prEN 3841-101

SLOVENSKI STANDARD
oSIST prEN 3841-101:2023
01-september-2023
Aeronavtika - Odklopniki - Preskusne metode - Del 101: Upravljanje ohranjanja
kvalifikacij
Aerospace series - Circuit breakers - Test methods - Part 101: Management of the
retention of qualification
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 101: Management des
Erhalts der Qualifikation
Série aérospatiale - Disjoncteurs - Méthodes d’essais - Partie 101: Gestion du maintien
de la qualification
Ta slovenski standard je istoveten z: prEN 3841-101
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3841-101:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3841-101:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3841-101:2023


DRAFT
EUROPEAN STANDARD
prEN 3841-101
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 49.060
English Version

Aerospace series - Circuit breakers - Test methods - Part
101: Management of the retention of qualification
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Luft- und Raumfahrt - Schutzschalter - Prüfverfahren -
Partie 101: Gestion du maintien de la qualification Teil 101: Management des Erhalts der Qualifikation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 384
...