EN ISO 15792-2:2020

SLOVENSKI STANDARD
01-november-2020
Nadomešča:
SIST EN ISO 15792-2:2008
Dodajni in pomožni materiali za varjenje - Preskusne metode - 2. del: Priprava
zvarnega spoja in preskušancev za preskus enostranskega in dvostranskega
varjenja jekel (ISO 15792-2:2020)
Welding consumables - Test methods - Part 2: Preparation of single-run and two-run
technique test pieces and specimens in steel (ISO 15792-2:2020)
Schweißzusätze Prüfverfahren - Teil 2: Vorbereitung von Prüfstücken und Proben zur
Prüfung von Einlagen- und Lage/Gegenlage-Schweißungen an Stahl (ISO 15792
2:2020)
Produits consommables pour le soudage - Méthodes d'essai - Partie 2: Préparation de
pièces d'essai et d'éprouvettes en une ou deux passes en acier (ISO 15792-2:2020)
Ta slovenski standard je istoveten z: EN ISO 15792-2:2020
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15792-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2020
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN ISO 15792-2:2008
English Version
Welding consumables - Test methods - Part 2: Preparation
of single-run and two-run technique test pieces and
specimens in steel (ISO 15792-2:2020)
Produits consommables pour le soudage - Méthodes Schweißzusätze Prüfverfahren - Teil 2: Vorbereitung
d'essai - Partie 2: Préparation de pièces d'essai et von Prüfstücken und Proben zur Prüfung von Einlagen-
d'éprouvettes en une ou deux passes en acier (ISO und Lage/Gegenlage-Schweißungen an Stahl (ISO
15792-2:2020) 15792 2:2020)
This European Standard was approved by CEN on 29 August 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15792-2:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15792-2:2020) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall
be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15792-2:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15792-2:2020 has been approved by CEN as EN ISO 15792-2:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 15792-2
Second edition
2020-08
Welding consumables — Test
methods —
Part 2:
Preparation of single-run and two-run
technique test pieces and specimens
in steel
Produits consommables pour le soudage — Méthodes d'essai —
Partie 2: Préparation de pièces d'essai et d'éprouvettes en une ou deux
passes en acier
Reference number
ISO 15792-2:2020(E)
©
ISO 2020
ISO 15792-2:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 15792-2:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 1
5 Test plate material . 1
6 Preparation of the test piece . 2
7 Welding conditions . 3
8 Heat treatment . 3
9 Position of specimens, specimen dimensions and testing . 3
Bibliography . 6
ISO 15792-2:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the
...