des fibres, dès leur production par un fabricant de fibres, ou après revêtement ultérieur (revêtement protecteur serré) au moyen de divers polymères. L'essai peut être effectué soit sur des fibres issues de production, soit après exposition à divers environnements. Le présent essai s'applique aux fibres de type A1, A2, A3, B et C. Cette édition a été modifiée pour inclure les pratiques utilisées actuellement sur le marché. Cette publication contient des couleurs qui sont considérés comme étant utile pour une bonne compréhension de son contenu.
Optična vlakna - 1-32. del: Metode merjenja in preskusni postopki - Lupljivost prevleke (IEC 60793-1-32:2018)
Standard IEC 60793-1-32:2010(E) je namenjen predvsem za preskušanje vlaken v obliki, kot jih izdeluje proizvajalec vlaken, oziroma naknadno prekritih (tesen pufer) z različnimi polimeri. Preskus je mogoče izvesti na vlaknih neposredno iz proizvodnje ali po izpostavljenosti različnim okoljem. Ta preskus se uporablja za vlakna A1, A2, A3, B in C. Ta izdaja je bila spremenjena in vključuje trenutne prakse na trgu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Teil 1-32: Messmethoden und Prüfverfahren - Absetzbarkeit der Beschichtung
(IEC 60793-1-32:2018)Fibres optiques - Partie 1-32: Méthodes de mesure et procédures d'essai - Dénudabilité du revêtement
(IEC 60793-1-32:2018)Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability (IEC 60793-1-32:2018)33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN IEC 60793-1-32:2018SIST EN IEC 60793-1-32:2019en01-marec-2019SIST EN IEC 60793-1-32:2019SLOVENSKI
STANDARDSIST EN 60793-1-32:20101DGRPHãþD
SIST EN IEC 60793-1-32:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 60793-1-32
December 2018 ICS 33.180.10
Supersedes
EN 60793-1-32:2010
English Version
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability (IEC 60793-1-32:2018)
Fibres optiques - Partie 1-32: Méthodes de mesure et procédures d'essai - Dénudabilité du revêtement (IEC 60793-1-32:2018)
Lichtwellenleiter - Teil 1-32: Messmethoden und Prüfverfahren - Absetzbarkeit der Beschichtung (IEC 60793-1-32:2018) This European Standard was approved by CENELEC on 2018-12-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60793-1-32:2018 E SIST EN IEC 60793-1-32:2019
EN IEC 60793-1-32:2018 (E) 2 European foreword The text of document 86A/1890/FDIS, future edition 3 of IEC 60793-1-32, prepared by SC 86A "Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60793-1-32:2018. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-09-21 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-12-21
This document supersedes EN 60793-1-32:2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60793-1-32:2018 was approved by CENELEC as a European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60793-2-10 NOTE Harmonized as EN 60793-2-10 IEC 60793-2-20 NOTE Harmonized as EN 60793-2-20 IEC 60793-2-30 NOTE Harmonized as EN 60793-2-30 IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50 IEC 60793-2-60 NOTE Harmonized as EN 60793-2-60
SIST EN IEC 60793-1-32:2019
EN IEC 60793-1-32:2018 (E) 3 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60793-1-1 - Optical fibres – Part 1-1: Measurement methods and test procedures – General and guidance EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.