EN 792-9:2001
(Main)Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
The standard, EN 792, applies to non-electric hand-held power tools intended to be used in operation by one person using one or both hands, where the weight of the power tool is supported by the operator or by a harness or suspended e.g. by a balancer. The power tools driven by rotary or linear motors powered by compressed air, hydraulic fluid or gaseous or liquid fuel or stored energy (e.g. by a string). Electrically driven tools are not intended. The standard lists the significant hazards caused by hand-held power tools.
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 9: Schleifmaschinen für Schleifstifte
Diese Norm, EN 792, gilt für handgehaltene, nicht-elektrisch betriebene Maschinen, die dazu bestimmt sind, beim Arbeiten von einer Person mit einer oder beiden Händen gehalten zu werden. Dabei wird das Gewicht der Maschine von der Bedienperson getragen oder kann von einer Halterung oder z.B. durch eine Aufhängevorrichtung aufgenommen werden. Die Maschinen werden durch Motore mit drehender oder linearen Bewegung angetrieben. Die Engergie kann aus Druckluft, über Hydraulikflüssigkeit, gasförmigen oder flüssigen Brennstoffen oder gespeicherter Energie, wie z.B. gespannten Federn, bezogen werden.
Machines portatives à moteur non électrique - Prescriptions de sécurité - Partie 9: Meuleuses d'outillage
La norme EN 792 s'applique aux machines portatives non électriques prévues pour être utilisées par une seule personne à l'aide d'une ou de deux mains; la machine portative est portée par l'opérateur, éventuellement à l'aide d'un harnais, ou est suspendue, par exemple à l'aide d'un équilibreur. Les machines portatives sont entraînées par des moteurs rotatifs ou linéaires, alimentés par air comprimé, fluide hydraulique, carburants gazeux ou liquides ou énergie stockée (par exemple par un ressort). Les machines portatives électriques sont exclues.
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
General Information
- Status
- Withdrawn
- Publication Date
- 06-Feb-2001
- Withdrawal Date
- 09-Sep-2008
- Technical Committee
- CEN/TC 255 - Hand-held, non-electric power tools - Safety
- Drafting Committee
- CEN/TC 255 - Hand-held, non-electric power tools - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Sep-2008
- Completion Date
- 10-Sep-2008
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 22-Dec-2008
- Replaces
EN 68:1977/A1:1978 - Hand-held (portable) power driven grinding machines - Mechanical safety - Effective Date
- 22-Dec-2008
- Effective Date
- 19-Jan-2023
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 792-9:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders". This standard covers: The standard, EN 792, applies to non-electric hand-held power tools intended to be used in operation by one person using one or both hands, where the weight of the power tool is supported by the operator or by a harness or suspended e.g. by a balancer. The power tools driven by rotary or linear motors powered by compressed air, hydraulic fluid or gaseous or liquid fuel or stored energy (e.g. by a string). Electrically driven tools are not intended. The standard lists the significant hazards caused by hand-held power tools.
The standard, EN 792, applies to non-electric hand-held power tools intended to be used in operation by one person using one or both hands, where the weight of the power tool is supported by the operator or by a harness or suspended e.g. by a balancer. The power tools driven by rotary or linear motors powered by compressed air, hydraulic fluid or gaseous or liquid fuel or stored energy (e.g. by a string). Electrically driven tools are not intended. The standard lists the significant hazards caused by hand-held power tools.
EN 792-9:2001 is classified under the following ICS (International Classification for Standards) categories: 25.140.10 - Pneumatic tools; 25.140.99 - Other hand-held tools. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 792-9:2001 has the following relationships with other standards: It is inter standard links to EN 68:1977, EN 68:1977/A1:1978, EN 792-9:2001+A1:2008, EN ISO 11148-9:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 792-9:2001 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 792-9:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2001
1DGRPHãþD
SIST EN 68:2000
SIST EN 68:2000/A1:2000
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
9: Schleifmaschinen für Schleifstifte
Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 9:
Meuleuses d'outillage
Ta slovenski standard je istoveten z: EN 792-9:2001
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...