iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 7719:2012/AC:2013

(Corrigendum)

Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)

Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)

ISO corrigendum.

Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 1 - Festigkeitsklassen 5, 8 und 10 (ISO 7719:2012/Cor 1:2013)

Écrous hexagonaux normaux autofreinés tout métal - Classes de qualité 5, 8 et 10 - Rectificatif technique 1 (ISO 7719:2012/Cor 1:2013)

Šestrobe zaščitne matice z deformacijo, tip 1 - Razredi trdnosti 5, 8 in 10 (ISO 7719:2012/Cor 1:2013)

Standard ISO 7719:2012 določa značilnosti običajnih šestrobih zaščitnih matic z deformacijo z navoji od M5 do vključno M36, v razredu izdelave A za navoje do vključno M16 in v razredu izdelave B za navoje nad M16, ter z razredi trdnosti 5, 8 in 10.

General Information

Status
Published
Publication Date
28-May-2013
ICS
21.060.20 - Nuts
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-May-2013
Completion Date
29-May-2013
Ref Project
SIST EN ISO 7719:2014/AC:2014 - Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)

Relations

Corrects
EN ISO 7719:2012 - Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
Effective Date
20-Feb-2013
Revised
prEN ISO 7719 - Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal) (ISO/DIS 7719:2024)
Effective Date
18-Jan-2023

Buy Standard

EN ISO 7719:2014/AC:2014EN ISO 7719:2014/AC:2014
PreviousNext
Corrigendum
EN ISO 7719:2014/AC:2014
French language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 1 - Festigkeitsklassen 5, 8 und 10 (ISO 7719:2012/Cor 1:2013)Écrous hexagonaux normaux autofreinés tout métal - Classes de qualité 5, 8 et 10 - Rectificatif technique 1 (ISO 7719:2012/Cor 1:2013)Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)21.060.20MaticeNutsICS:Ta slovenski standard je istoveten z:EN ISO 7719:2012/AC:2013SIST EN ISO 7719:2014/AC:2014fr01-junij-2014SIST EN ISO 7719:2014/AC:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7719:2012/AC
May 2013
Mai 2013
Mai 2013 ICS 21.060.20 English version Version Française Deutsche Fassung
Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)
Écrous hexagonaux normaux autofreinés tout métal - Classes de qualité 5, 8 et 10 - Rectificatif technique 1 (ISO 7719:2012/Cor 1:2013)
Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 1 - Festigkeitsklassen 5, 8 und 10 (ISO 7719:2012/Cor 1:2013) This corrigendum becomes effective on 29 May 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 29 mai 2013 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 29. Mai 2013 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres na
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 4033:2023(Main)
Fasteners - Hexagon high nuts (style 2) (ISO 4033:2023)
SIST EN ISO 4033:2023

This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8673:2023(Main)
Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)
SIST EN ISO 8673:2023

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
NOTE       For nuts with sizes D > 39 mm, see Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8674:2023(Main)
Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO 8674:2023)
SIST EN ISO 8674:2023

This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8675:2023(Main)
Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)
SIST EN ISO 8675:2023

This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric fine pitch thread 8 mm to 64 mm, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4035:2023(Main)
Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)
SIST EN ISO 4035:2023

This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric coarse pitch thread M1,6 to M64, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4032:2023(Main)
Fasteners - Hexagon regular nuts (style 1) (ISO 4032:2023)
SIST EN ISO 4032:2023

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE            For nuts with sizes D < M5 and D > M39, see Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-2:2022(Main)
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)
SIST EN ISO 898-2:2022

