prEN 12369-1
(Main)Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995 1 1.
This document includes the characteristic values of both the mechanical properties and density for the panels set out below:
- OSB/2, OSB/3 and OSB/4, complying with EN 300;
- Particleboard, P4, P5 P6, P7 complying with EN 312;
- Hardboard, HB.HLA2 complying with EN 622 2;
- Medium board, MBH.LA2 complying with EN 622 3;
- MDF.LA and MDF.HLS complying with EN 622 5;
- MDF.RWH complying with EN 622 5.
Holzwerkstoffe - Charakteristiche Werte für die Berechnung und Bemessung von Holzbauwerken - Teil 1: OSB, Spanplatten und Faserplatten
Dieses Dokument gibt Informationen über charakteristische Werte für die Berechnung und Bemessung von Bauwerken, in denen Holzwerkstoffe eingesetzt werden. Die angegebenen charakteristischen Werte entsprechen den Definitionen in EN 1995 1 1.
Dieses Dokument enthält die charakteristischen Werte der mechanischen Eigenschaften und der Rohdichte der im Folgenden aufgeführten Plattentypen:
- OSB/2, OSB/3 und OSB/4 nach EN 300;
- Spanplatten P4, P5, P6, P7 nach EN 312;
- Hartfaserplatten HB.HLA2 nach EN 622 2;
- Mittelharte Faserplatten MBH.LA2 nach EN 622 3;
- MDF.LA und MDF.HLS nach EN 622 5.
- MDF.RWH nach EN 622 5.
Panneaux à base de bois - Valeurs caractéristiques pour la conception des structures - Partie 1: OSB, panneaux de particules et panneaux de fibres
Le présent document donne des informations sur les valeurs caractéristiques à utiliser dans la conception des structures incorporant des panneaux à base de bois. Les valeurs caractéristiques données sont telles que définies dans l'EN 1995 1 1.
Le présent document inclut les valeurs caractéristiques des propriétés mécaniques et de la masse volumique des panneaux indiqués ci-dessous :
- OSB/2, OSB/3 et OSB/4 conformes à l'EN 300 ;
- panneaux de particules P4, P5, P6, P7 conformes à l'EN 312 ;
- panneaux durs, HB.HLA2 conformes à l'EN 622 2 ;
- panneaux mi-durs, MBH.LA2 conformes à l'EN 622 3 ;
- MDF.LA et MDF.HLS conformes à l'EN 622 5 ;
- MDF.RWH conforme à l'EN 622 5.
Lesne plošče - Karakteristične vrednosti za konstrukcijsko načrtovanje - 1. del: OSB, iverne in vlaknene plošče
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12369-1:2024
01-julij-2024
Lesne plošče - Karakteristične vrednosti za konstrukcijsko načrtovanje - 1. del:
OSB, iverne in vlaknene plošče
Wood-based panels - Characteristic values for structural design - Part 1: OSB,
particleboards and fibreboards
Holzwerkstoffe - Charakteristiche Werte für die Berechnung und Bemessung von
Holzbauwerken - Teil 1: OSB, Spanplatten und Faserplatten
Panneaux à base de bois - Valeurs caractéristiques pour la conception des structures -
Partie 1: OSB, panneaux de particules et panneaux de fibres
Ta slovenski standard je istoveten z: prEN 12369-1
ICS:
79.060.20 Vlaknene in iverne plošče Fibre and particle boards
oSIST prEN 12369-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12369-1:2024
---------------------- Page: 2 ----------------------
oSIST prEN 12369-1:2024
DRAFT
EUROPEAN STANDARD
prEN 12369-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 79.060.20 Will supersede EN 12369-1:2001
English Version
Wood-based panels - Characteristic values for structural
design - Part 1: OSB, particleboards and fibreboards
Panneaux à base de bois - Valeurs caractéristiques Holzwerkstoffe - Charakteristiche Werte für die
pour la conception des structures - Partie 1: OSB, Berechnung und Bemessung von Holzbauwerken - Teil
panneaux de particules et panneaux de fibres 1: OSB, Spanplatten und Faserplatten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 112.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12369-1:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12369-1:2024
prEN 12369-1:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and symbols . 4
3.1 Terms and definitions . 4
3.1.1 Characteristic values . 5
3.1.2 Service classes . 5
3.2 Symbols . 6
3.2.1 Main symbols . 6
3.2.2 Subscripts .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.