EN 61334-4-512:2002

SLOVENSKI STANDARD
01-maj-2004
Distribution automation using distribution line carrier systems - Part 4-512: Data
communication protocols - System management using profile 61334-5-1 -
Management Information Base (MIB) (IEC 61334-4-512:2001)
Distribution automation using distribution line carrier systems -- Part 4-512: Data
communication protocols - System management using profile 61334-5-1 - Management
Information Base (MIB)
Verteilungsautomatisierung mit Hilfe von Trägersystemen auf Verteilungsleitungen -- Teil
4-512: Datenkommunikationsprotokolle - Systemverwaltung bei Anwendung des Profils
nach IEC 61334-5-1 - Management-Informationsbasis (MIB)
Automatisation de la distribution à l'aide de systèmes de communication à courants
porteurs -- Partie 4-512: Protocoles de communication de données - Administration de
systèmes à l'aide du profil 61334-5-1 - MIB (Base d'Informations d'Administration)
Ta slovenski standard je istoveten z: EN 61334-4-512:2002
ICS:
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61334-4-512
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2002
ICS 33.200
English version
Distribution automation using distribution line carrier systems
Part 4-512: Data communication protocols –
System management using profile 61334-5-1 –
Management Information Base (MIB)
(IEC 61334-4-512:2001)
Automatisation de la distribution Verteilungsautomatisierung mit Hilfe von
à l'aide de systèmes de Trägersystemen auf Verteilungsleitungen
communication à courants porteurs Teil 4-512: Datenkommunikations-
Partie 4-512: Protocoles de protokolle –
communication de données - Systemverwaltung bei Anwendung
Administration de systèmes à l'aide des Profils nach IEC 61334-5-1 -
du profil 61334-5-1 - MIB Management-Informationsbasis (MIB)
(Base d'Informations d'Administration) (IEC 61334-4-512:2001)
(CEI 61334-4-512:2001)
This European Standard was approved by CENELEC on 2002-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61334-4-512:2002 E

Foreword
The text of document 57/544/FDIS, future edition 1 of IEC 61334-4-512, prepared by IEC TC 57,
Power system control and associated communications, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 61334-4-512 on 2002-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-02-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61334-4-512:2001 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61334-4-512:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61334-4-1 1996 Distribution automation using EN 61334-4-1 1996
distribution line carrier systems
Part 4: Data communication protocols --
Section 1: Reference model of the
communication system
IEC 61334-4-32 1996 Part 4: Data communication protocols -- EN 61334-4-32 1996
Section 32: Data link layer - Logical link
control (LLC)
IEC 61334-4-41 1996 Part 4: Data communication protocols -- EN 61334-4-41 1996
Section 41: Application protocols -
Distribution line message specification
IEC 61334-4-42 1996 Part 4: Data communication protocols -- EN 61334-4-42 1996
Section 42: Application protocols -
Application layer
IEC 61334-4-511 2000 Part 4-511: Data communication EN 61334-4-511 2000
protocols - Systems management -
CIASE protocol
IEC 61334-5-1 2001 Part 5-1: Lower layer profiles - The EN 61334-5-1 2001
spread frequency shift keying (S-FSK)
profile
ISO/IEC 7498-1 1994 Information technology - Open systems EN ISO/IEC 7498-1 1995
interconnection - Basic reference model
Part 1: The basic model
ISO/IEC 7498-3 1997 Part 3: Naming and addressing - -
ISO/IEC 7498-4 1989 Part 4: Management framework - -
ISO/IEC 8509 1987 Information processing systems - Open--
Systems Interconnection - Service
conventions
ISO/IEC 9545 1994 Information technology - Open Systems--
Interconnection - Application Layer
structure
NORME CEI
INTERNATIONALE IEC
61334-4-512
INTERNATIONAL
Première édition
STANDARD
First edition
2001-10
Automatisation de la distribution à l'aide de
systèmes de communication à courants porteurs –
Partie 4-512:
Protocoles de communication de données –
Administration de systèmes à l'aide
du profil 61334-5-1 –
MIB (Base d'Informations d'Administration)
Distribution automation using
distribution line carrier systems –
Part 4-512:
Data communication protocols –
System management using profile 61334-5-1 –
Management Information Base (MIB)
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
T
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61334-4-512 © IEC:2001 – 3 –
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references.7
3 Definitions .9
4 Abbreviations.13
5 Management Information Base (MIB) .15
5.1 General types definition .17
5.2 MIB objects linked to Physical Management Variables.19
5.3 MIB objects linked to MAC Management Variables .21
5.4 MIB objects linked to LLC Management Variables .27
5.5 MIB objects linked to ACSE Management Variables .29
5.6 MIB objects linked to Application Management Variables.31
5.7 MIB System Objects .33
5.8 Other MIB Objects .33
5.9 Summary.43

61334-4-512 © IEC:2001 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DISTRIBUTION AUTOMATION USING
DISTRIBUTION LINE CARRIER SYSTEMS –
Part 4-512: Data communication protocols –
System management using profile 61334-5-1 –
Management Information Base (MIB)
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61334-4-512 has been prepared by IEC technical committee 57:
Power system control and associated communications.
The text of this standard is based on the following documents:
FDIS Report on voting
57/544/FDIS 57/562/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged
until 2004. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
61334-4-512 © IEC:2001 – 7 –
DISTRIBUTION AUTOMATION USING
DISTRIBUTION LINE CARRIER SYSTEMS –
Part 4-512: Data communication protocols –
System management using profile 61334-5-1 –
Management Information Base (MIB)
1 Scope
This part of IEC 61334 specifies the DCP Management Information Base (MIB). This MIB is
used for the management of the communication profile defined by the following standards:
IEC 61334-5-1 (Physical and MAC sublayer), IEC 61334-4-32 (LLC sublayer), IEC 61334-4-42
(Application protocols), and IEC 61334-4-41 (DLMS).
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 61334-4-1:1996, Distribution automation using distribution line carrier systems – Part 4:
Data communication protocols – Section 1: Reference model of the communication system
IEC 61334-4-32:1996, Distribution automation using distribution line carrier systems – Part 4:
Data communication protocols – Section 32: Data link layer – Logical link control (LLC)
IEC 61334-4-41:1996, Distribution automation using distribution line carrier systems – Part 4:
Data communication protocols – Section 41: Application protocols – Distribution line message
specification
IEC 61334-4-42:1996, Distribution automation u
...