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature range of 10 °C to 35 °C.
This document applies to nuts:
—    with ISO metric thread (see ISO 68-1),
—    with diameter/pitch combinations according to ISO 261 and ISO 262,
—    with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3,
—    with thread tolerances according to ISO 965-1, ISO 965-2 or ISO 965-5,
—    with specified property classes 04, 05, 5, 6, 8, 10 and 12 including proof load,
—    of three different nut styles (see 5.1): regular nuts (style 1), high nuts (style 2) and thin nuts (style 0),
—    with a minimum outside diameter or width across flats s ≥ 1,45D,
—    able to mate with bolts, screws and studs with property classes in accordance with ISO 898-1 (see Annex B), and
—    intended to be used in applications ranging from –50 °C to +150 °C, or up to +300 °C.
WARNING — Nuts conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in applications ranging from –50 °C to +150 °C; however, these nuts are also used outside this range and up to +300 °C for specific applications. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on the service environment conditions of the assembly (see also 7.1).
For additional specifications applicable to hot dip galvanized nuts, see ISO 10684.
For nuts designed for particular applications, see ISO/TR 16224.
This document does not specify requirements for functional properties such as:
—    prevailing torque properties (see ISO 2320),
—    torque/clamp force properties (see ISO 16047 for test method),
—    weldability, or
—    corrosion resistance.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-3:2018/A1:2021(Amendment)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
SIST EN ISO 898-3:2018/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3506-2:2020(Main)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
SIST EN ISO 3506-2:2020

This document specifies the mechanical and physical properties of nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for nuts.
ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties.
Nuts conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures.
NOTE 1  Fasteners conforming to the requirements of this document are used without restriction in applications ranging from ?20 °C to +150 °C; however, fasteners conforming to this document are also used for applications outside this range down to ?196 °C and up to +300 °C. For more details, see ISO 3506-6.
Outside the temperature range of ?20 °C to +150 °C, it is the responsibility of the user to determine the appropriate choice for a given application, in consultation with an experienced fastener metallurgist and by taking into account e.g. stainless steel composition, duration of exposure at elevated or low temperature, the effect of the temperature on the fastener mechanical properties and clamped parts, and the corrosive service environment of the bolted joint.
NOTE 2  ISO 3506‑5[1] is developed in order to assist in the selection of appropriate stainless steel grades and property classes intended for use at temperatures up to +800 °C.
This document applies to nuts:
—     with ISO metric thread in accordance with ISO 68‑1,
—     with diameter/pitch combinations in accordance with ISO 261 and ISO 262,
—     with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3,
—     with thread tolerances in accordance with ISO 965‑1 and ISO 965‑2,
—     with specified property classes, including proof load,
—     with different nut styles: thin nuts, regular nuts and high nuts,
—     with a minimum nut height m ≥ 0,45D,
—     with a minimum outside diameter or width across flats s ≥ 1,45D (see Annex A),
—     of any shape, and
—     able to mate with bolts, screws and studs with property classes in accordance with ISO 3506‑1.
Stainless steel grades and property classes can be used for sizes outside the diameter limits of this document (i.e. for D < 5 mm or D > 39 mm), provided that all applicable chemical, mechanical and physical requirements are met.
This document does not specify requirements for functional properties such as:
—     torque/clamp force properties,
—     prevailing torque properties, or
—     weldability.
[1] Under preparation.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-3:2018(Main)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
SIST EN ISO 898-3:2018

This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898‑1 and ISO 898‑2.
NOTE 1    These types of washers can also be used with other fasteners such as screws forming their own mating thread.
Washers that conform to the requirements of this document are evaluated at an ambient temperature range of 10 °C to 35 °C. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures.
NOTE 2    Washers conforming to the requirements of this document are used in applications ranging from −50 °C to +150 °C. Users are advised to consult an experienced fastener expert for temperatures outside this range and up to a maximum temperature of +300 °C when determining appropriate choices, or for critical applications.
This document is applicable to the following flat captive and non-captive washers made of carbon steel or alloy steel, with thickness from 0,2 mm to 12 mm:
—          plain washers (with or without knurls, ribs or chamfers);
—          square washers;
—          square hole washers;
—          shaped plates.
It does not specify requirements for the following properties:
—          corrosion resistance;
—          weldability.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day