EN 792-4:2000
(Main)Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a suspension, e.g. a balancer. This part, EN 792-4, applies to non-electric power tools used for chipping, riveting, breaking of concrete and asphalt, ramming etc. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime.
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 4: Nicht drehende, schlagende Maschinen
Diese Norm EN 792 gilt für handgehaltene nicht-elektrisch betriebene Maschinen, die durch Motore mit drehender oder linearer Bewegung angetrieben werden, wobei die Energie aus Druckluft oder über Hydraulikflüssigkeit bezogen werden kann. Die Maschinen sind dazu bestimmt, durch eine Person verwendet und - mit einer oder beiden Händen gehalten, - in einer Halterung, z.B. Aufhängevorrichtung, aufgenommen zu werden. Dieser Teil, EN 792-4, gilt für handgehaltene nicht-elektrisch betriebene Maschinen zum Meißeln, Nieten, Aufbrechen von Beton oder Asphalt, Hämmern usw.
Machines portatives à moteur non électrique - Prescriptions de sécurité - Partie 4: Machines portatives non rotatives à percussion
La norme EN 792 s'applique aux machines portatives non électriques entraînées par des moteurs rotatifs ou linéaires, alimentés par air comprimé, fluide hydraulique et prévues pour être utilisées par un seul opérateur et portée par: - la ou les main(s) de l'opérateur, - en suspension, p.e. à l'aide d'un équilibreur. Cette partie, EN 792-4, s'applique aux machines portatives non électriques utilisées pour buriner, river, briser le béton et l'asphalte, dammer, etc.; elle spécifie les prescriptions de sécurité qui s'y rapportent.
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jun-2000
- Withdrawal Date
- 09-Sep-2008
- Technical Committee
- CEN/TC 255 - Hand-held, non-electric power tools - Safety
- Drafting Committee
- CEN/TC 255 - Hand-held, non-electric power tools - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Sep-2008
- Completion Date
- 10-Sep-2008
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 792-4:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools". This standard covers: The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a suspension, e.g. a balancer. This part, EN 792-4, applies to non-electric power tools used for chipping, riveting, breaking of concrete and asphalt, ramming etc. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime.
The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a suspension, e.g. a balancer. This part, EN 792-4, applies to non-electric power tools used for chipping, riveting, breaking of concrete and asphalt, ramming etc. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime.
EN 792-4:2000 is classified under the following ICS (International Classification for Standards) categories: 25.140.10 - Pneumatic tools; 25.140.99 - Other hand-held tools. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 792-4:2000 has the following relationships with other standards: It is inter standard links to EN 792-4:2000+A1:2008, EN ISO 11148-4:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 792-4:2000 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 792-4:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary
percussive power tools
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive
power tools
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
4: Nicht drehende, schlagende Maschinen
Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 4:
Machines portatives non rotatives a percussion
Ta slovenski standard je istoveten z: EN 792-4:2000
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
--------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...