EN 957-5:1996
(Main)Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
This part of EN 957 specifies safety requirements for pedal crank training equipment in addition to the general safety requirements of prEN 957-1. This part of EN 957 is applicable to stationary training equipment type pedal crank training equipment (type 5) as defined in clause 3 within the classes S, H and A, B, C. Any attachment provided with the pedal crank training equipment for the performance of additional exercises are subject to the requirements of prEN 957-1. This part of EN 957 is not applicable to roller stands as they cannot be made in a reasonable way.
Stationäre Trainingsgeräte - Teil 5: Tretkurbel-Trainingsgeräte, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren
Dieser Teil der EN 957 legt sicherheitstechnische Anforderungen für Tretkurbel-Trainingsgeräte zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach prEN 957-1 fest. Dieser Teil der EN 957 gilt für stationäre Trainingsgeräte vom Typ Tretkurbel-Trainingsgeräte (Typ 5), wie im Abschnitt 3 definiert, der Klassen S, H, und A, B, C. Für alle Zusatzgeräte, die mit dem Tretkurbel- Trainingsgerät zur Durchführung von zusätzlichen Übungen geliefert werden, gelten die Anforderungen nach prEN 957-1.
Appareils d'entraînement fixes - Partie 5: Appareils d'entraînement à pédales, exigences spécifiques de sécurité et méthodes d'essai supplémentaires
Cette partie de l'EN 957 précise les exigences de sécurité relatives aux appareils d'entraînement à pédales, et complète les exigences de sécurité élémentaires du prEN 957-1. Elle s'applique aux appareils d'entraînement fixes à pédales (type 5), définis dans l'article 3, des classes S, H et A, B, C. Les accessoires fournis avec les appareils d'entraînement à pédales pour permettre l'exécution d'exercices supplémentaires, répondent aux exigences du prEN 957-1. La présente partie de l'EN 957 n'est pas applicable aux bâtis à tambours de roulements car leur sécurité ne peut être assurée de façon raisonnable.
Nepremična oprema za vadbo - 5. del: Oprema za vadbo s pedalnimi gonili, dodatne posebne zahteve in preskusne metode
General Information
- Status
- Withdrawn
- Publication Date
- 21-May-1996
- Withdrawal Date
- 10-Feb-2009
- Technical Committee
- CEN/TC 136 - Sports, playground and other recreational equipment
- Drafting Committee
- CEN/TC 136/WG 4 - Stationary training equipment
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Feb-2009
- Completion Date
- 11-Feb-2009
- Directive
- 2001/95/EC - General product safety
Relations
- Effective Date
- 17-Feb-2009
Frequently Asked Questions
EN 957-5:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods". This standard covers: This part of EN 957 specifies safety requirements for pedal crank training equipment in addition to the general safety requirements of prEN 957-1. This part of EN 957 is applicable to stationary training equipment type pedal crank training equipment (type 5) as defined in clause 3 within the classes S, H and A, B, C. Any attachment provided with the pedal crank training equipment for the performance of additional exercises are subject to the requirements of prEN 957-1. This part of EN 957 is not applicable to roller stands as they cannot be made in a reasonable way.
This part of EN 957 specifies safety requirements for pedal crank training equipment in addition to the general safety requirements of prEN 957-1. This part of EN 957 is applicable to stationary training equipment type pedal crank training equipment (type 5) as defined in clause 3 within the classes S, H and A, B, C. Any attachment provided with the pedal crank training equipment for the performance of additional exercises are subject to the requirements of prEN 957-1. This part of EN 957 is not applicable to roller stands as they cannot be made in a reasonable way.
EN 957-5:1996 is classified under the following ICS (International Classification for Standards) categories: 97.220.30 - Indoor sports equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 957-5:1996 has the following relationships with other standards: It is inter standard links to EN 957-5:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 957-5:1996 is associated with the following European legislation: EU Directives/Regulations: 2001/95/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 957-5:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-1998
1HSUHPLþQDRSUHPD]DYDGERGHO 2SUHPD]DYDGERVSHGDOQLPLJRQLOL
GRGDWQHSRVHEQH]DKWHYHLQSUHVNXVQHPHWRGH
Stationary training equipment - Part 5: Pedal crank training equipment, additional specific
safety requirements and test methods
Stationäre Trainingsgeräte - Teil 5: Tretkurbel-Trainingsgeräte, zusätzliche besondere
sicherheitstechnische Anforderung
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...