EN 1989:2000
(Main)Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
This standard specifies a method for determining the long-term sealing performance of joints with thermoplastic elastomer (TPE) seals for plastics piping systems for buried non-pressure sewerage. This method, which estimates the sealing pressure for the seal, is intended to be used only for joints with sealing rings located in a socket.
Rohrleitungen aus thermoplastischen Kunststoffen - Verbindungen für erdverlegte drucklose Kanal-Anwendungen - Prüfverfahren für das Langzeitverhalten von Verbindungen mit thermoplastischen Elastomer (TPE)-Dichtungen durch Abschätzen des Abdichtdruckes
Dieser Standard beschreibt eine Methode zur Bestimmung des Langzeitverhaltens von Dichtungen aus thermoplastischen Elastomeren (TPE) für thermoplastische Rohrsysteme für im Boden verlegte, drucklose Kanalsysteme. Diese Methode, die den Abdichtdruck einer Dichtring abschätzt, ist nur für Verbindungen mit Dichtringen in einer Rohrmuffe vorgesehen.
Systèmes de canalisations en plastiques - Jonctions pour canalisations d'assainissement sans pression et enterrées - Méthode d'essai pour la performance à long terme des assemblages avec bague d'étanchéité en élastomère thermoplastique (TPE) par l'estimation de la pression exercée par le joint
Cette norme spécifie une méthode pour la détermination de la performance à long terme de bagues d'étanchéité en élastomères thermoplastiques (TPE) pour les réseaux de canalisations d'assainissement en plastiques, sans pression et enterrées. Cette méthode, qui estime la pression exercée par le joint, ne doit être utilisée que pour des assemblages avec bague d'étanchéité situées à l'intérieur d'un manchon.
Plastomerni cevni sistemi - Spoji za v zemljo položene kanalizacijske sisteme, ki delujejo po težnostnem principu - Preskusna metoda za ugotavljanje dolgotrajnih tesnilnih lastnosti spojev s plastomernimi elastomernimi tesnili pri oceni tesnilnega tlaka
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 28-Mar-2006
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Mar-2006
- Completion Date
- 29-Mar-2006
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1989:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure". This standard covers: This standard specifies a method for determining the long-term sealing performance of joints with thermoplastic elastomer (TPE) seals for plastics piping systems for buried non-pressure sewerage. This method, which estimates the sealing pressure for the seal, is intended to be used only for joints with sealing rings located in a socket.
This standard specifies a method for determining the long-term sealing performance of joints with thermoplastic elastomer (TPE) seals for plastics piping systems for buried non-pressure sewerage. This method, which estimates the sealing pressure for the seal, is intended to be used only for joints with sealing rings located in a socket.
EN 1989:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.05 - Pipeline and its parts for external sewage systems; 23.040.80 - Seals for pipe and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1989:2000 has the following relationships with other standards: It is inter standard links to EN 14741:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1989:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1989:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastomerni cevni sistemi - Spoji za v zemljo položene kanalizacijske sisteme, ki delujejo po težnostnem principu - Preskusna metoda za ugotavljanje dolgotrajnih tesnilnih lastnosti spojev s plastomernimi elastomernimi tesnili pri oceni tesnilnega tlakaRohrleitungen aus thermoplastischen Kunststoffen - Verbindungen für erdverlegte drucklose Kanal-Anwendungen - Prüfverfahren für das Langzeitverhalten von Verbindungen mit thermoplastischen Elastomer (TPE)-Dichtungen durch Abschätzen des AbdichtdruckesSystemes de canalisations en plastiques - Jonctions pour canalisations d'assainissement sans pression et enterrées - Méthode d'essai pour la perfor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...