prEN 15698-1
(Main)District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
This document specifies requirements and test methods for straight lengths of factory made thermally insulated bonded twin pipe assemblies for directly buried hot water networks in accordance with EN 13941-1, comprising two steel service pipes, polyurethane (PUR) foam thermal insulation and a casing of polyethylene.
The twin pipe assembly can also include the following additional elements: Measuring wires, spacers and diffusion barriers.
Fernwärmerohre - Doppelrohr-Verbundsysteme für direkt erdverlegte Fernwärmenetze - Teil 1: Werkmäßig gefertigtes Verbund-Doppelrohrsystem, bestehend aus Stahl-Mediumrohren, einer Wärmedämmung aus Polyurethan und einer Ummantelung aus Polyethylen
Dieses Dokument legt Anforderungen und Prüfverfahren für gerade Abschnitte von werkmäßig gedämmten Doppelverbundrohrbaugruppen für direkt erdverlegte Fernwärmenetzwerke nach EN 13941-1 fest, die aus zwei Stahl-Mediumrohren, einer Schaumstoffwärmedämmung aus Polyurethan (PUR) und einer Ummantelung aus Polyethylen bestehen.
Die Doppelrohrbaugruppe kann darüber hinaus die folgenden zusätzlichen Bauteile umfassen: Messdrähte, Abstandhalter und Diffusionsbarrieren.
Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pré-isolés pour les réseaux d'eau chaude enterrés directement - Partie 1 : Assemblages de bitubes manufacturés pour tube de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
Le présent document définit les exigences et les méthodes d’essais applicables aux longueurs droites d’assemblages de bitubes manufacturés isolés thermiquement pour réseaux d’eau chaude enterrés directement conformément à l’EN 13941-1, comprenant deux tubes de service en acier, une isolation thermique en mousse de polyuréthane (PUR) et une enveloppe en polyéthylène.
L’assemblage de bitubes peut également comprendre les éléments supplémentaires suivants : Des câbles de mesure, des entretoises et les barrières anti-diffusion.
Cevi za daljinsko ogrevanje - Poviti dvocevni sistemi za neposredno vkopana vročevodna omrežja - 1. del: Tovarniško izdelan dvocevni sestav iz jeklene cevi, poliuretanske toplotne izolacije in zunanjega polietilenskega plašča
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15698-1:2023
01-september-2023
Cevi za daljinsko ogrevanje - Poviti dvocevni sistemi za neposredno vkopana
vročevodna omrežja - 1. del: Tovarniško izdelan dvocevni sestav iz jeklene cevi,
poliuretanske toplotne izolacije in zunanjega polietilenskega plašča
District heating pipes - Bonded twin pipe systems for directly buried hot water networks -
Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal
insulation and one casing of polyethylene
Fernwärmerohre - Doppelrohr-Verbundsysteme für direkt erdverlegte Fernwärmenetze -
Teil 1: Werkmäßig gefertigtes Verbund-Doppelrohrsystem, bestehend aus Stahl-
Mediumrohren, einer Wärmedämmung aus Polyurethan und einer Ummantelung aus
Polyethylen
Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pré-isolés pour les réseaux
d'eau chaude enterrés directement - Partie 1 : Assemblages de bitubes manufacturés
pour tube de service en acier, isolation thermique en polyuréthane et tube de protection
en polyéthylène
Ta slovenski standard je istoveten z: prEN 15698-1
ICS:
23.040.07 Cevovodi za daljinsko Pipeline and its parts for
ogrevanje in njihovi deli district heat
23.040.10 Železne in jeklene cevi Iron and steel pipes
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
oSIST prEN 15698-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15698-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN 15698-1:2023
DRAFT
EUROPEAN STANDARD
prEN 15698-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2023
ICS 23.040.07
English Version
District heating pipes - Bonded twin pipe systems for
directly buried hot water networks - Part 1: Factory made
twin pipe assembly of steel service pipes, polyurethane
thermal insulation and one casing of polyethylene
Fernwärmerohre - Verbundmanteldoppelrohre für
direkt erdverlegte Fernwärmenetze - Teil 1:
Werkmäßig gefertigte Verbund-Doppelrohrsystem,
bestehend aus Stahl-Mediumrohr, Polyurethan-
Wärmedämmung und einem Mantel aus Polyethylen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 107.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15698-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15698-1:2023
prEN 15698-1:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.