FprEN 13863-5

SLOVENSKI STANDARD
oSIST prEN 13863-5:2022
01-marec-2022
Betonska vozišča - 5. del: Določanje sprijemne napetosti moznikov v betonskih
voziščnih konstrukcijah
Concrete pavements - Part 5: Determination of the bond stress of dowels to be used in
concrete pavements
Fahrbahnbefestigungen aus Beton - Teil 5: Bestimmung der Bindungsspannung von
Dübeln für Fahrbahnbefestigungen aus Beton
Chaussées en béton - Partie 5 : Détermination de la contrainte d'adhérence de goujons
à utiliser dans les chaussées en béton
Ta slovenski standard je istoveten z: prEN 13863-5
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13863-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13863-5:2022

---------------------- Page: 2 ----------------------
oSIST prEN 13863-5:2022


DRAFT
EUROPEAN STANDARD
prEN 13863-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2022
ICS 93.080.20
English Version

Concrete pavements - Part 5: Determination of the bond
stress of dowels to be used in concrete pavements
Chaussées en béton - Partie 5 : Détermination de la Fahrbahnbefestigungen aus Beton - Teil 5:
contrainte d'adhérence de goujons à utiliser dans les Bestimmung der Bindungsspannung von Dübeln für
chaussées en béton Fahrbahnbefestigungen aus Beton
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13863-5:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13863-5:2022
prEN 13863-5:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and symbols . 4
3.1 Terms and definitions . 4
3.2 Symbols . 4
4 Principle . 5
5 Apparatus . 5
5.1 Apparatus for production of the test specimens . 5
5.2 Load equipment .
...