EN 792-1:2000
(Main)Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a harness - a suspension, e.g. a balancer. This part, EN 792-1, applies to hand-held non-electric power tools for the installation, tightening or removal of both break stem and non-break stem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials.
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 1: Maschinen für gewindelose mechanische Befestigungen
Diese Norm EN 792 gilt für handgehaltene nicht-elektrisch betriebene Maschinen, die durch Motore mit drehender oder linearer Bewegung angetrieben werden, wobei die Energie aus Druckluft oder über Hydraulikflüssigkeit bezogen werden kann. Die Maschinen sind dazu bestimmt, durch eine Person verwendet und - mit einer oder beiden Händen gehalten, - in einer Halterung, z.B. Aufhängevorrichtung, aufgenommen zu werden.
Machines portatives à moteur non électrique - Prescriptions de sécurité - Partie 1: Machines portatives de pose d'éléments de fixation non-filetés
La norme EN 792 s'applique aux machines portatives non électriques entraînées par des moteurs rotatifs ou linéaires, alimentés par air comprimé, fluide hydraulique et prévues pour être utilisées par une seule personne et portée par: - la ou les main(s) de l'opérateur, - un harnais, - en suspension, p.e. un équilibreur. Cette partie, EN 792-1, s'applique aux machines portatives non électriques pour la pose, le serrage ou la dépose de rivets, vis, chevilles et fixations, pré-cassés ou non, sur une face d'une pièce en métal, plastique et autres matériaux.
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jun-2000
- Withdrawal Date
- 09-Sep-2008
- Technical Committee
- CEN/TC 255 - Hand-held, non-electric power tools - Safety
- Drafting Committee
- CEN/TC 255 - Hand-held, non-electric power tools - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Sep-2008
- Completion Date
- 10-Sep-2008
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 19-Jan-2023
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 792-1:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners". This standard covers: The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a harness - a suspension, e.g. a balancer. This part, EN 792-1, applies to hand-held non-electric power tools for the installation, tightening or removal of both break stem and non-break stem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials.
The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a harness - a suspension, e.g. a balancer. This part, EN 792-1, applies to hand-held non-electric power tools for the installation, tightening or removal of both break stem and non-break stem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials.
EN 792-1:2000 is classified under the following ICS (International Classification for Standards) categories: 25.140.10 - Pneumatic tools; 25.140.99 - Other hand-held tools. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 792-1:2000 has the following relationships with other standards: It is inter standard links to EN 792-1:2000+A1:2008; is excused to EN 792-2:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 792-1:2000 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 792-1:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fastenersHandgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 1: Maschinen für gewindelose mechanische BefestigungenMachines portatives a moteur non électrique - Prescriptions de sécurité - Partie 1: Machines portatives de pose d'éléments de fixation non-filetésHand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...