EN 60317-42:1997/A1:2010

SLOVENSKI STANDARD
01-september-2010
Specifikacije za posebne tipe navitij - 42. del: S poliester-amid-imidom emajliran
bakren okrogel vodnik, razred 200 (IEC 60317-42:1997/A1:2010)
Specifications for particular types of winding wires - Part 42: Polyester-amide-imide
enamelled round copper wire, class 200 (IEC 60317-42:1997/A1:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 42:
Runddrähte aus Kupfer, lackisoliert mit Polyesteramid-imid, Klasse 200 (IEC 60317-
42:1997/A1:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 42: Fil de section
circulaire en cuivre émaillé avec polyester-amideimide, classe 200 (CEI 60317-
42:1997/A1:2010)
Ta slovenski standard je istoveten z: EN 60317-42:1997/A1:2010
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60317-42/A1
NORME EUROPÉENNE
March 2010
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 42: Polyester-amide-imide enamelled round copper wire, class 200
(IEC 60317-42:1997/A1:2010)
Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 42: Fil de section circulaire Teil 42: Runddrähte aus Kupfer,
en cuivre émaillé avec polyester-amide- lackisoliert mit Polyesteramid-imid,
imide, classe 200 Klasse 200
(CEI 60317-42:1997/A1:2010) (IEC 60317-42:1997/A1:2010)

This amendment A1 modifies the European Standard EN 60317-42:1997; it was approved by CENELEC on
2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-42:1997/A1:2010 E

Foreword
The text of document 55/1128/CDV, future amendment 1 to IEC 60317-42:1997, prepared by IEC TC 55,
Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
amendment A1 to EN 60317-42:1997 on 2010-03-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop)
...